Patch "ARM: ux500: Move GPIO regulator for SD-card into board DTSs" has been added to the 3.14-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
ARM: ux500: Move GPIO regulator for SD-card into board DTSs
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-ux500-move-gpio-regulator-for-sd-card-into-board-dtss.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
53d2669844263fd5fdc70f0eb6a2eb8a21086d8eMon Sep 17 00:00:00 2001
From: Ulf Hansson <[email protected]>
Date: Mon, 20 Apr 2015 16:02:31 +0200
Subject: ARM: ux500: Move GPIO regulator for SD-card into board DTSs
From: Ulf Hansson <[email protected]>
commit 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e upstream.
The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but instead it's specific to the board. Move the definition of it, into the board DTSs.
--- arch/arm/boot/dts/ste-dbx5x0.dtsi | 17 ----------------- arch/arm/boot/dts/ste-href.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/ste-snowball.dts | 15 +++++++++++++++ 3 files changed, 32 insertions(+), 17 deletions(-)
arch/arm/boot/dts/ste-dbx5x0.dtsi +0 -17
@@ -985,23 +985,6 @@ status = "disabled"; }; - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - enable-active-high; - - states = <1800000 0x1 - 2900000 0x0>; - - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */
arch/arm/boot/dts/ste-href.dtsi +17 -0
@@ -111,6 +111,23 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>;
arch/arm/boot/dts/ste-snowball.dts +15 -0
@@ -146,8 +146,23 @@ }; vmmci: regulator-gpio { + compatible = "regulator-gpio"; + gpios = <&gpio7 4 0x4>; enable-gpio = <&gpio6 25 0x4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; }; // External Micro SD slot
Patches currently in stable-queue which might be from [email protected] are
queue-3.14/arm-ux500-enable-gpio-regulator-for-sd-card-for-snowball.patch queue-3.14/arm-ux500-move-gpio-regulator-for-sd-card-into-board-dtss.patch queue-3.14/arm-ux500-enable-gpio-regulator-for-sd-card-for-href-boards.patch