wandboard: Add board revision detection support

PATCH Superseded Fabio Estevam 1 participant 1 message May 21, 2015

lore

Share & tools

lore

Fabio Estevam

author

2015-05-21 20:25 UTC #0 lore raw

PATCH 1/1 wandboard: Add board revision detection support

From: Fabio Estevam <[email protected]>

There are two revisions of wandboard: version B1 and C1.

Add the revision detection support, so that the correct dtb file can be correctly loaded.

Based on the patch from Richard Hu <[email protected]>.

Signed-off-by Fabio Estevam <[email protected]>

---
 board/wandboard/wandboard.c | 26 +++++++++++++++++++++++++-
 include/configs/wandboard.h |  8 ++++++--
 2 files changed, 31 insertions(+), 3 deletions(-)

board/wandboard/wandboard.c +25 -1

index 90625ab..0af63d2 100644
@@ -50,6 +50,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define USDHC1_CD_GPIO		IMX_GPIO_NR(1, 2)
 #define USDHC3_CD_GPIO		IMX_GPIO_NR(3, 9)
 #define ETH_PHY_RESET		IMX_GPIO_NR(3, 29)
+#define REV_DETECTION		IMX_GPIO_NR(2, 28)
 
 int dram_init(void)
 {

@@ -105,6 +106,10 @@ static iomux_v3_cfg_t const enet_pads[] = {
 	IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29    | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
+static iomux_v3_cfg_t const rev_detection_pad[] = {
+	IOMUX_PADS(PAD_EIM_EB0__GPIO2_IO28  | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
 static void setup_iomux_uart(void)
 {
 	SETUP_IOMUX_PADS(uart1_pads);

@@ -393,6 +398,17 @@ static const struct boot_mode board_boot_modes[] = {
 };
 #endif
 
+static bool is_revc1(void)
+{
+	SETUP_IOMUX_PADS(rev_detection_pad);
+	gpio_direction_input(REV_DETECTION);
+
+	if (gpio_get_value(REV_DETECTION))
+		return true;
+	else
+		return false;
+}
+
 int board_late_init(void)
 {
 #ifdef CONFIG_CMD_BMODE

@@ -404,6 +420,11 @@ int board_late_init(void)
 		setenv("board_rev", "MX6Q");
 	else
 		setenv("board_rev", "MX6DL");
+
+	if (is_revc1())
+		setenv("board_name", "C1");
+	else
+		setenv("board_name", "B1");
 #endif
 	return 0;
 }

@@ -424,7 +445,10 @@ int board_init(void)
 
 int checkboard(void)
 {
-	puts("Board: Wandboard\n");
+	if (is_revc1())
+		puts("Board: Wandboard rev C1\n");
+	else
+		puts("Board: Wandboard rev B1\n");
 
 	return 0;
 }

include/configs/wandboard.h +6 -2

index 7ce861e..e87ab90 100644
@@ -232,10 +232,14 @@
 			"bootz; " \
 		"fi;\0" \
 	"findfdt="\
-		"if test $board_rev = MX6Q ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
-		"if test $board_rev = MX6DL ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \

Signature · 1 line

1.9.1