Skip to contentSkip to conversation

U-Boot loads and verifies a second U-Boot on beaglebone

U-Boot pratap 2 participants 2 messages May 23, 2015

lore
Share & tools
lore

pratap

author
#0 lore raw

Hi All,
Inspired by simon's advice posted on LWN regarding verifying the
signature of secondary uboot and thereby loading the kernel + devicetree + ramfs.

I would be thankful if i can get reference codebase for beaglebone, as stated below on LWN forum

*"On a BeagleBone Black (OMAP4), it takes about 6ms to verify a configuration and only adds 6.2KB to U-Boot's code size"*

Thanks to simon for the following reference chromeos project:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit;h=b9e8864294d8f2143ce17b4e0d4ba019b6348199

Thanks,
pratap

--
View this message in context: http://u-boot.10912.n7.nabble.com/U-Boot-loads-and-verifies-a-second-U-Boot-on-beaglebone-tp215537.html
Sent from the U-Boot mailing list archive at Nabble.com.

#1 lore raw

Hi,

Quoted 4 lines · pratap [via U-Boot]

Hi All,
Inspired by simon's advice posted on LWN regarding verifying the
signature of secondary uboot and thereby loading the kernel + devicetree + ramfs.

Did you mean to send this to the U-Boot mailing list? It seems to have come via nabble.

Quoted 6 lines

I would be thankful if i can get reference codebase for beaglebone, as stated below on LWN forum

"On a BeagleBone Black (OMAP4), it takes about 6ms to verify a configuration and only adds 6.2KB to U-Boot's code size"

This is in mainline U-Boot - the board configuration used is am335x_boneblack_vboot.

Quoted 5 lines

Thanks to simon for the following reference chromeos project:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit;h=b9e8864294d8f2143ce17b4e0d4ba019b6348199

Regards,
Simon