patch "iio: adis16400: Use != channel indices for the two voltage channels" added to staging-linus

This is a note to let you know that I've just added the patch titled

    iio: adis16400: Use != channel indices for the two voltage channels

to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: Paul Cercueil <[email protected]>
Date: Fri, 15 May 2015 17:18:35 +0200
Subject: iio: adis16400: Use != channel indices for the two voltage channels

Previously, the two voltage channels had the same ID, which didn't cause conflicts in sysfs only because one channel is named and the other isn't; this is still violating the spec though, two indexed channels should never have the same index.

---
 drivers/iio/imu/adis16400_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 8de6427121e2..7b63788c7d1c 100644
@@ -459,10 +459,10 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
-#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si) { \
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
-	.channel = 0, \
+	.channel = chn, \
 	.extend_name = name, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE), \

@@ -479,10 +479,10 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 }
 
 #define ADIS16400_SUPPLY_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
 
 #define ADIS16400_AUX_ADC_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
 
 #define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
 	.type = IIO_ANGL_VEL, \

2.4.1