Skip to contentSkip to conversation

All sort of cdclk stuff

PATCH In review Mika Kahola 8 participants 33 messages Jun 3, 2015 – Oct 6, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v6 cover All sort of cdclk stuff

This patch series rebases Ville's original cdclk patch series
excluding the ones that has already been reviewed.

http://lists.freedesktop.org/archives/intel-gfx/2014-November/055633.html

The patches are rebased to the latest drm-intel-nightly. The major change to the original series is the patch order change for Broadwell and Haswell. Now, the Broadwell CD clock patch can be applied before Haswell CD clock patch. This way, if decided, the CD clock change for Haswell can be discarded without affecting the Broadwell patch.

Based on the received comments, the style problems are now fixed for this patch set.

Ville Syrjälä (8):
drm/i915: Cache current cdclk frequency in dev_priv drm/i915: Use cached cdclk value
drm/i915: Unify ilk and hsw .get_aux_clock_divider drm/i915: Store max cdclk value in dev_priv drm/i915: Don't enable IPS when pixel rate exceeds 95% drm/i915: Add IS_BDW_ULX
drm/i915: BDW clock change support
drm/i915: HSW cdclk support

 drivers/gpu/drm/i915/i915_drv.h      |   5 +-
 drivers/gpu/drm/i915/i915_reg.h      |   4 +
 drivers/gpu/drm/i915/intel_display.c | 406 +++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_dp.c      |  24 +--
 drivers/gpu/drm/i915/intel_drv.h     |   2 +-
 drivers/gpu/drm/i915/intel_pm.c      |  19 +-
 6 files changed, 413 insertions(+), 47 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v6 1/8 drm/i915: Cache current cdclk frequency in dev_priv

From: Ville Syrjälä <[email protected]>

Rather that extracting the current cdclk freuqncy every time someone wants to know it, cache the current value and use that. VLV/CHV already stored a cached value there so just expand that to cover all platforms.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Rebased to the latest
v5: Removed spurious call to 'intel_update_cdclk(dev)' based on
Damien Lespiau's comment

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/intel_display.c +15 -9
index 16e159d..9cf1553 100644
@@ -5747,7 +5747,7 @@ static int valleyview_get_vco(struct drm_i915_private *dev_priv)
 	return vco_freq[hpll_freq] * 1000;
 }
 
-static void vlv_update_cdclk(struct drm_device *dev)
+static void intel_update_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
@@ -5760,7 +5760,14 @@ static void vlv_update_cdclk(struct drm_device *dev)
 	 * BSpec erroneously claims we should aim for 4MHz, but
 	 * in fact 1MHz is the correct frequency.
 	 */
-	I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+	if (IS_VALLEYVIEW(dev)) {
+		/*
+		 * Program the gmbus_freq based on the cdclk frequency.
+		 * BSpec erroneously claims we should aim for 4MHz, but
+		 * in fact 1MHz is the correct frequency.
+		 */
+		I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+	}
 }
 
 /* Adjust CDclk dividers to allow high res or save power if possible */
@@ -5826,7 +5833,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
 
 	mutex_unlock(&dev_priv->sb_lock);
 
-	vlv_update_cdclk(dev);
+	intel_update_cdclk(dev);
 }
 
 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
@@ -5867,7 +5874,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
 	}
 	mutex_unlock(&dev_priv->rps.hw_lock);
 
-	vlv_update_cdclk(dev);
+	intel_update_cdclk(dev);
 }
 
 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
@@ -9479,6 +9486,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
 	}
 
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+	intel_update_cdclk(dev_priv->dev);
 }
 
 /*
@@ -13273,6 +13281,8 @@ static void intel_shared_dpll_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	intel_update_cdclk(dev);
+
 	if (HAS_DDI(dev))
 		intel_ddi_pll_init(dev);
 	else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
@@ -14848,13 +14858,9 @@ static void i915_disable_vga(struct drm_device *dev)
 
 void intel_modeset_init_hw(struct drm_device *dev)
 {
+	intel_update_cdclk(dev);
 	intel_prepare_ddi(dev);
-
-	if (IS_VALLEYVIEW(dev))
-		vlv_update_cdclk(dev);
-
 	intel_init_clock_gating(dev);
-
 	intel_enable_gt_powersave(dev);
 }
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v6 2/8 drm/i915: Use cached cdclk value

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 3 +--
 drivers/gpu/drm/i915/intel_dp.c      | 5 +++--
 drivers/gpu/drm/i915/intel_pm.c      | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -2
index 9cf1553..d1dd8ab 100644
@@ -6610,8 +6610,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 
 	/* FIXME should check pixel clock limits on all platforms */
 	if (INTEL_INFO(dev)->gen < 4) {
-		int clock_limit =
-			dev_priv->display.get_display_clock_speed(dev);
+		int clock_limit = dev_priv->cdclk_freq;
 
 		/*
 		 * Enable pixel doubling when the dot clock
drivers/gpu/drm/i915/intel_dp.c +3 -2
index 6f525093..9a6517d 100644
@@ -708,7 +708,8 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		return 0;
 
 	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
+
 	} else {
 		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
@@ -723,7 +724,7 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
-		return DIV_ROUND_CLOSEST(dev_priv->display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
 	} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
 		/* Workaround for non-ULT HSW */
 		switch (index) {
drivers/gpu/drm/i915/intel_pm.c +1 -1
index eadc15c..5db429e 100644
@@ -1815,7 +1815,7 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
 	linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
 				     mode->crtc_clock);
 	ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
-					 dev_priv->display.get_display_clock_speed(dev_priv->dev));
+					 dev_priv->cdclk_freq);
 
 	return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
 	       PIPE_WM_LINETIME_TIME(linetime);
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 11 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Cheers, Daniel

Quoted 65 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 3 +--
 drivers/gpu/drm/i915/intel_dp.c      | 5 +++--
 drivers/gpu/drm/i915/intel_pm.c      | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -2
index 9cf1553..d1dd8ab 100644
@@ -6610,8 +6610,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 
 	/* FIXME should check pixel clock limits on all platforms */
 	if (INTEL_INFO(dev)->gen < 4) {
-		int clock_limit =
-			dev_priv->display.get_display_clock_speed(dev);
+		int clock_limit = dev_priv->cdclk_freq;
 
 		/*
 		 * Enable pixel doubling when the dot clock
drivers/gpu/drm/i915/intel_dp.c +3 -2
index 6f525093..9a6517d 100644
@@ -708,7 +708,8 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		return 0;
 
 	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
+
 	} else {
 		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
@@ -723,7 +724,7 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
-		return DIV_ROUND_CLOSEST(dev_priv->display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
 	} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
 		/* Workaround for non-ULT HSW */
 		switch (index) {
drivers/gpu/drm/i915/intel_pm.c +1 -1
index eadc15c..5db429e 100644
@@ -1815,7 +1815,7 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
 	linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
 				     mode->crtc_clock);
 	ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
-					 dev_priv->display.get_display_clock_speed(dev_priv->dev));
+					 dev_priv->cdclk_freq);
 
 	return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
 	       PIPE_WM_LINETIME_TIME(linetime);
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 10 lines · Daniel Vetter
Quoted 9 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 2 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Not quite I'm afraid. The CDCLK used in skl_max_scale() has to be part of the atomic state, even bumping CDCLK if possible/needed.

If you use the cached cdclk in skl_max_scale(), it won't do the right thing when CDCLK is off (ie cached frew is the fallback 24Mhz ref clock) and we try to do the first modeset before waking up the display.

I filed a bug about it already to track it:

https://bugs.freedesktop.org/show_bug.cgi?id=90874

Signature · 5 lines
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 22 lines · Damien Lespiau
Quoted 10 lines · Daniel Vetter
Quoted 9 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 2 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Not quite I'm afraid. The CDCLK used in skl_max_scale() has to be part of the atomic state, even bumping CDCLK if possible/needed.

Quoted 7 lines

If you use the cached cdclk in skl_max_scale(), it won't do the right thing when CDCLK is off (ie cached frew is the fallback 24Mhz ref clock) and we try to do the first modeset before waking up the display.

I filed a bug about it already to track it:

   https://bugs.freedesktop.org/show_bug.cgi?id=90874

I know nothing about these specific clocks, but FWIW, my patch was only about enabling new platforms - making skl_max_scale more robust in cases where clock querying does not yet work correctly.

My reasoning was based on a comment from Ville that one of those two clocks must never be lower than the other.

So it sounded reasonable to ignore such cases ie. assume no scaling is possible and allow a normal (unscaled) modeset to succeed rather than fail it and display nothing.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 36 lines · Tvrtko Ursulin
Quoted 22 lines · Damien Lespiau
Quoted 10 lines · Daniel Vetter
Quoted 9 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 2 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Not quite I'm afraid. The CDCLK used in skl_max_scale() has to be part of the atomic state, even bumping CDCLK if possible/needed.

Quoted 7 lines

If you use the cached cdclk in skl_max_scale(), it won't do the right thing when CDCLK is off (ie cached frew is the fallback 24Mhz ref clock) and we try to do the first modeset before waking up the display.

I filed a bug about it already to track it:

https://bugs.freedesktop.org/show_bug.cgi?id=90874

I know nothing about these specific clocks, but FWIW, my patch was only about enabling new platforms - making skl_max_scale more robust in cases where clock querying does not yet work correctly.

Quoted 6 lines

My reasoning was based on a comment from Ville that one of those two clocks must never be lower than the other.

So it sounded reasonable to ignore such cases ie. assume no scaling is possible and allow a normal (unscaled) modeset to succeed rather than fail it and display nothing.

So to be more specific, I believe this is because we detect CDCLK as being "disabled" or on the ref clock in simulation?

Generally speaking, it's questionable if we want to work around such limitations in the code like that, I'd rather go for defaulting to max CDCLK in simulation.

In this particular case, we really shouldn't get cdclk < crtc_clock at this point, I'd expect the cdclk we use (probably part of the atomic state) to be bumped to cover crtc_clock prior to plane checks (See Marteen's [PATCH v3 19/19] drm/i915: Make cdclk part of the atomic state.), I guess we could add a WARN_ON(cdclk < crtc_clock) in skl_max_scale() to ensure that's indeed the case?

Signature · 5 lines
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 40 lines · Damien Lespiau
Quoted 39 lines · Tvrtko Ursulin
Quoted 22 lines · Damien Lespiau
Quoted 10 lines · Daniel Vetter
Quoted 9 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 2 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Not quite I'm afraid. The CDCLK used in skl_max_scale() has to be part of the atomic state, even bumping CDCLK if possible/needed.

Quoted 7 lines

If you use the cached cdclk in skl_max_scale(), it won't do the right thing when CDCLK is off (ie cached frew is the fallback 24Mhz ref clock) and we try to do the first modeset before waking up the display.

I filed a bug about it already to track it:

   https://bugs.freedesktop.org/show_bug.cgi?id=90874

I know nothing about these specific clocks, but FWIW, my patch was only about enabling new platforms - making skl_max_scale more robust in cases where clock querying does not yet work correctly.

My reasoning was based on a comment from Ville that one of those two clocks must never be lower than the other.

Quoted 6 lines
Quoted 3 lines

So it sounded reasonable to ignore such cases ie. assume no scaling is possible and allow a normal (unscaled) modeset to succeed rather than fail it and display nothing.

So to be more specific, I believe this is because we detect CDCLK as being "disabled" or on the ref clock in simulation?

Probably a reference clock. It definitely wasn't zero since skl_max_scale already handles that. But I forgot the exact details.

Quoted 10 lines

Generally speaking, it's questionable if we want to work around such limitations in the code like that, I'd rather go for defaulting to max CDCLK in simulation.

In this particular case, we really shouldn't get cdclk < crtc_clock at this point, I'd expect the cdclk we use (probably part of the atomic state) to be bumped to cover crtc_clock prior to plane checks (See Marteen's [PATCH v3 19/19] drm/i915: Make cdclk part of the atomic state.), I guess we could add a WARN_ON(cdclk < crtc_clock) in skl_max_scale() to ensure that's indeed the case?

WARN_ON sounds fine to me. For the other considerations - you're the expert. :)

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

In reply to Daniel Vetter
Quoted 21 lines

-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Monday, June 15, 2015 2:55 PM
To: Kahola, Mika
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 11 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 6 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Cheers, Daniel

Jani has pushed these patches already so maybe this is an item for a separate patch?

Cheers,
Mika

Quoted 70 lines

drivers/gpu/drm/i915/intel_dp.c static uint32_t ilk_get_aux_clock_divider(struct

Quoted 30 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 3 +--
 drivers/gpu/drm/i915/intel_dp.c      | 5 +++--
 drivers/gpu/drm/i915/intel_pm.c      | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -2
index 9cf1553..d1dd8ab 100644
@@ -6610,8 +6610,7 @@ static int intel_crtc_compute_config(struct
 intel_crtc *crtc,
 
 	/* FIXME should check pixel clock limits on all platforms */
 	if (INTEL_INFO(dev)->gen < 4) {
-		int clock_limit =
-			dev_priv->display.get_display_clock_speed(dev);
+		int clock_limit = dev_priv->cdclk_freq;
 
 		/*

* Enable pixel doubling when the dot clock diff --git
a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 6f525093..9a6517d 100644

drivers/gpu/drm/i915/intel_dp.c +0 -0
@@ -708,7 +708,8 @@ static uint32_t ilk_get_aux_clock_divider(struct

intel_dp *intel_dp, int index)

drivers/gpu/drm/i915/intel_dp.c static uint32_t hsw_get_aux_clock_divider(struct

Quoted 11 lines
drivers/gpu/drm/i915/intel_dp.c +2 -1
 		return 0;
 
 	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv-
 display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
+
 	} else {
 		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
drivers/gpu/drm/i915/intel_dp.c +0 -0
 	}
@@ -723,7 +724,7 @@ static uint32_t hsw_get_aux_clock_divider(struct

intel_dp *intel_dp, int index)

drivers/gpu/drm/i915/intel_pm.c hsw_compute_linetime_wm(struct drm_device

Quoted 14 lines
drivers/gpu/drm/i915/intel_dp.c +1 -1
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
-		return DIV_ROUND_CLOSEST(dev_priv-
 display.get_display_clock_speed(dev), 2000);
+		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
 	} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
 		/* Workaround for non-ULT HSW */
drivers/gpu/drm/i915/intel_dp.c +0 -0
 		switch (index) {
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/intel_pm.c index eadc15c..5db429e 100644

drivers/gpu/drm/i915/intel_pm.c +0 -0
@@ -1815,7 +1815,7 @@ hsw_compute_linetime_wm(struct drm_device

*dev, struct drm_crtc *crtc)

Quoted 12 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
 	linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
 				     mode->crtc_clock);
 	ips_linetime = DIV_ROUND_CLOSEST(mode->crtc_htotal * 1000 * 8,
-					 dev_priv-
 display.get_display_clock_speed(dev_priv->dev));
+					 dev_priv->cdclk_freq);
 
 	return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |

PIPE_WM_LINETIME_TIME(linetime);
--
1.9.1

Quoted 9 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 21 lines · Mika
Quoted 21 lines

-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Monday, June 15, 2015 2:55 PM
To: Kahola, Mika
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 11 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 6 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Cheers, Daniel

Jani has pushed these patches already so maybe this is an item for a separate patch?

Yeah that's what I've meant with extending. Please work together with Damien and Chandra and Maarten in figuring out what exactly is needed here.

Thanks, Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 27 lines · Daniel Vetter
Quoted 26 lines · Mika
Quoted 26 lines

-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Monday, June 15, 2015 2:55 PM
To: Kahola, Mika
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 11 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Quoted 6 lines
Quoted 2 lines
Quoted 1 line

Cheers, Daniel

Jani has pushed these patches already so maybe this is an item for a separate patch?

Yeah that's what I've meant with extending. Please work together with Damien and Chandra and Maarten in figuring out what exactly is needed here.

I think Maarten has it already covered in:

[PATCH v3 19/19] drm/i915: Make cdclk part of the atomic state.

but I probably should test it :)

Signature · 5 lines
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

Re: [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 46 lines

-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Damien Lespiau
Sent: Monday, June 15, 2015 6:15 AM
To: Daniel Vetter
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 22 lines · Daniel Vetter
Quoted 21 lines · Mika
Quoted 21 lines

-----Original Message-----
From: Daniel Vetter [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Monday, June 15, 2015 2:55 PM
To: Kahola, Mika
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCH v6 2/8] drm/i915: Use cached cdclk value

Quoted 11 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Rather than reading out the current cdclk value use the cached value we have tucked away in dev_priv.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

This patch needs to be extended to also cover the recently added skl_max_scale. Tvrtko has recently written a patch to add some checks to that code too, would be good to resurrect that too. Chandra can help with any questions wrt the skl scaler code.

Cheers, Daniel

Jani has pushed these patches already so maybe this is an item for a separate

patch?

Quoted 4 lines

Yeah that's what I've meant with extending. Please work together with Damien and Chandra and Maarten in figuring out what exactly is needed here.

Quoted 5 lines

I think Maarten has it already covered in:

[PATCH v3 19/19] drm/i915: Make cdclk part of the atomic state.

but I probably should test it :)

Yes, cdclk < crtc_clock shouldn't happen this late unless one of the value is stale (cdclk?).

Checked Maarten's other patch, and it should address this issue.

Quoted 7 lines

--
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

PATCH v6 3/8 drm/i915: Unify ilk and hsw .get_aux_clock_divider

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

ilk_get_aux_clock_divider() is now a subset of
hsw_get_aux_clock_divider() so unify them.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_dp.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -20
index 9a6517d..959f115 100644
@@ -704,23 +704,6 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (index)
-		return 0;
-
-	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
-
-	} else {
-		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
-	}
-}
-
-static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-{
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
@@ -733,7 +716,9 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		default: return 0;
 		}
 	} else  {
-		return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+		if (index)
+			return 0;
+		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
 }
 
@@ -5746,8 +5731,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
 	else if (IS_VALLEYVIEW(dev))
 		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
-	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
 	else if (HAS_PCH_SPLIT(dev))
 		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
 	else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#13 lore raw

Re: [PATCH v6 3/8] drm/i915: Unify ilk and hsw .get_aux_clock_divider

Quoted 4 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

ilk_get_aux_clock_divider() is now a subset of
hsw_get_aux_clock_divider() so unify them.

I do like the clarity of having these two separate, especially with the early return in the ilk version and the w/a in the hsw/bdw version.

Moreover there's the subtle round up vs. closest difference, and a history of aux bugs...

I'm dropping this one, doesn't seem to affect later patches.

BR,
Jani.

Quoted 68 lines

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_dp.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -20
index 9a6517d..959f115 100644
@@ -704,23 +704,6 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (index)
-		return 0;
-
-	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
-
-	} else {
-		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
-	}
-}
-
-static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-{
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
@@ -733,7 +716,9 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		default: return 0;
 		}
 	} else  {
-		return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+		if (index)
+			return 0;
+		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
 }
 
@@ -5746,8 +5731,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
 	else if (IS_VALLEYVIEW(dev))
 		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
-	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
 	else if (HAS_PCH_SPLIT(dev))
 		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
 	else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

Re: [PATCH v6 3/8] drm/i915: Unify ilk and hsw .get_aux_clock_divider

Quoted 7 lines · Jani Nikula
Quoted 4 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

ilk_get_aux_clock_divider() is now a subset of
hsw_get_aux_clock_divider() so unify them.

I do like the clarity of having these two separate,

I see no clarity. Just pointless duplication which risks different bugs in different subsets of the platforms.

Quoted 4 lines

especially with the
early return in the ilk version and the w/a in the hsw/bdw version Moreover there's the subtle round up vs. closest difference, and a history of aux bugs...

The up vs. closest makes no difference for ILK-IVB since the cdclk is either 450 or 400 MHz. Anyway I suppose we should just change them all to use DIV_ROUND_CLOSEST().

Quoted 2 lines

I'm dropping this one, doesn't seem to affect later patches.

No biggie. But I'm fairly sure I'll eventually send patches to store the rawclk in dev_priv, at which point I'll propose killing all of these (well, maybe settling for skl+ vs. the rest).

Quoted 80 lines

BR,
Jani.

Quoted 68 lines

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_dp.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -20
index 9a6517d..959f115 100644
@@ -704,23 +704,6 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (index)
-		return 0;
-
-	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
-
-	} else {
-		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
-	}
-}
-
-static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-{
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
@@ -733,7 +716,9 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		default: return 0;
 		}
 	} else  {
-		return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+		if (index)
+			return 0;
+		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
 }
 
@@ -5746,8 +5731,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
 	else if (IS_VALLEYVIEW(dev))
 		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
-	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
 	else if (HAS_PCH_SPLIT(dev))
 		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
 	else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#15 lore raw

Re: [PATCH v6 3/8] drm/i915: Unify ilk and hsw .get_aux_clock_divider

Quoted 11 lines · Ville Syrjälä
Quoted 7 lines · Jani Nikula
Quoted 4 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

ilk_get_aux_clock_divider() is now a subset of
hsw_get_aux_clock_divider() so unify them.

I do like the clarity of having these two separate,

I see no clarity. Just pointless duplication which risks different bugs in different subsets of the platforms.

I'm only replying because this is a much larger discussion than just this patch.

The way I see it, it's currently more likely that we'll have subtle platform specific bugs because of a bunch of if conditions in functions combined for the sake of deduplicating 10 lines. When we add more conditions to such combined functions, it's more likely that we introduce bugs to platforms we didn't even intend to touch.

The ilk+ code returns early for index != 0. Hey, one subsecond glance and you know there are no retries.

The ilk+ code does not check for a PCH ID which it doesn't ship with. One fewer brief WTF pauses while reading the code.

When you read the code, it's most often not just these lowest level functions. It's a bigger context, and each step here adds to a cognitive burden you have to carry. If you have to consider more stuff, you'll swap out something else, and it becomes harder and slower.

As a whole, this is hard stuff, and the readability has to be at a level where you don't have to pause to wonder what's going on. It all adds up.

BR,
Jani.

Quoted 100 lines
Quoted 4 lines

especially with the
early return in the ilk version and the w/a in the hsw/bdw version Moreover there's the subtle round up vs. closest difference, and a history of aux bugs...

The up vs. closest makes no difference for ILK-IVB since the cdclk is either 450 or 400 MHz. Anyway I suppose we should just change them all to use DIV_ROUND_CLOSEST().

Quoted 2 lines

I'm dropping this one, doesn't seem to affect later patches.

No biggie. But I'm fairly sure I'll eventually send patches to store the rawclk in dev_priv, at which point I'll propose killing all of these (well, maybe settling for skl+ vs. the rest).

Quoted 80 lines

BR,
Jani.

Quoted 68 lines

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_dp.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +3 -20
index 9a6517d..959f115 100644
@@ -704,23 +704,6 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (index)
-		return 0;
-
-	if (intel_dig_port->port == PORT_A) {
-		return DIV_ROUND_UP(dev_priv->cdclk_freq, 2000);
-
-	} else {
-		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
-	}
-}
-
-static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-{
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	if (intel_dig_port->port == PORT_A) {
 		if (index)
 			return 0;
@@ -733,7 +716,9 @@ static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 		default: return 0;
 		}
 	} else  {
-		return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+		if (index)
+			return 0;
+		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
 	}
 }
 
@@ -5746,8 +5731,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
 	else if (IS_VALLEYVIEW(dev))
 		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
-	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
 	else if (HAS_PCH_SPLIT(dev))
 		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
 	else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#16 lore raw

PATCH v6 4/8 drm/i915: Store max cdclk value in dev_priv

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

Keep the cdclk maximum supported frequency around in dev_priv so that we can verify certain things against it before actually changing the cdclk frequency.

For now only VLV/CHV have support changing cdclk frequency, so other plarforms get to assume cdclk is fixed.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_drv.h      |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 20 +++++++++++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -1
index 60aa962..db9e268 100644
@@ -1743,7 +1743,7 @@ struct drm_i915_private {
 
 	unsigned int fsb_freq, mem_freq, is_ddr3;
 	unsigned int skl_boot_cdclk;
-	unsigned int cdclk_freq;
+	unsigned int cdclk_freq, max_cdclk_freq;
 	unsigned int hpll_freq;
 
 	/**
drivers/gpu/drm/i915/intel_display.c +19 -1
index d1dd8ab..445385d 100644
@@ -5747,6 +5747,21 @@ static int valleyview_get_vco(struct drm_i915_private *dev_priv)
 	return vco_freq[hpll_freq] * 1000;
 }
 
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_VALLEYVIEW(dev)) {
+		dev_priv->max_cdclk_freq = 400000;
+	} else {
+		/* otherwise assume cdclk is fixed */
+		dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+	}
+
+	DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+			 dev_priv->max_cdclk_freq);
+}
+
 static void intel_update_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5768,6 +5783,9 @@ static void intel_update_cdclk(struct drm_device *dev)
 		 */
 		I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
 	}
+
+	if (dev_priv->max_cdclk_freq == 0)
+		intel_update_max_cdclk(dev);
 }
 
 /* Adjust CDclk dividers to allow high res or save power if possible */
@@ -6610,7 +6628,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 
 	/* FIXME should check pixel clock limits on all platforms */
 	if (INTEL_INFO(dev)->gen < 4) {
-		int clock_limit = dev_priv->cdclk_freq;
+		int clock_limit = dev_priv->max_cdclk_freq;
 
 		/*
 		 * Enable pixel doubling when the dot clock
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

PATCH v6 5/8 drm/i915: Don't enable IPS when pixel rate exceeds 95%

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

Bspec says we shouldn't enable IPS on BDW when the pipe pixel rate exceeds 95% of the core display clock. Apparently this can cause underruns.

There's no similar restriction listed for HSW, so leave that one alone for now.

v2: Add pipe_config_supports_ips() (Chris)
v3: Compare against the max cdclk insted of the current cdclk
v4: Rebased to the latest
v5: Rebased to the latest
v6: Fix for patch style problems

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83497

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/intel_display.c | 30 ++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |  2 +-
 drivers/gpu/drm/i915/intel_pm.c      | 17 ++++++++---------
 3 files changed, 37 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +28 -2
index 445385d..c3f01aa 100644
@@ -6610,12 +6610,38 @@ retry:
 	return ret;
 }
 
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+				     struct intel_crtc_state *pipe_config)
+{
+	if (pipe_config->pipe_bpp > 24)
+		return false;
+
+	/* HSW can handle pixel rate up to cdclk? */
+	if (IS_HASWELL(dev_priv->dev))
+		return true;
+
+	/*
+	 * FIXME if we compare against max we should then
+	 * increase the cdclk frequency when the current
+	 * value is too low. The other option is to compare
+	 * against the cdclk frequency we're going have post
+	 * modeset (ie. one we computed using other constraints).
+	 * Need to measure whether using a lower cdclk w/o IPS
+	 * is better or worse than a higher cdclk w/ IPS.
+	 */
+	return ilk_pipe_pixel_rate(pipe_config) <=
+		dev_priv->max_cdclk_freq * 95 / 100;
+}
+
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config)
 {
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
 	pipe_config->ips_enabled = i915.enable_ips &&
-				   hsw_crtc_supports_ips(crtc) &&
-				   pipe_config->pipe_bpp <= 24;
+		hsw_crtc_supports_ips(crtc) &&
+		pipe_config_supports_ips(dev_priv, pipe_config);
 }
 
 static int intel_crtc_compute_config(struct intel_crtc *crtc,
drivers/gpu/drm/i915/intel_drv.h +1 -1
index 2afb31a..5cb3004 100644
@@ -1375,7 +1375,7 @@ void ilk_wm_get_hw_state(struct drm_device *dev);
 void skl_wm_get_hw_state(struct drm_device *dev);
 void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
 			  struct skl_ddb_allocation *ddb /* out */);
-
+uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config);
 
 /* intel_sdvo.c */
 bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
drivers/gpu/drm/i915/intel_pm.c +8 -9
index 5db429e..d091fec 100644
@@ -1434,23 +1434,22 @@ static void i845_update_wm(struct drm_crtc *unused_crtc)
 	I915_WRITE(FW_BLC, fwater_lo);
 }
 
-static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
-				    struct drm_crtc *crtc)
+uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	uint32_t pixel_rate;
 
-	pixel_rate = intel_crtc->config->base.adjusted_mode.crtc_clock;
+	pixel_rate = pipe_config->base.adjusted_mode.crtc_clock;
 
 	/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
 	 * adjust the pixel_rate here. */
 
-	if (intel_crtc->config->pch_pfit.enabled) {
+	if (pipe_config->pch_pfit.enabled) {
 		uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
-		uint32_t pfit_size = intel_crtc->config->pch_pfit.size;
+		uint32_t pfit_size = pipe_config->pch_pfit.size;
+
+		pipe_w = pipe_config->pipe_src_w;
+		pipe_h = pipe_config->pipe_src_h;
 
-		pipe_w = intel_crtc->config->pipe_src_w;
-		pipe_h = intel_crtc->config->pipe_src_h;
 		pfit_w = (pfit_size >> 16) & 0xFFFF;
 		pfit_h = pfit_size & 0xFFFF;
 		if (pipe_w < pfit_w)
@@ -2066,7 +2065,7 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 
 	p->active = true;
 	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
-	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
+	p->pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
 
 	if (crtc->primary->state->fb)
 		p->pri.bytes_per_pixel =
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#18 lore raw

PATCH v6 6/8 drm/i915: Add IS_BDW_ULX

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

We need to tell BDW ULT and ULX apart.

v2: Rebased to the latest
v3: Rebased to the latest
v4: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_drv.h | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +3 -0
index db9e268..46722f8 100644
@@ -2399,6 +2399,9 @@ struct drm_i915_cmd_table {
 				 ((INTEL_DEVID(dev) & 0xf) == 0x6 ||	\
 				 (INTEL_DEVID(dev) & 0xf) == 0xb ||	\
 				 (INTEL_DEVID(dev) & 0xf) == 0xe))
+/* ULX machines are also considered ULT. */
+#define IS_BDW_ULX(dev)		(IS_BROADWELL(dev) && \
+				 (INTEL_DEVID(dev) & 0xf) == 0xe)
 #define IS_BDW_GT3(dev)		(IS_BROADWELL(dev) && \
 				 (INTEL_DEVID(dev) & 0x00F0) == 0x0020)
 #define IS_HSW_ULT(dev)		(IS_HASWELL(dev) && \
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#19 lore raw

PATCH v6 7/8 drm/i915: BDW clock change support

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10

246 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#20 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#21 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

and everything works for the commit before that.

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#22 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 33 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

Quoted 7 lines

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

and everything works for the commit before that.

Anyone working on this, or should we revert?

BR,
Jani.

Quoted 309 lines

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#23 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 38 lines · Jani Nikula
Quoted 37 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300
Quoted 9 lines
Quoted 3 lines

drm/i915: BDW clock change support

and everything works for the commit before that.

Anyone working on this, or should we revert?

BR,
Jani.

My understanding is that Ville has an idea or how to fix this.

Cheers,
Mika

Quoted 308 lines
Quoted 308 lines

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Quoted 5 lines
Quoted 2 lines
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#24 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 41 lines · Mika Kahola
Quoted 40 lines · Jani Nikula
Quoted 39 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

Quoted 8 lines
Quoted 7 lines
Quoted 1 line

and everything works for the commit before that.

Anyone working on this, or should we revert?

BR,
Jani.

My understanding is that Ville has an idea or how to fix this.

Ville, when do you think we can convert the idea into a patch? Should we revert in the mean time?

BR,
Jani.

Quoted 319 lines

Cheers,
Mika

Quoted 313 lines
Quoted 310 lines

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#25 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 46 lines · Jani Nikula
Quoted 45 lines · Mika Kahola
Quoted 44 lines · Jani Nikula
Quoted 33 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

Quoted 7 lines

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

and everything works for the commit before that.

Anyone working on this, or should we revert?

Quoted 7 lines
Quoted 4 lines
Quoted 3 lines

BR,
Jani.

My understanding is that Ville has an idea or how to fix this.

Ville, when do you think we can convert the idea into a patch? Should we revert in the mean time?

I was thinking it may have been atomic making a mess of things and enabling planes while the pipe was off. But I may be totally off here since the current atomic code doesn't agree with my brain at all.

So no, I have no patch to fix it. Someone needs to first check where exactly the hang happens.

Quoted 328 lines

BR,
Jani.

Quoted 319 lines

Cheers,
Mika

Quoted 313 lines
Quoted 310 lines

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#26 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support

Quoted 55 lines · Ville Syrjälä
Quoted 46 lines · Jani Nikula
Quoted 45 lines · Mika Kahola
Quoted 44 lines · Jani Nikula
Quoted 33 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

Quoted 7 lines

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

and everything works for the commit before that.

Anyone working on this, or should we revert?

Quoted 7 lines
Quoted 4 lines
Quoted 3 lines

BR,
Jani.

My understanding is that Ville has an idea or how to fix this.

Ville, when do you think we can convert the idea into a patch? Should we revert in the mean time?

Quoted 6 lines

I was thinking it may have been atomic making a mess of things and enabling planes while the pipe was off. But I may be totally off here since the current atomic code doesn't agree with my brain at all.

So no, I have no patch to fix it. Someone needs to first check where exactly the hang happens.

We do have evidence that at least the code in 4.2 does touch planes when the pipe is off. Linus has backtraces at least.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#27 lore raw

Re: [PATCH v6 7/8] drm/i915: BDW clock change support [regression]

In reply to Jani Nikula
Quoted 33 lines · Jani Nikula
Quoted 21 lines · Jani Nikula
Quoted 17 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Add support for changing cdclk frequency during runtime on BDW. The procedure is quite a bit different on BDW from the one on HSW, so add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk, so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Rebased to the latest
v6: Patch order shuffle so that Broadwell CD clock change is
applied before the patch for Haswell CD clock change
v7: Fix for patch style problems

Quoted 2 lines
Quoted 8 lines

This patch hard hangs my BDW NUC at boot when both DP and HDMI are connected. Either DP or HDMI alone are good, same with hotplugging the other afterwards. Booting to grub with both connected, and unplugging HDMI before loading the kernel also reproduces the issue.

It looks like the problem boils down to the BIOS setting up a smaller resolution on the DP display when both are connected, and this patch fails to cope with that on i915 load.

By "this patch" I obviously refer to

Quoted 7 lines

commit b432e5cfd5e92127ad2dd83bfc3083f1dbce43fb

Author: Ville Syrjälä <[email protected]>
Date:   Wed Jun 3 15:45:13 2015 +0300

drm/i915: BDW clock change support

and everything works for the commit before that.

Another regression for Jairo to track. Jairo please add the bisect result to the bugzilla and mark it as bisected too.

Thanks, Daniel

Quoted 313 lines

BR,
Jani.

Quoted 298 lines

BR,
Jani.

Quoted 289 lines

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 216 +++++++++++++++++++++++++++++++++--
 2 files changed, 208 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 7213224..0f72c0e 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
@@ -7170,6 +7171,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_ROOT_CD_CLOCK_DISABLE	(1<<24)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 #define  LCPLL_POWER_DOWN_ALLOW		(1<<22)
 #define  LCPLL_CD_SOURCE_FCLK		(1<<21)
drivers/gpu/drm/i915/intel_display.c +206 -10
index c3f01aa..b1e2069 100644
@@ -5751,7 +5751,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->max_cdclk_freq = 400000;
 	} else {
 		/* otherwise assume cdclk is fixed */
@@ -6621,13 +6636,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9608,6 +9621,182 @@ static void broxton_modeset_global_resources(struct drm_atomic_state *old_state)
 		broxton_set_cdclk(dev, req_cdclk);
 }
 
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	int max_pixel_rate = 0;
+	int pixel_rate;
+
+	for_each_crtc(dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
+	}
+
+	return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500)
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq)
+		broadwell_set_cdclk(dev, req_cdclk);
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12788,8 +12977,12 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
-		ret = valleyview_modeset_global_pipes(state);
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+			ret = valleyview_modeset_global_pipes(state);
+		else
+			ret = broadwell_modeset_global_pipes(state);
+
 		if (ret)
 			return ret;
 	}
@@ -14677,6 +14870,9 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		if (IS_BROADWELL(dev))
+			dev_priv->display.modeset_global_resources =
+				broadwell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#28 lore raw

PATCH v6 8/8 drm/i915: HSW cdclk support

In reply to Mika Kahola

From: Ville Syrjälä <[email protected]>

Implement support for changing the cdclk frequency during runtime on HSW. VLV/CHV already have support for this, so we can follow their example for the most part. Only the actual hardware programming differs, the rest is pretty much the same.

The pipe pixel rate stuff is handled a bit differently for now due to the difference in pch vs. gmch pfit handling. Eventually we should unify that part to eliminate what is essentially duplicated code.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Reformatting 'haswell_modeset_global_pipes' function to
support atomic state
v6: Shuffling the patch order so the Broadwell CD clock patch
can be applied before this Haswell CD clock patch
v7: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 137 ++++++++++++++++++++++++++++++++++-
 2 files changed, 136 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 0f72c0e..418d149 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
 #define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
@@ -7167,6 +7168,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_PLL_LOCK			(1<<30)
 #define  LCPLL_CLK_FREQ_MASK		(3<<26)
 #define  LCPLL_CLK_FREQ_450		(0<<26)
+#define  LCPLL_CLK_FREQ_ALT_HSW		(1<<26) /* 337.5 (ULX) or 540 */
 #define  LCPLL_CLK_FREQ_54O_BDW		(1<<26)
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
drivers/gpu/drm/i915/intel_display.c +134 -3

170 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tested-by on v6 8/8
#29 lore raw

Re: [PATCH v6 8/8] drm/i915: HSW cdclk support

Task id: 6530 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied

PNV                                  276/276              276/276
ILK                                  303/303              303/303
SNB                 -1              315/315              314/315
IVB                                  343/343              343/343
BYT                                  287/287              287/287
BDW                                  321/321              321/321

-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
*SNB igt@pm_rpm@dpms-mode-unset-non-lpsp PASS(1) DMESG_WARN(1)
(dmesg patch applied)WARNING:at_drivers/gpu/drm/i915/intel_uncore.c:#assert_device_not_suspended[i915]()@WARNING:.* at .* assert_device_not_suspended+0x
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#30 lore raw

Re: [PATCH v6 8/8] drm/i915: HSW cdclk support

In reply to Mika Kahola
Quoted 6 lines · Mika Kahola

From: Ville Syrjälä <[email protected]>

Implement support for changing the cdclk frequency during runtime on HSW. VLV/CHV already have support for this, so we can follow their example for the most part. Only the actual hardware programming differs, the rest is pretty much the same.

I'm chickening out of this one. Thanks to the new patch ordering we can return to it later if needed.

BR,
Jani.

Quoted 229 lines

The pipe pixel rate stuff is handled a bit differently for now due to the difference in pch vs. gmch pfit handling. Eventually we should unify that part to eliminate what is essentially duplicated code.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering
v4: Rebased to the latest
v5: Reformatting 'haswell_modeset_global_pipes' function to
support atomic state
v6: Shuffling the patch order so the Broadwell CD clock patch
can be applied before this Haswell CD clock patch
v7: Fix for patch style problems

Author: Ville Syrjälä <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_display.c | 137 ++++++++++++++++++++++++++++++++++-
 2 files changed, 136 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 0f72c0e..418d149 100644
@@ -6705,6 +6705,7 @@ enum skl_disp_power_wells {
 #define	  GEN6_PCODE_READ_RC6VIDS		0x5
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
+#define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
 #define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
@@ -7167,6 +7168,7 @@ enum skl_disp_power_wells {
 #define  LCPLL_PLL_LOCK			(1<<30)
 #define  LCPLL_CLK_FREQ_MASK		(3<<26)
 #define  LCPLL_CLK_FREQ_450		(0<<26)
+#define  LCPLL_CLK_FREQ_ALT_HSW		(1<<26) /* 337.5 (ULX) or 540 */
 #define  LCPLL_CLK_FREQ_54O_BDW		(1<<26)
 #define  LCPLL_CLK_FREQ_337_5_BDW	(2<<26)
 #define  LCPLL_CLK_FREQ_675_BDW		(3<<26)
drivers/gpu/drm/i915/intel_display.c +134 -3
index b1e2069..4b9907d 100644
@@ -5751,7 +5751,16 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_BROADWELL(dev))  {
+	if (IS_HASWELL(dev)) {
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_HSW_ULX(dev))
+			dev_priv->max_cdclk_freq = 337500;
+		else if (IS_HSW_ULT(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else
+			dev_priv->max_cdclk_freq = 540000;
+	} else if (IS_BROADWELL(dev))  {
 		/*
 		 * FIXME with extra cooling we can allow
 		 * 540 MHz for ULX and 675 Mhz for ULT.
@@ -9755,6 +9764,80 @@ static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
 	return cdclk;
 }
 
+static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		break;
+	case 337500:
+	case 540000:
+		val |= LCPLL_CLK_FREQ_ALT_HSW;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (IS_HSW_ULX(dev)) {
+		mutex_lock(&dev_priv->rps.hw_lock);
+		sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
+					cdclk == 337500);
+		mutex_unlock(&dev_priv->rps.hw_lock);
+	}
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
+static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
+			      int max_pixel_rate)
+{
+	int cdclk;
+
+	/*
+	 * FIXME should also account for plane ratio
+	 * once 64bpp pixel formats are supported.
+	 */
+	if (max_pixel_rate > 450000)
+		cdclk = 540000;
+	else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
+		cdclk = 450000;
+	else
+		cdclk = 337500;
+
+	/*
+	 * FIXME move the cdclk caclulation to
+	 * compute_config() so we can fail gracegully.
+	 */
+	if (cdclk > dev_priv->max_cdclk_freq) {
+		DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+			  cdclk, dev_priv->max_cdclk_freq);
+		cdclk = dev_priv->max_cdclk_freq;
+	}
+
+	return cdclk;
+}
+
 static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->dev);
@@ -9797,6 +9880,49 @@ static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
 		broadwell_set_cdclk(dev, req_cdclk);
 }
 
+static int haswell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int max_pixclk = ilk_max_pixel_rate(dev_priv);
+	int cdclk, i;
+
+	cdclk = haswell_calc_cdclk(dev_priv, max_pixclk);
+
+	if (cdclk == dev_priv->cdclk_freq)
+		return 0;
+
+	/* add all active pipes to the state */
+	for_each_crtc(state->dev, crtc) {
+		if (!crtc->state->enable)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	/* disable/enable all currently active pipes while we change cdclk */
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		if (crtc_state->enable)
+			crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+static void haswell_modeset_global_resources(struct drm_atomic_state *state)
+{
+	struct drm_device *dev = state->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+	int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
+
+	if (req_cdclk != dev_priv->cdclk_freq) {
+		haswell_set_cdclk(dev, req_cdclk);
+	}
+}
+
 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
 				      struct intel_crtc_state *crtc_state)
 {
@@ -12977,11 +13103,13 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev) || IS_HASWELL(dev)) {
 		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
 			ret = valleyview_modeset_global_pipes(state);
-		else
+		else if (IS_BROADWELL(dev))
 			ret = broadwell_modeset_global_pipes(state);
+		else
+			ret = haswell_modeset_global_pipes(state);
 
 		if (ret)
 			return ret;
@@ -14873,6 +15001,9 @@ static void intel_init_display(struct drm_device *dev)
 		if (IS_BROADWELL(dev))
 			dev_priv->display.modeset_global_resources =
 				broadwell_modeset_global_resources;
+		else
+			dev_priv->display.modeset_global_resources =
+				haswell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on the v6 series
#31 lore raw
In reply to Mika Kahola
Quoted 5 lines · Mika Kahola

This patch series rebases Ville's original cdclk patch series
excluding the ones that has already been reviewed.

http://lists.freedesktop.org/archives/intel-gfx/2014-November/055633.html

Quoted 8 lines

The patches are rebased to the latest drm-intel-nightly. The major change to the original series is the patch order change for Broadwell and Haswell. Now, the Broadwell CD clock patch can be applied before Haswell CD clock patch. This way, if decided, the CD clock change for Haswell can be discarded without affecting the Broadwell patch.

Based on the received comments, the style problems are now fixed for this patch set.

For the whole series:

Signature · 5 lines
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#32 lore raw
Quoted 12 lines · Damien Lespiau
Quoted 11 lines · Mika Kahola

This patch series rebases Ville's original cdclk patch series
excluding the ones that has already been reviewed.

http://lists.freedesktop.org/archives/intel-gfx/2014-November/055633.html

The patches are rebased to the latest drm-intel-nightly. The major change to the original series is the patch order change for Broadwell and Haswell. Now, the Broadwell CD clock patch can be applied before Haswell CD clock patch. This way, if decided, the CD clock change for Haswell can be discarded without affecting the Broadwell patch.

Quoted 6 lines
Quoted 2 lines

Based on the received comments, the style problems are now fixed for this patch set.

For the whole series:

Pushed all except 3 and 8 to drm-intel-next-queued, thanks for the patches and review.

BR,
Jani.

Quoted 7 lines
Signature · 6 lines
-- 
Damien
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx