ASoC: wm8741: Allow master clock switching
Subsystems (3)
RFC PATCH 1/1 ASoC: wm8741: Allow master clock switching
The set of supported sample rates depends on the master clock supplied to the codec. Allow the machine driver to set the required master clock in hw_params().
---
This patch has been tested on a board with two master clocks, 22.5792MHz (for 44.1kHz, 88.2kHz, ...) and 24.576MHz (for 48kHz, 96kHz, ...).
sound/soc/codecs/wm8741.c | 63 +++++++++++++---------------------------------- 1 file changed, 17 insertions(+), 46 deletions(-)
sound/soc/codecs/wm8741.c +17 -46
@@ -125,18 +125,6 @@ static const struct snd_soc_dapm_route wm8741_dapm_routes[] = { { "VOUTRN", NULL, "DACR" }, }; -static struct { -int value; -int ratio; -} lrclk_ratios[WM8741_NUM_RATES ] = { - {1 ,128 }, - {2 ,192 }, - {3 ,256 }, - {4 ,384 }, - {5 ,512 }, - {6 ,768 }, -}; -static const unsigned int rates_11289[] = {44100 ,88200 , };
@@ -209,29 +197,6 @@ static const struct snd_pcm_hw_constraint_list constraints_36864 = { .list = rates_36864, }; - -static int wm8741_startup (struct snd_pcm_substream *substream, -struct snd_soc_dai *dai) -{ -struct snd_soc_codec *codec = dai->codec; -struct wm8741_priv *wm8741 =snd_soc_codec_get_drvdata (codec); - -/* The set of sample rates that can be supported depends on the -* MCLK supplied to the CODEC - enforce this. -*/ -if (!wm8741->sysclk) { -dev_err (codec->dev, -"No MCLK configured, call set_sysclk() on init\n" ); -return -EINVAL ; - } - -snd_pcm_hw_constraint_list (substream->runtime,0 , -SNDRV_PCM_HW_PARAM_RATE , - wm8741->sysclk_constraints); - -return 0 ; -} -static int wm8741_hw_params (struct snd_pcm_substream *substream,struct snd_pcm_hw_params *params,struct snd_soc_dai *dai)
@@ -241,17 +206,24 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,u16 iface =snd_soc_read (codec,WM8741_FORMAT_CONTROL ) &0x1FC ;int i; -/* Find a supported LRCLK ratio */ -for (i =0 ; i <ARRAY_SIZE (lrclk_ratios); i++) { -if (wm8741->sysclk /params_rate (params) == - lrclk_ratios[i].ratio) +/* The set of sample rates that can be supported depends on the +* MCLK supplied to the CODEC - enforce this. +*/ +if (!wm8741->sysclk) { +dev_err (codec->dev, +"No MCLK configured, call set_sysclk() on hw_params\n" ); +return -EINVAL ; + } + +/* Find a supported LRCLK rate */ +for (i =0 ; i < wm8741->sysclk_constraints->count; i++) { +if (wm8741->sysclk_constraints->list[i] ==params_rate (params))break ; } -/* Should never happen, should be handled by constraints */ -if (i ==ARRAY_SIZE (lrclk_ratios)) { -dev_err (codec->dev,"MCLK/fs ratio %d unsupported\n" , - wm8741->sysclk /params_rate (params)); +if (i == wm8741->sysclk_constraints->count) { +dev_err (codec->dev,"LRCLK %d unsupported with MCLK %d\n" , +params_rate (params), wm8741->sysclk);return -EINVAL ; }
@@ -274,8 +246,8 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,return -EINVAL ; } -dev_dbg (codec->dev,"wm8741_hw_params: bit size param = %d" , -params_width (params)); +dev_dbg (codec->dev,"wm8741_hw_params: bit size param = %d, rate param = %d" , +params_width (params),params_rate (params));snd_soc_write (codec,WM8741_FORMAT_CONTROL , iface);return 0 ;
@@ -403,7 +375,6 @@ static int wm8741_set_dai_fmt(struct snd_soc_dai *codec_dai, SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)static const struct snd_soc_dai_ops wm8741_dai_ops = { - .startup = wm8741_startup, .hw_params = wm8741_hw_params, .set_sysclk = wm8741_set_dai_sysclk, .set_fmt = wm8741_set_dai_fmt,
Signature · 1 line
1.9.1
Quoted 52 lines · Sergej Sawazki
The set of supported sample rates depends on the master clock supplied to the codec. Allow the machine driver to set the required master clock in
hw_params().Signed-off-by Sergej Sawazki <[email protected]>---
This patch has been tested on a board with two master clocks, 22.5792MHz (for 44.1kHz, 88.2kHz, ...) and 24.576MHz (for 48kHz, 96kHz, ...).
sound/soc/codecs/wm8741.c | 63 +++++++++++++---------------------------------- 1 file changed, 17 insertions(+), 46 deletions(-)sound/soc/codecs/wm8741.c +0
-24@@ -125,18 +125,6 @@ static const struct snd_soc_dapm_route wm8741_dapm_routes[] = { { "VOUTRN", NULL, "DACR" }, }; -static struct { -int value; -int ratio; -} lrclk_ratios[WM8741_NUM_RATES ] = { - {1 ,128 }, - {2 ,192 }, - {3 ,256 }, - {4 ,384 }, - {5 ,512 }, - {6 ,768 }, -}; -static const unsigned int rates_11289[] = {44100 ,88200 , };@@ -209,29 +197,6 @@ static const struct snd_pcm_hw_constraint_list constraints_36864 = { .list = rates_36864, }; - -static int wm8741_startup (struct snd_pcm_substream *substream, -struct snd_soc_dai *dai) -{ -struct snd_soc_codec *codec = dai->codec; -struct wm8741_priv *wm8741 =snd_soc_codec_get_drvdata (codec); - -/* The set of sample rates that can be supported depends on the -* MCLK supplied to the CODEC - enforce this. -*/ -if (!wm8741->sysclk) { - dev_err(codec->dev,
sound/soc/codecs/wm8741.c static const struct snd_pcm_hw_constraint_list constraints_36864 = { · line 233
Quoted 10 lines
sound/soc/codecs/wm8741.c +0
-10- "No MCLK configured, call set_sysclk() on init\n"); -return -EINVAL ; - } - -snd_pcm_hw_constraint_list (substream->runtime,0 , -SNDRV_PCM_HW_PARAM_RATE , - wm8741->sysclk_constraints); - -return 0 ; -}
I think rather than removing the constraints entirely here, perhaps just don't set any constraints if there is no SYSCLK yet. That way we get the benefits of the constraints for single clock systems (such as user-space being able to arrange appropriate software resampling) but those like yours can configure the clock later.
Quoted 10 lines
sound/soc/codecs/wm8741.c +0
-3-static int wm8741_hw_params (struct snd_pcm_substream *substream,struct snd_pcm_hw_params *params,struct snd_soc_dai *dai)@@ -241,17 +206,24 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,u16 iface =snd_soc_read (codec,WM8741_FORMAT_CONTROL ) &0x1FC ;int i; -/* Find a supported LRCLK ratio */ -for (i =0 ; i <ARRAY_SIZE (lrclk_ratios); i++) {
sound/soc/codecs/wm8741.c static int wm8741_hw_params(struct snd_pcm_substream *substream, · line 216
Quoted 10 lines
sound/soc/codecs/wm8741.c +8
-2-if (wm8741->sysclk /params_rate (params) == - lrclk_ratios[i].ratio) +/* The set of sample rates that can be supported depends on the +* MCLK supplied to the CODEC - enforce this. +*/ +if (!wm8741->sysclk) { +dev_err (codec->dev, +"No MCLK configured, call set_sysclk() on hw_params\n" ); +return -EINVAL ; + }
Then you can keep this error check here and fail if we reach hw_params and still don't have a SYSCLK. You will probably need to provide a way to clear the SYSCLK though set_dai_sysclk as well.
Thanks,
Charles
Quoted 39 lines
sound/soc/codecs/wm8741.c +9
-7+ +/* Find a supported LRCLK rate */ +for (i =0 ; i < wm8741->sysclk_constraints->count; i++) { +if (wm8741->sysclk_constraints->list[i] ==params_rate (params))break ; } -/* Should never happen, should be handled by constraints */ -if (i ==ARRAY_SIZE (lrclk_ratios)) { -dev_err (codec->dev,"MCLK/fs ratio %d unsupported\n" , - wm8741->sysclk /params_rate (params)); +if (i == wm8741->sysclk_constraints->count) { +dev_err (codec->dev,"LRCLK %d unsupported with MCLK %d\n" , +params_rate (params), wm8741->sysclk);return -EINVAL ; }@@ -274,8 +246,8 @@ static int wm8741_hw_params(struct snd_pcm_substream *substream,return -EINVAL ; } -dev_dbg (codec->dev,"wm8741_hw_params: bit size param = %d" , -params_width (params)); +dev_dbg (codec->dev,"wm8741_hw_params: bit size param = %d, rate param = %d" , +params_width (params),params_rate (params));snd_soc_write (codec,WM8741_FORMAT_CONTROL , iface);return 0 ;@@ -403,7 +375,6 @@ static int wm8741_set_dai_fmt(struct snd_soc_dai *codec_dai, SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)static const struct snd_soc_dai_ops wm8741_dai_ops = { - .startup = wm8741_startup, .hw_params = wm8741_hw_params, .set_sysclk = wm8741_set_dai_sysclk, .set_fmt = wm8741_set_dai_fmt,Signature · 1 line
1.9.1
Mark Brown
maintainerQuoted 3 lines · Charles Keepax
Quoted 2 lines · Sergej Sawazki
The set of supported sample rates depends on the master clock supplied to the codec. Allow the machine driver to set the required master clock
Please delete undeleted context when replying.
Quoted 6 lines
I think rather than removing the constraints entirely here, perhaps just don't set any constraints if there is no SYSCLK yet. That way we get the benefits of the constraints for single clock systems (such as user-space being able to arrange appropriate software resampling) but those like yours can configure the clock later.
Yes, that's the ideal thing. The machine driver should reset the clock back to zero when things go idle.
Quoted 8 lines · Charles Keepax
I think rather than removing the constraints entirely here, perhaps just don't set any constraints if there is no SYSCLK yet. That way we get the benefits of the constraints for single clock systems (such as user-space being able to arrange appropriate software resampling) but those like yours can configure the clock later.
Good point, I will add it to v2.
Quoted 10 lines
sound/soc/codecs/wm8741.c static int wm8741_hw_params(struct snd_pcm_substream *substream, · line 216
Quoted 5 lines
sound/soc/codecs/wm8741.c +5
-0+if (!wm8741->sysclk) { +dev_err (codec->dev, +"No MCLK configured, call set_sysclk() on hw_params\n" ); +return -EINVAL ; + }Then you can keep this error check here and fail if we reach
hw_paramsand still don't have a SYSCLK. You will probably need to provide a way to clear the SYSCLK thoughset_dai_sysclkas well.
Is snd_soc_dai_set_sysclk( , , 0, ) the right way to clear the SYSCLK?
Thanks,
Sergej
Mark Brown
maintainerQuoted 8 lines · Sergej Sawazki
Quoted 4 lines · Charles Keepax
Then you can keep this error check here and fail if we reach
hw_paramsand still don't have a SYSCLK. You will probably need to provide a way to clear the SYSCLK thoughset_dai_sysclkas well.Is
snd_soc_dai_set_sysclk( , , 0, )the right way to clear the SYSCLK?
Yes.