ath3k: add support of 13d3:3474 AR3012 device
Subsystems (2)
PATCH 1/1 ath3k: add support of 13d3:3474 AR3012 device
This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to/lib/firmware/ar3k/ that are not included in linux-firmware yet.
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3474 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
--- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -111,6 +111,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3408) }, { USB_DEVICE(0x13d3, 0x3423) }, { USB_DEVICE(0x13d3, 0x3432) }, + { USB_DEVICE(0x13d3, 0x3474) },/* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) },
@@ -166,6 +167,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -210,6 +210,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
Signature · 1 line
1.9.1
Marcel Holtmann
maintainerHi Dmitry,
Quoted 13 lines
This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/that are not included in linux-firmware yet.T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3474 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Quoted 6 lines
Signed-off-by Dmitry Tunin <[email protected]>---
drivers/bluetooth/ath3k.c| 2 ++drivers/bluetooth/btusb.c| 1 +2 files changed, 3 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel