Patch "ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage" has been added to the 4.0-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-am335x-boneblack-disable-rtc-only-sleep-to-avoid-hardware-damage.patch
and it can be found in the queue-4.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302Mon Sep 17 00:00:00 2001
From: Matthijs van Duin <[email protected]>
Date: Mon, 1 Jun 2015 21:33:28 +0200
Subject: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
From: Matthijs van Duin <[email protected]>
commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream.
Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage.
The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller.
--- arch/arm/boot/dts/am335x-bone-common.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/arm/boot/dts/am335x-bone-common.dtsi +19 -0
@@ -223,6 +223,25 @@ /include/ "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr";
Patches currently in stable-queue which might be from [email protected] are
queue-4.0/arm-dts-am335x-boneblack-disable-rtc-only-sleep-to-avoid-hardware-damage.patch --
To unsubscribe from this list: send the line "unsubscribe stable" in