Skip to contentSkip to conversation

Patch "ath3k: add support of 13d3:3474 AR3012 device" has been added to the 4.0-stable tree

PATCH [email protected] 1 participant 1 message Jun 26, 2015

Subsystems (2)
Stable branch Bluetooth drivers
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    ath3k: add support of 13d3:3474 AR3012 device

to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     ath3k-add-support-of-13d3-3474-ar3012-device.patch

and it can be found in the queue-4.0 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 Mon Sep 17 00:00:00 2001

From: Dmitry Tunin <[email protected]>
Date: Sat, 6 Jun 2015 20:29:25 +0300
Subject: ath3k: add support of 13d3:3474 AR3012 device

From: Dmitry Tunin <[email protected]>

commit 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 upstream.

BugLink https://bugs.launchpad.net/bugs/1427680

This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.

T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3474 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by Dmitry Tunin <[email protected]>
Signed-off-by Marcel Holtmann <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/bluetooth/ath3k.c |    2 ++
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -112,6 +112,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },

@@ -168,6 +169,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -206,6 +206,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

Patches currently in stable-queue which might be from [email protected] are

queue-4.0/ath3k-add-support-of-13d3-3474-ar3012-device.patch queue-4.0/ath3k-add-support-of-0489-e076-ar3012-device.patch