Patch "Bluetooth: ath3k: Add support of 04ca:300d AR3012 device" has been added to the 4.1-stable tree

This is a note to let you know that I've just added the patch titled

Bluetooth: ath3k: Add support of 04ca:300d AR3012 device

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     bluetooth-ath3k-add-support-of-04ca-300d-ar3012-device.patch

and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Dmitry Tunin <[email protected]>
Date: Thu, 18 Jun 2015 20:41:51 +0300
Subject: Bluetooth: ath3k: Add support of 04ca:300d AR3012 device

From: Dmitry Tunin <[email protected]>

commit 7e730c7f3d1f39c25cf5f7cf70c0ff4c28d7bec7 upstream.

This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.

T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=300d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

---
 drivers/bluetooth/ath3k.c |    2 ++
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 3 insertions(+)

@@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x04CA, 0x3007) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x04CA, 0x300b) },
+	{ USB_DEVICE(0x04CA, 0x300d) },
 	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
 	{ USB_DEVICE(0x0930, 0x0219) },

@@ -145,6 +146,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },

@@ -186,6 +186,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/ath3k-add-support-of-13d3-3474-ar3012-device.patch queue-4.1/bluetooth-ath3k-add-support-of-04ca-300d-ar3012-device.patch queue-4.1/ath3k-add-support-of-0489-e076-ar3012-device.patch