hwmon: (nct7802) fix visibility of temp3
PATCH 1/1 hwmon: (nct7802) fix visibility of temp3
From: const <[email protected]>
Excerpt from datasheet:
7.2.32 Mode Selection RegisterRTD3_MD : 00=Closed , 01=Reserved , 10=Thermistor mode , 11=Voltage sense
Show temp3 only in Thermistor mode
Signed-off-by Constantine Shulyupin <[email protected]>
--- drivers/hwmon/nct7802.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/nct7802.c +1 -1
@@ -649,7 +649,7 @@ static umode_t nct7802_temp_is_visible(struct kobject *kobj,if (index >=9 && index <18 && (reg &0x0c ) !=0x04 && (reg &0x0c ) !=0x08 )/* RD2 */ return 0 ; -if (index >=18 && index <27 && (reg &0x30 ) !=0x10 )/* RD3 */ +if (index >=18 && index <27 && (reg &0x30 ) !=0x20 )/* RD3 */ return 0 ;if (index >=27 && index <35 )/* local */ return attr->mode;
Signature · 7 lines
1.9.1 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 9 lines · Constantine Shulyupin
From: const <[email protected]>
Excerpt from datasheet:
7.2.32 Mode Selection RegisterRTD3_MD: 00=Closed , 01=Reserved , 10=Thermistor mode , 11=Voltage senseShow temp3 only in Thermistor mode
Signed-off-by Constantine Shulyupin <[email protected]>
Thanks, applied. I'll also submit the patch to -stable releases as needed.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors