Skip to contentSkip to conversation

Improve Python 3 support in policycoreutils

PATCH In review Michal Srb 2 participants 8 messages Jul 21, 2015 – Jul 22, 2015 SELinux security module

lore
Share & tools
lore

Michal Srb

author
#0 lore raw

Hello,

These patches try to add Python 3 support to the following places under policycoreutils/:

audit2allow/
sandbox/
scripts/
semanage/ (except seobject.py)

Patch for the seobject.py should follow later.

Thanks
Michal

author
#1 lore raw

PATCH 1/4 policycoreutils/audit2allow: improve compatibility with Python 3

- replace print statement with print function
- use reserved word as in try-except
- replace deprecated assert_() method with assertTrue() in unit tests

---
 policycoreutils/audit2allow/audit2allow         | 66 ++++++++++++-------------
 policycoreutils/audit2allow/audit2why           | 64 ++++++++++++------------
 policycoreutils/audit2allow/sepolgen-ifgen      | 12 ++---
 policycoreutils/audit2allow/test_audit2allow.py |  8 +--
 4 files changed, 75 insertions(+), 75 deletions(-)
policycoreutils/audit2allow/audit2allow +33 -33
index c9713a2..0688b63 100644
@@ -135,13 +135,13 @@ class AuditToPolicy:
         elif self.__options.audit:
             try:
                 messages = audit.get_audit_msgs()
-            except OSError, e:
+            except OSError as e:
                 sys.stderr.write('could not run ausearch - "%s"\n' % str(e))
                 sys.exit(1)
         elif self.__options.boot:
             try:
                 messages = audit.get_audit_boot_msgs()
-            except OSError, e:
+            except OSError as e:
                 sys.stderr.write('could not run ausearch - "%s"\n' % str(e))
                 sys.exit(1)
         else:
@@ -152,7 +152,7 @@ class AuditToPolicy:
         if filename is not None:
             try:
                 f = open(filename)
-            except IOError, e:
+            except IOError as e:
                 sys.stderr.write('could not open file %s - "%s"\n' % (filename, str(e)))
                 sys.exit(1)
 
@@ -214,7 +214,7 @@ class AuditToPolicy:
 
         try:
             fd = open(filename, "w")
-        except IOError, e:
+        except IOError as e:
             sys.stderr.write("could not write output file: %s\n" % str(e))
             sys.exit(1)
 
@@ -225,8 +225,8 @@ class AuditToPolicy:
 
         try:
             mc.create_module_package(filename, self.__options.refpolicy)
-        except RuntimeError, e:
-            print e
+        except RuntimeError as e:
+            print(e)
             sys.exit(1)
 
         sys.stdout.write(_("******************** IMPORTANT ***********************\n"))
@@ -240,44 +240,44 @@ class AuditToPolicy:
                 rc = i.type
                 data = i.data
                 if rc >= 0:
-                    print "%s\n\tWas caused by:" % i.message
+                    print("%s\n\tWas caused by:" % i.message)
                 if rc == audit2why.ALLOW:
-                    print "\t\tUnknown - would be allowed by active policy\n",
-                    print "\t\tPossible mismatch between this policy and the one under which the audit message was generated.\n"
-                    print "\t\tPossible mismatch between current in-memory boolean settings vs. permanent ones.\n"
+                    print("\t\tUnknown - would be allowed by active policy")
+                    print("\t\tPossible mismatch between this policy and the one under which the audit message was generated.\n")
+                    print("\t\tPossible mismatch between current in-memory boolean settings vs. permanent ones.\n")
                     continue
                 if rc == audit2why.DONTAUDIT:
-                    print "\t\tUnknown - should be dontaudit'd by active policy\n",
-                    print "\t\tPossible mismatch between this policy and the one under which the audit message was generated.\n"
-                    print "\t\tPossible mismatch between current in-memory boolean settings vs. permanent ones.\n"
+                    print("\t\tUnknown - should be dontaudit'd by active policy")
+                    print("\t\tPossible mismatch between this policy and the one under which the audit message was generated.\n")
+                    print("\t\tPossible mismatch between current in-memory boolean settings vs. permanent ones.\n")
                     continue
                 if rc == audit2why.BOOLEAN:
                     if len(data) > 1:
-                        print "\tOne of the following booleans was set incorrectly."
+                        print("\tOne of the following booleans was set incorrectly.")
                         for b in data:
-                            print "\tDescription:\n\t%s\n"  % seobject.boolean_desc(b[0])
-                            print "\tAllow access by executing:\n\t# setsebool -P %s %d"  % (b[0], b[1])
+                            print("\tDescription:\n\t%s\n"  % seobject.boolean_desc(b[0]))
+                            print("\tAllow access by executing:\n\t# setsebool -P %s %d"  % (b[0], b[1]))
                     else:
-                        print "\tThe boolean %s was set incorrectly. " % (data[0][0])
-                        print "\tDescription:\n\t%s\n"  % seobject.boolean_desc(data[0][0])
-                        print "\tAllow access by executing:\n\t# setsebool -P %s %d"  % (data[0][0], data[0][1])
+                        print("\tThe boolean %s was set incorrectly. " % (data[0][0]))
+                        print("\tDescription:\n\t%s\n"  % seobject.boolean_desc(data[0][0]))
+                        print("\tAllow access by executing:\n\t# setsebool -P %s %d"  % (data[0][0], data[0][1]))
                     continue
 
                 if rc == audit2why.TERULE:
-                    print "\t\tMissing type enforcement (TE) allow rule.\n"
-                    print "\t\tYou can use audit2allow to generate a loadable module to allow this access.\n"
+                    print("\t\tMissing type enforcement (TE) allow rule.\n")
+                    print("\t\tYou can use audit2allow to generate a loadable module to allow this access.\n")
                     continue
 
                 if rc == audit2why.CONSTRAINT:
-                    print #!!!! This avc is a constraint violation.  You would need to modify the attributes of either the source or target types to allow this access.\n"
-                    print "#Constraint rule:"
-                    print "\n\t" + data[0]
+                    print() #!!!! This avc is a constraint violation.  You would need to modify the attributes of either the source or target types to allow this access.\n"
+                    print("#Constraint rule:")
+                    print("\n\t" + data[0])
                     for reason in data[1:]:
-                        print "#\tPossible cause is the source %s and target %s are different.\n" % reason
+                        print("#\tPossible cause is the source %s and target %s are different.\n" % reason)
 
                 if rc == audit2why.RBAC:
-                    print "\t\tMissing role allow rule.\n"
-                    print "\t\tAdd an allow rule for the role pair.\n"
+                    print("\t\tMissing role allow rule.\n")
+                    print("\t\tAdd an allow rule for the role pair.\n")
                     continue
 
             audit2why.finish()
@@ -288,8 +288,8 @@ class AuditToPolicy:
         if self.__options.audit2why:
             try:
                 return self.__output_audit2why()
-            except RuntimeError, e:
-                print e
+            except RuntimeError as e:
+                print(e)
                 sys.exit(1)
 
         g = policygen.PolicyGenerator()
@@ -348,11 +348,11 @@ class AuditToPolicy:
             self.__output()
         except KeyboardInterrupt:
             sys.exit(0)
-        except ValueError, e:
-            print e
+        except ValueError as e:
+            print(e)
             sys.exit(1)
-        except IOError, e:
-            print e
+        except IOError as e:
+            print(e)
             sys.exit(1)
 
 if __name__ == "__main__":
policycoreutils/audit2allow/audit2why +32 -32

129 lines not on this page · raw message

policycoreutils/audit2allow/sepolgen-ifgen +6 -6
index 83c7ecf..7f8caaf 100644
@@ -82,7 +82,7 @@ def get_attrs(policy_path):
             sys.stderr.write("No installed policy to check\n")
             return None
         outfile = tempfile.NamedTemporaryFile()
-    except IOError, e:
+    except IOError as e:
         sys.stderr.write("could not open attribute output file\n")
         return None
     except OSError:
@@ -100,7 +100,7 @@ def get_attrs(policy_path):
     try:
         attrs.from_file(outfile)
     except:
-        print "error parsing attribute info"
+        print("error parsing attribute info")
         return None
 
     return attrs
@@ -111,7 +111,7 @@ def main():
     # Open the output first to generate errors before parsing
     try:
         f = open(options.output, "w")
-    except IOError, e:
+    except IOError as e:
         sys.stderr.write("could not open output file [%s]\n" % options.output)
         return 1
 
@@ -130,9 +130,9 @@ def main():
     # Parse the headers
     try:
         headers = refparser.parse_headers(options.headers, output=log, debug=options.debug)
-    except ValueError, e:
-        print "error parsing headers"
-        print str(e)
+    except ValueError as e:
+        print("error parsing headers")
+        print(str(e))
         return 1
 
     if_set = interfaces.InterfaceSet(output=log)
policycoreutils/audit2allow/test_audit2allow.py +4 -4
index 794673e..d6bd60b 100644
@@ -4,18 +4,18 @@ from subprocess import Popen, PIPE
 
 class Audit2allowTests(unittest.TestCase):
     def assertDenied(self, err):
-        self.assert_('Permission denied' in err,
+        self.assertTrue('Permission denied' in err,
                      '"Permission denied" not found in %r' % err)
     def assertNotFound(self, err):
-        self.assert_('not found' in err,
+        self.assertTrue('not found' in err,
                      '"not found" not found in %r' % err)
 
     def assertFailure(self, status):
-        self.assert_(status != 0,
+        self.assertTrue(status != 0,
                      '"Succeeded when it should have failed')
 
     def assertSuccess(self, cmd, status, err):
-        self.assert_(status == 0,
+        self.assertTrue(status == 0,
                      '"%s should have succeeded for this test %r' %  (cmd, err))
 
     def test_sepolgen_ifgen(self):
Signature · 1 line
2.4.3
author
#2 lore raw

PATCH 2/4 policycoreutils/sandbox: improve compatibility with Python 3

In reply to Michal Srb

- gettext.install() only takes optional "unicode" keyword argument in Python 2, and its default value is "False". This keyword argument doesn't exist in Python 3
- __builtin__ module has been renamed to "builtins" in Python 3
- raw_input() has been renamed to input() in Python 3
- specify octal literals in form compatible with both Python 2 and 3
- migrate from commands to subprocess
- replace print statement with print function
- use reserved word as in try-except
- replace deprecated assert_() method with assertTrue() in unit tests

---
 policycoreutils/sandbox/sandbox         | 38 +++++++++++++++++++--------------
 policycoreutils/sandbox/start           |  6 +++---
 policycoreutils/sandbox/test_sandbox.py | 12 +++++------
 3 files changed, 31 insertions(+), 25 deletions(-)
policycoreutils/sandbox/sandbox +22 -16
index 3678c5d..fb64464 100644
@@ -25,7 +25,6 @@ import selinux
 import signal
 from tempfile import mkdtemp
 import pwd
-import commands
 import sepolicy
 
 PROGNAME = "policycoreutils"
@@ -36,13 +35,16 @@ gettext.bindtextdomain(PROGNAME, "/usr/share/locale")
 gettext.textdomain(PROGNAME)
 
 try:
-       gettext.install(PROGNAME,
-                       localedir = "/usr/share/locale",
-                       unicode=False,
-                       codeset = 'utf-8')
+   gettext.install(PROGNAME,
+                   localedir = "/usr/share/locale",
+                   codeset = 'utf-8')
 except IOError:
-       import __builtin__
-       __builtin__.__dict__['_'] = unicode
+    try:
+        import builtins
+        builtins.__dict__['_'] = str
+    except ImportError:
+        import __builtin__
+        __builtin__.__dict__['_'] = unicode
 
 DEFAULT_WINDOWSIZE = "1000x700"
 DEFAULT_TYPE = "sandbox_t"
@@ -86,7 +88,7 @@ def copyfile(file, srcdir, dest):
                      else:
                             shutil.copy2(file, dest)
 
-              except shutil.Error, elist:
+              except shutil.Error as elist:
                      for e in elist.message:
                             sys.stderr.write(e[2])
                      
@@ -107,7 +109,11 @@ def savefile(new, orig, X_ind):
               if rc == gtk.RESPONSE_YES:
                      copy = True
        else:
-              ans = raw_input(_("Do you want to save changes to '%s' (y/N): ") % orig)
+              try:
+                  input = raw_input
+              except NameError:
+                  pass
+              ans = input(_("Do you want to save changes to '%s' (y/N): ") % orig)
               if(re.match(_("[yY]"),ans)):
                      copy = True
        if(copy):
@@ -228,9 +234,9 @@ class Sandbox:
            for i in fd.readlines():
                   try:
                          self.__include(option, opt, i[:-1], parser)
-                  except IOError, e:
+                  except IOError as e:
                          sys.stderr.write(str(e))
-                  except TypeError, e:
+                  except TypeError as e:
                          sys.stderr.write(str(e))
            fd.close()
 
@@ -263,7 +269,7 @@ dbus-launch --exit-with-session %s
 kill -TERM $WM_PID  2> /dev/null
 """ % (command, wm, command))
            fd.close()
-           os.chmod(execfile, 0700)
+           os.chmod(execfile, 0o700)
 
     def usage(self, message = ""):
            error_exit("%s\n%s" % (self.__parser.usage, message))
@@ -492,13 +498,13 @@ if __name__ == '__main__':
     try:
            sandbox = Sandbox()
            rc = sandbox.main()
-    except OSError, error:
+    except OSError as error:
            error_exit(error)
-    except ValueError, error:
+    except ValueError as error:
            error_exit(error.args[0])
-    except KeyError, error:
+    except KeyError as error:
            error_exit(_("Invalid value %s") % error.args[0])
-    except IOError, error:
+    except IOError as error:
            error_exit(error)
     except KeyboardInterrupt:
            rc = 0
policycoreutils/sandbox/start +3 -3
index 52950d7..d895ba2 100644
@@ -1,9 +1,9 @@
 #! /usr/bin/python -Es
-import gtk, commands, sys
+import gtk, subprocess, sys
 rc = [-1,'']
 try:
-    rc=commands.getstatusoutput(sys.argv[1])
+    rc=subprocess.getstatusoutput(sys.argv[1])
 except:
     pass
 if rc[0] == 0:
-    print rc[1]
+    print(rc[1])
policycoreutils/sandbox/test_sandbox.py +6 -6
index b3b7f64..d765cb4 100644
@@ -4,18 +4,18 @@ from subprocess import Popen, PIPE
 
 class SandboxTests(unittest.TestCase):
     def assertDenied(self, err):
-        self.assert_('Permission denied' in err,
+        self.assertTrue(b'Permission denied' in err,
                      '"Permission denied" not found in %r' % err)
     def assertNotFound(self, err):
-        self.assert_('not found' in err,
+        self.assertTrue(b'not found' in err,
                      '"not found" not found in %r' % err)
 
     def assertFailure(self, status):
-        self.assert_(status != 0,
+        self.assertTrue(status != 0,
                      '"Succeeded when it should have failed')
 
     def assertSuccess(self, status, err):
-        self.assert_(status == 0,
+        self.assertTrue(status == 0,
                      '"Sandbox should have succeeded for this test %r' %  err)
 
     def test_simple_success(self):
@@ -23,7 +23,7 @@ class SandboxTests(unittest.TestCase):
         p1 = Popen(['cat', '/etc/passwd'], stdout = PIPE)
         p2 = Popen(['sandbox', 'grep', 'root'], stdin = p1.stdout, stdout=PIPE)
         out, err = p2.communicate()
-        self.assert_('root' in out)
+        self.assertTrue(b'root' in out)
 
     def test_cant_kill(self):
         "Verify that we cannot send kill signal in the sandbox"
@@ -95,4 +95,4 @@ if __name__ == "__main__":
     if selinux.security_getenforce() == 1:
         unittest.main()
     else:
-        print "SELinux must be in enforcing mode for this test"
+        print("SELinux must be in enforcing mode for this test")
Signature · 1 line
2.4.3
author
#3 lore raw

PATCH 3/4 policycoreutils/semanage: improve compatibility with Python 3

In reply to Michal Srb

- gettext.install() only takes "unicode" keyword argument in Python 2
- __builtin__ module has been renamed to "builtins" in Python 3
- use reserved word as in try-except
- replace print statement with print function

---
 policycoreutils/semanage/semanage         | 59 +++++++++++++++++--------------
 policycoreutils/semanage/test-semanage.py |  4 +--
 2 files changed, 35 insertions(+), 28 deletions(-)
policycoreutils/semanage/semanage +33 -26
index dd1010a..515cef3 100644
@@ -29,13 +29,20 @@ import sys
 import gettext
 PROGNAME="policycoreutils"
 try:
-       gettext.install(PROGNAME,
-                       localedir="/usr/share/locale",
-                       unicode=True,
-                       codeset = 'utf-8')
+    kwargs = {}
+    if sys.version_info < (3,):
+        kwargs['unicode'] = True
+    gettext.install(PROGNAME,
+                    localedir="/usr/share/locale",
+                    codeset = 'utf-8',
+                    **kwarg)
 except IOError:
-       import __builtin__
-       __builtin__.__dict__['_'] = unicode
+    try:
+        import builtins
+        builtins.__dict__['_'] = str
+    except ImportError:
+        import __builtin__
+        __builtin__.__dict__['_'] = unicode
 
 # define custom usages for selected main actions
 usage_login = "semanage login [-h] [-n] [-N] [-s STORE] ["
@@ -103,7 +110,7 @@ class SetImportFile(argparse.Action):
         if values and values is not "-":
                try:
                       sys.stdin = open(values, 'r')
-               except IOError,e:
+               except IOError as e:
                       sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
                       sys.exit(1)
         setattr(namespace, self.dest, values)
@@ -207,7 +214,7 @@ def handleLogin(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "login %s" % (str(i))
+            print("login %s" % (str(i)))
 
 def parser_add_store(parser, name):
     parser.add_argument('-S', '--store', action=SetStore, help=_("Select an alternate SELinux Policy Store to manage"))
@@ -323,7 +330,7 @@ def handleFcontext(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "fcontext %s" % str(i)
+            print("fcontext %s" % str(i))
 
 def setupFcontextParser(subparsers):
     ftype_help = '''
@@ -381,7 +388,7 @@ def handleUser(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "user %s" % str(i)
+            print("user %s" % str(i))
 
 def setupUserParser(subparsers):
     generated_usage = generate_custom_usage(usage_user, usage_user_dict)
@@ -430,7 +437,7 @@ def handlePort(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "port %s" % str(i)
+            print("port %s" % str(i))
 
 def setupPortParser(subparsers):
     generated_usage = generate_custom_usage(usage_port, usage_port_dict)
@@ -473,7 +480,7 @@ def handleInterface(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "interface %s" % str(i)
+            print("interface %s" % str(i))
 
 def setupInterfaceParser(subparsers):
     generated_usage = generate_custom_usage(usage_interface, usage_interface_dict)
@@ -512,7 +519,7 @@ def handleModule(args):
         OBJECT.list(args.noheading, args.locallist)
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "module %s" % str(i)
+            print("module %s" % str(i))
 
 def setupModuleParser(subparsers):
     moduleParser = subparsers.add_parser('module', help=_('Manage SELinux policy modules'))
@@ -552,7 +559,7 @@ def handleNode(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "node %s" % str(i)
+            print("node %s" % str(i))
 
 def setupNodeParser(subparsers):
     generated_usage = generate_custom_usage(usage_node, usage_node_dict)
@@ -584,10 +591,10 @@ def handleBoolean(args):
         sys.exit(2)
     # TODO: should be added to handle_opts logic
     elif args.action is "modify" and not args.boolean:
-        print "boolean name required "
+        print("boolean name required ")
         sys.exit(1)
     elif args.action is "modify" and args.boolean and not args.state:
-        print "state option is needed"
+        print("state option is needed")
         sys.exit(1)
     else:
         handle_opts(args,boolean_args,args.action)
@@ -604,7 +611,7 @@ def handleBoolean(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "boolean %s" % str(i)
+            print("boolean %s" % str(i))
 
 def setupBooleanParser(subparsers):
     generated_usage = generate_custom_usage(usage_boolean, usage_boolean_dict)
@@ -670,11 +677,11 @@ def setupDontauditParser(subparsers):
 def handleExport(args):
     manageditems=[ "boolean", "login", "interface", "user", "port", "node", "fcontext", "module"]
     for i in manageditems:
-        print "%s -D" % i
+        print("%s -D" % i)
     for i in manageditems:
         OBJECT = object_dict[i]()
         for c in OBJECT.customized():
-            print "%s %s" % (i, str(c))
+            print("%s %s" % (i, str(c)))
 
     sys.exit(0)
 
@@ -743,10 +750,10 @@ def handleImport(args):
             commandParser = createCommandParser()
             args = commandParser.parse_args(mkargv(l))
             args.func(args)
-        except ValueError,e:
+        except ValueError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
-        except IOError,e:
+        except IOError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
         except KeyboardInterrupt:
@@ -822,21 +829,21 @@ def do_parser():
         args = commandParser.parse_args(make_args(sys.argv))
         args.func(args)
         sys.exit(0)
-    except IOError,e:
+    except IOError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
         sys.exit(1)
     except KeyboardInterrupt:
         sys.exit(0)
-    except ValueError, e:
+    except ValueError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
-    except KeyError, e:
+    except KeyError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
-    except OSError, e:
+    except OSError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[1]))
         sys.exit(1)
-    except RuntimeError, e:
+    except RuntimeError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
 
policycoreutils/semanage/test-semanage.py +2 -2
index d39013e..fc8368e 100644
@@ -273,10 +273,10 @@ if __name__ == "__main__":
             args = parser.parse_args()
             args.func(args)
             sys.exit(0)
-        except ValueError,e:
+        except ValueError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
-        except IOError,e:
+        except IOError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
         except KeyboardInterrupt:
Signature · 1 line
2.4.3
#4 lore raw

Re: [PATCH 3/4] policycoreutils/semanage: improve compatibility with Python 3

Quoted 20 lines · Michal Srb

- gettext.install() only takes "unicode" keyword argument in Python 2
- __builtin__ module has been renamed to "builtins" in Python 3
- use reserved word as in try-except
- replace print statement with print function

---
 policycoreutils/semanage/semanage         | 59 +++++++++++++++++--------------
 policycoreutils/semanage/test-semanage.py |  4 +--
 2 files changed, 35 insertions(+), 28 deletions(-)
policycoreutils/semanage/semanage +0 -1
index dd1010a..515cef3 100644
@@ -29,13 +29,20 @@ import sys
 import gettext
 PROGNAME="policycoreutils"
 try:
-       gettext.install(PROGNAME,

policycoreutils/semanage/semanage import sys · line 38

Quoted 10 lines
policycoreutils/semanage/semanage +7 -3
-                       localedir="/usr/share/locale",
-                       unicode=True,
-                       codeset = 'utf-8')
+    kwargs = {}
+    if sys.version_info < (3,):
+        kwargs['unicode'] = True
+    gettext.install(PROGNAME,
+                    localedir="/usr/share/locale",
+                    codeset = 'utf-8',
+                    **kwarg)

I had to fix this (kwarg -> kwargs). Not tested?

Quoted 178 lines
policycoreutils/semanage/semanage +26 -22
 except IOError:
-       import __builtin__
-       __builtin__.__dict__['_'] = unicode
+    try:
+        import builtins
+        builtins.__dict__['_'] = str
+    except ImportError:
+        import __builtin__
+        __builtin__.__dict__['_'] = unicode
 
 # define custom usages for selected main actions
 usage_login = "semanage login [-h] [-n] [-N] [-s STORE] ["
@@ -103,7 +110,7 @@ class SetImportFile(argparse.Action):
         if values and values is not "-":
                try:
                       sys.stdin = open(values, 'r')
-               except IOError,e:
+               except IOError as e:
                       sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
                       sys.exit(1)
         setattr(namespace, self.dest, values)
@@ -207,7 +214,7 @@ def handleLogin(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "login %s" % (str(i))
+            print("login %s" % (str(i)))
 
 def parser_add_store(parser, name):
     parser.add_argument('-S', '--store', action=SetStore, help=_("Select an alternate SELinux Policy Store to manage"))
@@ -323,7 +330,7 @@ def handleFcontext(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "fcontext %s" % str(i)
+            print("fcontext %s" % str(i))
 
 def setupFcontextParser(subparsers):
     ftype_help = '''
@@ -381,7 +388,7 @@ def handleUser(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "user %s" % str(i)
+            print("user %s" % str(i))
 
 def setupUserParser(subparsers):
     generated_usage = generate_custom_usage(usage_user, usage_user_dict)
@@ -430,7 +437,7 @@ def handlePort(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "port %s" % str(i)
+            print("port %s" % str(i))
 
 def setupPortParser(subparsers):
     generated_usage = generate_custom_usage(usage_port, usage_port_dict)
@@ -473,7 +480,7 @@ def handleInterface(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "interface %s" % str(i)
+            print("interface %s" % str(i))
 
 def setupInterfaceParser(subparsers):
     generated_usage = generate_custom_usage(usage_interface, usage_interface_dict)
@@ -512,7 +519,7 @@ def handleModule(args):
         OBJECT.list(args.noheading, args.locallist)
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "module %s" % str(i)
+            print("module %s" % str(i))
 
 def setupModuleParser(subparsers):
     moduleParser = subparsers.add_parser('module', help=_('Manage SELinux policy modules'))
@@ -552,7 +559,7 @@ def handleNode(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "node %s" % str(i)
+            print("node %s" % str(i))
 
 def setupNodeParser(subparsers):
     generated_usage = generate_custom_usage(usage_node, usage_node_dict)
@@ -584,10 +591,10 @@ def handleBoolean(args):
         sys.exit(2)
     # TODO: should be added to handle_opts logic
     elif args.action is "modify" and not args.boolean:
-        print "boolean name required "
+        print("boolean name required ")
         sys.exit(1)
     elif args.action is "modify" and args.boolean and not args.state:
-        print "state option is needed"
+        print("state option is needed")
         sys.exit(1)
     else:
         handle_opts(args,boolean_args,args.action)
@@ -604,7 +611,7 @@ def handleBoolean(args):
         OBJECT.deleteall()
     if args.action is "extract":
         for i in OBJECT.customized():
-            print "boolean %s" % str(i)
+            print("boolean %s" % str(i))
 
 def setupBooleanParser(subparsers):
     generated_usage = generate_custom_usage(usage_boolean, usage_boolean_dict)
@@ -670,11 +677,11 @@ def setupDontauditParser(subparsers):
 def handleExport(args):
     manageditems=[ "boolean", "login", "interface", "user", "port", "node", "fcontext", "module"]
     for i in manageditems:
-        print "%s -D" % i
+        print("%s -D" % i)
     for i in manageditems:
         OBJECT = object_dict[i]()
         for c in OBJECT.customized():
-            print "%s %s" % (i, str(c))
+            print("%s %s" % (i, str(c)))
 
     sys.exit(0)
 
@@ -743,10 +750,10 @@ def handleImport(args):
             commandParser = createCommandParser()
             args = commandParser.parse_args(mkargv(l))
             args.func(args)
-        except ValueError,e:
+        except ValueError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
-        except IOError,e:
+        except IOError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
         except KeyboardInterrupt:
@@ -822,21 +829,21 @@ def do_parser():
         args = commandParser.parse_args(make_args(sys.argv))
         args.func(args)
         sys.exit(0)
-    except IOError,e:
+    except IOError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
         sys.exit(1)
     except KeyboardInterrupt:
         sys.exit(0)
-    except ValueError, e:
+    except ValueError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
-    except KeyError, e:
+    except KeyError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
-    except OSError, e:
+    except OSError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[1]))
         sys.exit(1)
-    except RuntimeError, e:
+    except RuntimeError as e:
         sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
         sys.exit(1)
 
policycoreutils/semanage/test-semanage.py +2 -2
index d39013e..fc8368e 100644
@@ -273,10 +273,10 @@ if __name__ == "__main__":
             args = parser.parse_args()
             args.func(args)
             sys.exit(0)
-        except ValueError,e:
+        except ValueError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
-        except IOError,e:
+        except IOError as e:
             sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
             sys.exit(1)
         except KeyboardInterrupt:
author
#5 lore raw

Re: [PATCH 3/4] policycoreutils/semanage: improve compatibility with Python 3

Quoted 24 lines · Stephen Smalley
Quoted 23 lines · Michal Srb

- gettext.install() only takes "unicode" keyword argument in Python 2
- __builtin__ module has been renamed to "builtins" in Python 3
- use reserved word as in try-except
- replace print statement with print function

---
  policycoreutils/semanage/semanage         | 59 +++++++++++++++++--------------
  policycoreutils/semanage/test-semanage.py |  4 +--
  2 files changed, 35 insertions(+), 28 deletions(-)
policycoreutils/semanage/semanage +0 -4
index dd1010a..515cef3 100644
@@ -29,13 +29,20 @@ import sys
  import gettext
  PROGNAME="policycoreutils"
  try:
-       gettext.install(PROGNAME,
-                       localedir="/usr/share/locale",
-                       unicode=True,
-                       codeset = 'utf-8')
Quoted 8 lines

policycoreutils/semanage/semanage import sys · line 38

Quoted 7 lines
policycoreutils/semanage/semanage +7 -0
+    kwargs = {}
+    if sys.version_info < (3,):
+        kwargs['unicode'] = True
+    gettext.install(PROGNAME,
+                    localedir="/usr/share/locale",
+                    codeset = 'utf-8',
+                    **kwarg)

I had to fix this (kwarg -> kwargs). Not tested?

Oops, sorry about that. I remember doing minor changes in this part just before sending the patches - and I probably forgot to run tests on it after editing :/

Michal

Quoted 179 lines
Quoted 179 lines
policycoreutils/semanage/semanage +26 -22
  except IOError:
-       import __builtin__
-       __builtin__.__dict__['_'] = unicode
+    try:
+        import builtins
+        builtins.__dict__['_'] = str
+    except ImportError:
+        import __builtin__
+        __builtin__.__dict__['_'] = unicode
 
  # define custom usages for selected main actions
  usage_login = "semanage login [-h] [-n] [-N] [-s STORE] ["
@@ -103,7 +110,7 @@ class SetImportFile(argparse.Action):
          if values and values is not "-":
                 try:
                        sys.stdin = open(values, 'r')
-               except IOError,e:
+               except IOError as e:
                        sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
                        sys.exit(1)
          setattr(namespace, self.dest, values)
@@ -207,7 +214,7 @@ def handleLogin(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "login %s" % (str(i))
+            print("login %s" % (str(i)))
 
  def parser_add_store(parser, name):
      parser.add_argument('-S', '--store', action=SetStore, help=_("Select an alternate SELinux Policy Store to manage"))
@@ -323,7 +330,7 @@ def handleFcontext(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "fcontext %s" % str(i)
+            print("fcontext %s" % str(i))
 
  def setupFcontextParser(subparsers):
      ftype_help = '''
@@ -381,7 +388,7 @@ def handleUser(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "user %s" % str(i)
+            print("user %s" % str(i))
 
  def setupUserParser(subparsers):
      generated_usage = generate_custom_usage(usage_user, usage_user_dict)
@@ -430,7 +437,7 @@ def handlePort(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "port %s" % str(i)
+            print("port %s" % str(i))
 
  def setupPortParser(subparsers):
      generated_usage = generate_custom_usage(usage_port, usage_port_dict)
@@ -473,7 +480,7 @@ def handleInterface(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "interface %s" % str(i)
+            print("interface %s" % str(i))
 
  def setupInterfaceParser(subparsers):
      generated_usage = generate_custom_usage(usage_interface, usage_interface_dict)
@@ -512,7 +519,7 @@ def handleModule(args):
          OBJECT.list(args.noheading, args.locallist)
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "module %s" % str(i)
+            print("module %s" % str(i))
 
  def setupModuleParser(subparsers):
      moduleParser = subparsers.add_parser('module', help=_('Manage SELinux policy modules'))
@@ -552,7 +559,7 @@ def handleNode(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "node %s" % str(i)
+            print("node %s" % str(i))
 
  def setupNodeParser(subparsers):
      generated_usage = generate_custom_usage(usage_node, usage_node_dict)
@@ -584,10 +591,10 @@ def handleBoolean(args):
          sys.exit(2)
      # TODO: should be added to handle_opts logic
      elif args.action is "modify" and not args.boolean:
-        print "boolean name required "
+        print("boolean name required ")
          sys.exit(1)
      elif args.action is "modify" and args.boolean and not args.state:
-        print "state option is needed"
+        print("state option is needed")
          sys.exit(1)
      else:
          handle_opts(args,boolean_args,args.action)
@@ -604,7 +611,7 @@ def handleBoolean(args):
          OBJECT.deleteall()
      if args.action is "extract":
          for i in OBJECT.customized():
-            print "boolean %s" % str(i)
+            print("boolean %s" % str(i))
 
  def setupBooleanParser(subparsers):
      generated_usage = generate_custom_usage(usage_boolean, usage_boolean_dict)
@@ -670,11 +677,11 @@ def setupDontauditParser(subparsers):
  def handleExport(args):
      manageditems=[ "boolean", "login", "interface", "user", "port", "node", "fcontext", "module"]
      for i in manageditems:
-        print "%s -D" % i
+        print("%s -D" % i)
      for i in manageditems:
          OBJECT = object_dict[i]()
          for c in OBJECT.customized():
-            print "%s %s" % (i, str(c))
+            print("%s %s" % (i, str(c)))
 
      sys.exit(0)
 
@@ -743,10 +750,10 @@ def handleImport(args):
              commandParser = createCommandParser()
              args = commandParser.parse_args(mkargv(l))
              args.func(args)
-        except ValueError,e:
+        except ValueError as e:
              sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
              sys.exit(1)
-        except IOError,e:
+        except IOError as e:
              sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
              sys.exit(1)
          except KeyboardInterrupt:
@@ -822,21 +829,21 @@ def do_parser():
          args = commandParser.parse_args(make_args(sys.argv))
          args.func(args)
          sys.exit(0)
-    except IOError,e:
+    except IOError as e:
          sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
          sys.exit(1)
      except KeyboardInterrupt:
          sys.exit(0)
-    except ValueError, e:
+    except ValueError as e:
          sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
          sys.exit(1)
-    except KeyError, e:
+    except KeyError as e:
          sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
          sys.exit(1)
-    except OSError, e:
+    except OSError as e:
          sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[1]))
          sys.exit(1)
-    except RuntimeError, e:
+    except RuntimeError as e:
          sys.stderr.write("%s: %s\n" % (e.__class__.__name__, e.args[0]))
          sys.exit(1)
 
policycoreutils/semanage/test-semanage.py +2 -2
index d39013e..fc8368e 100644
@@ -273,10 +273,10 @@ if __name__ == "__main__":
              args = parser.parse_args()
              args.func(args)
              sys.exit(0)
-        except ValueError,e:
+        except ValueError as e:
              sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
              sys.exit(1)
-        except IOError,e:
+        except IOError as e:
              sys.stderr.write("%s: %s\n" % (e.__class__.__name__, str(e)))
              sys.exit(1)
          except KeyboardInterrupt:
author
#6 lore raw

PATCH 4/4 policycoreutils/scripts: improve compatibility with Python 3

In reply to Michal Srb

- __builtin__ module has been renamed to "builtins" in Python 3
- use reserved word as in try-except
- replace print statement with print function
- migrate from commands to subprocess
- fix formatting

---
 policycoreutils/scripts/chcat | 80 +++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 38 deletions(-)
policycoreutils/scripts/chcat +42 -38
index 9efcb22..21212be 100755
@@ -22,15 +22,19 @@
 #                                        02111-1307  USA
 #
 #  
-import commands, sys, os, pwd, string, getopt, selinux
+import subprocess, sys, os, pwd, string, getopt, selinux
 import seobject
 import gettext
 
 try:
     gettext.install('policycoreutils')
 except IOError:
-       import __builtin__
-       __builtin__.__dict__['_'] = unicode
+    try:
+        import builtins
+        builtins.__dict__['_'] = str
+    except ImportError:
+        import __builtin__
+        __builtin__.__dict__['_'] = unicode
 
 def errorExit(error):
     sys.stderr.write("%s: " % sys.argv[0])
@@ -80,9 +84,9 @@ def chcat_user_add(newcat, users):
             cmd = "semanage login -a -r %s -s %s %s" % (new_serange, user[0], u)
         else:
             cmd = "semanage login -m -r %s -s %s %s" % (new_serange, user[0], u)
-        rc = commands.getstatusoutput(cmd)
+        rc = subprocess.getstatusoutput(cmd)
         if rc[0] != 0:
-            print rc[1]
+            print(rc[1])
             errors += 1
 
     return errors
@@ -107,7 +111,7 @@ def chcat_add(orig, newcat, objects,login_ind):
 
         if len(clist) > 1:
             if cat in clist[1:]:
-                print _("%s is already in %s") % (f, orig)
+                print(_("%s is already in %s") % (f, orig))
                 continue
             clist.append(cat)
             cats = clist[1:]
@@ -118,9 +122,9 @@ def chcat_add(orig, newcat, objects,login_ind):
         else:
             cat_string = cat
         cmd = 'chcon -l %s:%s %s' % (sensitivity, cat_string, f)
-        rc = commands.getstatusoutput(cmd)
+        rc = subprocess.getstatusoutput(cmd)
         if rc[0] != 0:
-            print rc[1]
+            print(rc[1])
             errors += 1
     return errors
 
@@ -158,9 +162,9 @@ def chcat_user_remove(newcat, users):
             cmd = "semanage login -a -r %s -s %s %s" % (new_serange, user[0], u)
         else:
             cmd = "semanage login -m -r %s -s %s %s" % (new_serange, user[0], u)
-        rc = commands.getstatusoutput(cmd)
+        rc = subprocess.getstatusoutput(cmd)
         if rc[0] != 0:
-            print rc[1]
+            print(rc[1])
             errors += 1
     return errors
         
@@ -185,7 +189,7 @@ def chcat_remove(orig, newcat, objects, login_ind):
             
         if len(clist) > 1:
             if cat not in clist[1:]:
-                print _("%s is not in %s") % (f, orig)
+                print(_("%s is not in %s") % (f, orig))
                 continue
             clist.remove(cat)
             if len(clist) > 1:
@@ -195,16 +199,16 @@ def chcat_remove(orig, newcat, objects, login_ind):
             else:
                 cat = ""
         else:
-                print _("%s is not in %s") % (f, orig)
+                print(_("%s is not in %s") % (f, orig))
                 continue
         
         if len(cat) == 0: 
             cmd = 'chcon -l %s %s' % (sensitivity, f)
         else:
             cmd = 'chcon -l %s:%s %s' % (sensitivity,cat, f)
-        rc = commands.getstatusoutput(cmd)
+        rc = subprocess.getstatusoutput(cmd)
         if rc[0] != 0:
-            print rc[1]
+            print(rc[1])
             errors += 1
     return errors
 
@@ -229,9 +233,9 @@ def chcat_user_replace(newcat, users):
             cmd = "semanage login -a -r %s -s %s %s" % (new_serange, user[0], u)
         else:
             cmd = "semanage login -m -r %s -s %s %s" % (new_serange, user[0], u)
-        rc = commands.getstatusoutput(cmd)
+        rc = subprocess.getstatusoutput(cmd)
         if rc[0] != 0:
-            print rc[1]
+            print(rc[1])
             errors += 1
     return errors
     
@@ -251,9 +255,9 @@ def chcat_replace(newcat, objects, login_ind):
     for f in objects:
         cmd = "%s %s" % (cmd, f)
 
-    rc = commands.getstatusoutput(cmd)
+    rc = subprocess.getstatusoutput(cmd)
     if rc[0] != 0:
-        print rc[1]
+        print(rc[1])
         errors += 1
 
     return errors
@@ -322,18 +326,18 @@ def translate(cats):
     return newcat
     
 def usage():
-	print _("Usage %s CATEGORY File ...") % sys.argv[0]
-	print _("Usage %s -l CATEGORY user ...") % sys.argv[0]
-	print _("Usage %s [[+|-]CATEGORY],...]q File ...") % sys.argv[0]
-	print _("Usage %s -l [[+|-]CATEGORY],...]q user ...") % sys.argv[0]
-	print _("Usage %s -d File ...") % sys.argv[0]
-	print _("Usage %s -l -d user ...") % sys.argv[0]
-	print _("Usage %s -L") % sys.argv[0]
-	print _("Usage %s -L -l user") % sys.argv[0]
-        print _("Use -- to end option list.  For example")
-        print _("chcat -- -CompanyConfidential /docs/businessplan.odt")
-        print _("chcat -l +CompanyConfidential juser")
-	sys.exit(1)
+    print(_("Usage %s CATEGORY File ...") % sys.argv[0])
+    print(_("Usage %s -l CATEGORY user ...") % sys.argv[0])
+    print(_("Usage %s [[+|-]CATEGORY],...]q File ...") % sys.argv[0])
+    print(_("Usage %s -l [[+|-]CATEGORY],...]q user ...") % sys.argv[0])
+    print(_("Usage %s -d File ...") % sys.argv[0])
+    print(_("Usage %s -l -d user ...") % sys.argv[0])
+    print(_("Usage %s -L") % sys.argv[0])
+    print(_("Usage %s -L -l user") % sys.argv[0])
+    print(_("Use -- to end option list.  For example"))
+    print(_("chcat -- -CompanyConfidential /docs/businessplan.odt"))
+    print(_("chcat -l +CompanyConfidential juser"))
+    sys.exit(1)
 
 def listcats():
     fd = open(selinux.selinux_translations_path())
@@ -342,7 +346,7 @@ def listcats():
             continue
         if l.find("=") != -1:
             rec = l.split("=")
-            print "%-30s %s" % tuple(rec)
+            print("%-30s %s" % tuple(rec))
     fd.close()
     return 0
     
@@ -356,12 +360,12 @@ def listusercats(users):
         cats = seobject.translate(selinux.getseuserbyname(u)[2])
         cats = cats.split("-")
         if len(cats) > 1 and cats[1] != "s0":
-            print "%s: %s" % (u, cats[1])
+            print("%s: %s" % (u, cats[1]))
         else:
-            print "%s: %s" % (u, cats[0])
+            print("%s: %s" % (u, cats[0]))
             
 def error(msg):
-    print "%s: %s" % (sys.argv[0], msg)
+    print("%s: %s" % (sys.argv[0], msg))
     sys.exit(1)
     
 if __name__ == '__main__':
@@ -395,10 +399,10 @@ if __name__ == '__main__':
         if list_ind == 0 and len(cmds) < 1:
             usage()
 
-    except getopt.error, error:
+    except getopt.error as error:
         errorExit(_("Options Error %s ") % error.msg)
 
-    except ValueError, e:
+    except ValueError as e:
         usage()
 
     if delete_ind:
@@ -433,9 +437,9 @@ if __name__ == '__main__':
                 if len(c) > 0 and c[0] == "-":
                     errors += chcat_remove(c[1:],translate(l), objects, login_ind)
                     continue
-    except ValueError, e:
+    except ValueError as e:
         error(e)
-    except OSError, e:
+    except OSError as e:
         error(e)
     
     sys.exit(errors)
Signature · 1 line
2.4.3
#7 lore raw
In reply to Michal Srb
Quoted 11 lines · Michal Srb

Hello,

These patches try to add Python 3 support to the following places under policycoreutils/:

audit2allow/
sandbox/
scripts/
semanage/ (except seobject.py)

Patch for the seobject.py should follow later.

Thanks, applied.