regulator: Question about the buck_volt_range and MT6311_MAX_UV setting
Hi Henry,
Seems something wrong in either buck_volt_range or MT6311_MAX_UV setting.
.n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1 (1400000 - 600000) / 6250 + 1 = 129
So .n_voltages = 129.
Quoted 1 line
From the
buck_volt_range:
The linear range has min_sel: 0, max_sel: 0x7f (0 ~ 127, so 128 selector in this range) And the max voltage is
600000 + 0x7f * 6250 = 1393750
I don't have the datasheet, so can you double check this? Thank,
Axel
On Thu, 2015-07-30 at 21:10 +0800, Axel Lin wrote:
Hi Axel,
Oh..it was 1.4V on data sheet, but I think you're right, MT6311_MAX_UV should be 1393750 was more precisely, I will change that.
Thanks.
Quoted 18 lines
Hi Henry,
Seems something wrong in eitherbuck_volt_rangeorMT6311_MAX_UVsetting..n_voltages = (
MT6311_MAX_UV-MT6311_MIN_UV) /MT6311_STEP_UV+ 1 (1400000 - 600000) / 6250 + 1 = 129
So .n_voltages = 129.From the
buck_volt_range:
The linear range hasmin_sel: 0,max_sel:0x7f(0 ~ 127, so 128 selector in this range) And the max voltage is
600000 +0x7f* 6250 = 1393750I don't have the datasheet, so can you double check this? Thank,
Axel