Patch "xhci: Calculate old endpoints correctly on device reset" has been added to the 3.10-stable tree

This is a note to let you know that I've just added the patch titled

xhci: Calculate old endpoints correctly on device reset

to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
xhci-calculate-old-endpoints-correctly-on-device-reset.patch
and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Brian Campbell <[email protected]>
Date: Tue, 21 Jul 2015 17:20:28 +0300
Subject: xhci: Calculate old endpoints correctly on device reset

From: Brian Campbell <[email protected]>

commit 326124a027abc9a7f43f72dc94f6f0f7a55b02b3 upstream.

When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily.

This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached.

The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth.

---
 drivers/usb/host/xhci.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -3356,6 +3356,9 @@ int xhci_discover_or_reset_device(struct
 			return -EINVAL;
 	}
 
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
 	if (virt_dev->udev != udev) {
 		/* If the virt_dev and the udev does not match, this virt_dev
 		 * may belong to another udev.

Patches currently in stable-queue which might be from [email protected] are

queue-3.10/xhci-calculate-old-endpoints-correctly-on-device-reset.patch