Re garding Boot Rom Location
Hi,
We have designed MPC8548 based AMC card. We are using uboot-1.2.0. In
our board PCIe was configuread as Agent. Is it possible to configure Boot Rom Location as PCI Express. If it is possible means using this defualt 8MB Boot Rom Location shall we access PCI Express card (Without doing Bus enumeration) ?.
Thanks and Regards
Sivaji
Signature · 2 lines
View this message in context: http://www.nabble.com/Regarding-Boot-Rom-Location-tp14394207p14394207.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Hi Sivaji,
Please let me know the exact requirment of doing this, I will try to help you.
Regards,
MGR
----- Original Message -----
From: "sivaji" <[email protected]>
To: <[email protected]>
Sent: Tuesday, December 18, 2007 3:17 AM
Subject: [U-Boot-Users] Re garding Boot Rom Location
Quoted 30 lines
Hi,
We have designed MPC8548 based AMC card. We are using uboot-1.2.0. In
our board PCIe was configuread as Agent. Is it possible to configure Boot Rom Location as PCI Express. If it is possible means using this defualt 8MB
Boot Rom Location shall we access PCI Express card (Without doing Bus enumeration) ?.Thanks and Regards
SivajiSignature · 15 lines
View this message in context: http://www.nabble.com/Regarding-Boot-Rom-Location-tp14394207p14394207.html Sent from the Uboot - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users