sunxi: Add support for the Olimex A20 EVB

PATCH Superseded codekipper at gmail.com 1 participant 1 message Aug 19, 2015

Subsystems (2)

Arm (32-bit) Arm/Allwinner sunXi SoC support

lore

Share & tools

lore

codekipper at gmail.com

author

2015-08-19 16:57 UTC #0 lore raw

PATCH 1/1 sunxi: Add support for the Olimex A20 EVB

From: Marcus Cooper <[email protected]>

---
 arch/arm/dts/Makefile                    |   1 +
 arch/arm/dts/sun7i-a20-olinuxino-evb.dts | 233 +++++++++++++++++++++++++++++++
 board/sunxi/MAINTAINERS                  |   5 +
 configs/A20-OLinuXino-EVB_defconfig      |  17 +++
 4 files changed, 256 insertions(+)
 create mode 100644 arch/arm/dts/sun7i-a20-olinuxino-evb.dts
 create mode 100644 configs/A20-OLinuXino-EVB_defconfig

arch/arm/dts/Makefile +1 -0

index d9a2f5f..dc9a500 100644
@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-m5.dtb \
 	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olinuxino-evb.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-micro.dtb \

arch/arm/dts/sun7i-a20-olinuxino-evb.dts new file +233 -0

233 lines not on this page · raw message

board/sunxi/MAINTAINERS +5 -0

index 1b44ce8..6dd55a2 100644
@@ -45,6 +45,11 @@ F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 F:	include/configs/sun9i.h
 F:	configs/Merrii_A80_Optimus_defconfig
 
+A20-OLINUXINO-EVB BOARD
+M:	Marcus Cooper <[email protected]>
+S:	Maintained
+F:	configs/A20-OLinuXino-EVB_defconfig
+
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <[email protected]>
 S:	Maintained

configs/A20-OLinuXino-EVB_defconfig new file +17 -0

new file mode 100644
index 0000000..a4d0978
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=480
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-evb"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_USB_EHCI_HCD=y
+

Signature · 1 line

2.5.0