Skip to contentSkip to conversation

Pull-request: u-boot-spi/master

U-Boot Jagan Teki 4 participants 12 messages Sep 15, 2015 – Oct 11, 2015

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

thanks!
Jagan.

The following changes since commit 850f788709cef8f7d53d571aec3bfb73b14c5531:

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2015-09-13 17:25:16 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to a63981e1727139c51f05d3fa1cb1b299d2c00a7d:

zynq-common: Add SPL SPI offset, size configs (2015-09-15 13:31:44 +0530)

----------------------------------------------------------------
Jagan Teki (23):
spi: Add zynq qspi controller driver
dts: zynq: Add zynq qspi controller nodes
doc: device-tree-bindings: spi: Add zynq qspi info
dts: microzed: Enable zynq qspi controller node
dts: zc702: Enable zynq qspi controller node
dts: zc706: Enable zynq qspi controller node
dts: zc770-xm010: Enable zynq qspi controller node
dts: zed: Enable zynq qspi controller node
configs: Enable legacy SPI flash interface support
zynq-common: Enable zynq qspi controller support
zynq-common: Enable Bank/Extended address register support
configs: zynq: Enable zynq qspi controller
spi: Kconfig: Add Zynq QSPI controller entry
spi: zynq_spi: Add config reg shift named macros
spi: zynq_spi: Rename baudrate divisor mask name
spi: zynq_spi: Store cs value into private data
sf: params: Add IS25LP032 part support
sf: params: Add IS25LP064 part support
sf: params: Add IS25LP128 part support
zynq-common: Enable ISSI SPI-NOR flash support
spi: xilinx_spi: Fix to configure CPOL, CPHA mask
spi: zynq_spi: Fix to configure CPOL, CPHA mask
spi: zynq_qspi: Fix to configure CPOL, CPHA mask

Mirza Krak (1):
spi: tegra20: Add support for mode selection

Siva Durga Prasad Paladugu (1):
zynq-common: Add SPL SPI offset, size configs

 arch/arm/dts/zynq-7000.dtsi                    |  12 +
 arch/arm/dts/zynq-microzed.dts                 |   5 +
 arch/arm/dts/zynq-zc702.dts                    |   5 +
 arch/arm/dts/zynq-zc706.dts                    |   5 +
 arch/arm/dts/zynq-zc770-xm010.dts              |   7 +-
 arch/arm/dts/zynq-zed.dts                      |   5 +
 configs/zynq_microzed_defconfig                |   2 +
 configs/zynq_zc702_defconfig                   |   2 +
 configs/zynq_zc706_defconfig                   |   2 +
 configs/zynq_zc70x_defconfig                   |   2 +
 configs/zynq_zc770_xm010_defconfig             |   1 +
 configs/zynq_zed_defconfig                     |   2 +
 doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++
 drivers/mtd/spi/sf_params.c                    |   5 +
 drivers/spi/Kconfig                            |   9 +
 drivers/spi/Makefile                           |   1 +
 drivers/spi/tegra20_slink.c                    |  21 +
 drivers/spi/xilinx_spi.c                       |  10 +-
 drivers/spi/zynq_qspi.c                        | 623 +++++++++++++++++++++++++
 drivers/spi/zynq_spi.c                         |  27 +-
 include/configs/zynq-common.h                  |  15 +
 21 files changed, 771 insertions(+), 16 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/spi-zynq-qspi.txt
 create mode 100644 drivers/spi/zynq_qspi.c
#1 lore raw

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Quoted 65 lines

thanks!
Jagan.

The following changes since commit 850f788709cef8f7d53d571aec3bfb73b14c5531:

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2015-09-13 17:25:16 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to a63981e1727139c51f05d3fa1cb1b299d2c00a7d:

zynq-common: Add SPL SPI offset, size configs (2015-09-15 13:31:44 +0530)

----------------------------------------------------------------
Jagan Teki (23):
spi: Add zynq qspi controller driver
dts: zynq: Add zynq qspi controller nodes
doc: device-tree-bindings: spi: Add zynq qspi info
dts: microzed: Enable zynq qspi controller node
dts: zc702: Enable zynq qspi controller node
dts: zc706: Enable zynq qspi controller node
dts: zc770-xm010: Enable zynq qspi controller node
dts: zed: Enable zynq qspi controller node
configs: Enable legacy SPI flash interface support
zynq-common: Enable zynq qspi controller support
zynq-common: Enable Bank/Extended address register support
configs: zynq: Enable zynq qspi controller
spi: Kconfig: Add Zynq QSPI controller entry
spi: zynq_spi: Add config reg shift named macros
spi: zynq_spi: Rename baudrate divisor mask name
spi: zynq_spi: Store cs value into private data
sf: params: Add IS25LP032 part support
sf: params: Add IS25LP064 part support
sf: params: Add IS25LP128 part support
zynq-common: Enable ISSI SPI-NOR flash support
spi: xilinx_spi: Fix to configure CPOL, CPHA mask
spi: zynq_spi: Fix to configure CPOL, CPHA mask
spi: zynq_qspi: Fix to configure CPOL, CPHA mask

Mirza Krak (1):
spi: tegra20: Add support for mode selection

Siva Durga Prasad Paladugu (1):
zynq-common: Add SPL SPI offset, size configs

 arch/arm/dts/zynq-7000.dtsi                    |  12 +
 arch/arm/dts/zynq-microzed.dts                 |   5 +
 arch/arm/dts/zynq-zc702.dts                    |   5 +
 arch/arm/dts/zynq-zc706.dts                    |   5 +
 arch/arm/dts/zynq-zc770-xm010.dts              |   7 +-
 arch/arm/dts/zynq-zed.dts                      |   5 +
 configs/zynq_microzed_defconfig                |   2 +
 configs/zynq_zc702_defconfig                   |   2 +
 configs/zynq_zc706_defconfig                   |   2 +
 configs/zynq_zc70x_defconfig                   |   2 +
 configs/zynq_zc770_xm010_defconfig             |   1 +
 configs/zynq_zed_defconfig                     |   2 +
 doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++
 drivers/mtd/spi/sf_params.c                    |   5 +
 drivers/spi/Kconfig                            |   9 +
 drivers/spi/Makefile                           |   1 +
Quoted 8 lines
 drivers/spi/tegra20_slink.c                    |  21 +
 drivers/spi/xilinx_spi.c                       |  10 +-
 drivers/spi/zynq_qspi.c                        | 623 +++++++++++++++++++++++++
 drivers/spi/zynq_spi.c                         |  27 +-
 include/configs/zynq-common.h                  |  15 +
 21 files changed, 771 insertions(+), 16 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/spi-zynq-qspi.txt
 create mode 100644 drivers/spi/zynq_qspi.c

Regards,
Simon

author
#2 lore raw

Hi Michal,

Quoted 5 lines · Simon Glass

Hi Jagan,

Quoted 2 lines · Jagan Teki

Hi Tom,

Quoted 8 lines
Quoted 5 lines

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Quoted 62 lines
Quoted 62 lines

The following changes since commit 850f788709cef8f7d53d571aec3bfb73b14c5531:

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2015-09-13 17:25:16 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to a63981e1727139c51f05d3fa1cb1b299d2c00a7d:

zynq-common: Add SPL SPI offset, size configs (2015-09-15 13:31:44 +0530)

----------------------------------------------------------------
Jagan Teki (23):
spi: Add zynq qspi controller driver
dts: zynq: Add zynq qspi controller nodes
doc: device-tree-bindings: spi: Add zynq qspi info
dts: microzed: Enable zynq qspi controller node
dts: zc702: Enable zynq qspi controller node
dts: zc706: Enable zynq qspi controller node
dts: zc770-xm010: Enable zynq qspi controller node
dts: zed: Enable zynq qspi controller node
configs: Enable legacy SPI flash interface support
zynq-common: Enable zynq qspi controller support
zynq-common: Enable Bank/Extended address register support
configs: zynq: Enable zynq qspi controller
spi: Kconfig: Add Zynq QSPI controller entry
spi: zynq_spi: Add config reg shift named macros
spi: zynq_spi: Rename baudrate divisor mask name
spi: zynq_spi: Store cs value into private data
sf: params: Add IS25LP032 part support
sf: params: Add IS25LP064 part support
sf: params: Add IS25LP128 part support
zynq-common: Enable ISSI SPI-NOR flash support
spi: xilinx_spi: Fix to configure CPOL, CPHA mask
spi: zynq_spi: Fix to configure CPOL, CPHA mask
spi: zynq_qspi: Fix to configure CPOL, CPHA mask

Mirza Krak (1):
spi: tegra20: Add support for mode selection

Siva Durga Prasad Paladugu (1):
zynq-common: Add SPL SPI offset, size configs

 arch/arm/dts/zynq-7000.dtsi                    |  12 +
 arch/arm/dts/zynq-microzed.dts                 |   5 +
 arch/arm/dts/zynq-zc702.dts                    |   5 +
 arch/arm/dts/zynq-zc706.dts                    |   5 +
 arch/arm/dts/zynq-zc770-xm010.dts              |   7 +-
 arch/arm/dts/zynq-zed.dts                      |   5 +
 configs/zynq_microzed_defconfig                |   2 +
 configs/zynq_zc702_defconfig                   |   2 +
 configs/zynq_zc706_defconfig                   |   2 +
 configs/zynq_zc70x_defconfig                   |   2 +
 configs/zynq_zc770_xm010_defconfig             |   1 +
 configs/zynq_zed_defconfig                     |   2 +
 doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++
 drivers/mtd/spi/sf_params.c                    |   5 +
 drivers/spi/Kconfig                            |   9 +
 drivers/spi/Makefile                           |   1 +
Quoted 8 lines
Quoted 8 lines
 drivers/spi/tegra20_slink.c                    |  21 +
 drivers/spi/xilinx_spi.c                       |  10 +-
 drivers/spi/zynq_qspi.c                        | 623 +++++++++++++++++++++++++
 drivers/spi/zynq_spi.c                         |  27 +-
 include/configs/zynq-common.h                  |  15 +
 21 files changed, 771 insertions(+), 16 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/spi-zynq-qspi.txt
 create mode 100644 drivers/spi/zynq_qspi.c

thanks!

Signature · 1 line
Jagan.
#3 lore raw
Quoted 14 lines · Jagan Teki

Hi Michal,

Quoted 11 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

Quoted 8 lines
Quoted 2 lines

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Thanks,
Michal

#4 lore raw
Quoted 18 lines · Michal Simek
Quoted 17 lines · Jagan Teki

Hi Michal,

Quoted 13 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Quoted 8 lines
Quoted 5 lines

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Thanks,
Michal

author
#5 lore raw

Hi Michal,

Quoted 23 lines · Michal Simek
Quoted 22 lines · Michal Simek
Quoted 21 lines · Jagan Teki

Hi Michal,

Quoted 5 lines · Simon Glass

Hi Jagan,

Quoted 2 lines · Jagan Teki

Hi Tom,

Quoted 8 lines
Quoted 5 lines

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Please send your PR on top of these changes, and let me know for any inputs.

thanks!

Signature · 1 line
Jagan | openedev.
author
#6 lore raw
Quoted 28 lines · Jagan Teki

Hi Michal,

Quoted 25 lines · Michal Simek
Quoted 24 lines · Michal Simek
Quoted 22 lines · Jagan Teki

Hi Michal,

Quoted 5 lines · Simon Glass

Hi Jagan,

Quoted 2 lines · Jagan Teki

Hi Tom,

Quoted 8 lines
Quoted 5 lines

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Please send your PR on top of these changes, and let me know for any inputs.

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

-- Jagan.

#7 lore raw
Quoted 32 lines · Jagan Teki
Quoted 31 lines · Jagan Teki

Hi Michal,

Quoted 28 lines · Michal Simek
Quoted 26 lines · Michal Simek
Quoted 14 lines · Jagan Teki

Hi Michal,

Quoted 11 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

Quoted 8 lines
Quoted 2 lines

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Please send your PR on top of these changes, and let me know for any inputs.

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

Next week I will look at it.

Thanks,
Michal

#8 lore raw

Hi Jagan,

Quoted 36 lines · Michal Simek
Quoted 35 lines · Jagan Teki
Quoted 34 lines · Jagan Teki

Hi Michal,

Quoted 30 lines · Michal Simek
Quoted 18 lines · Michal Simek
Quoted 17 lines · Jagan Teki

Hi Michal,

Quoted 13 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Quoted 8 lines
Quoted 5 lines

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

Please send your PR on top of these changes, and let me know for any inputs.

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

Next week I will look at it.

All your patches will go on the top of zynq/zynqmp patches and the merge will happen after 2015.10.
Is there any particular reason to push these changes before 2015.10?

Thanks,
Michal

#9 lore raw
Quoted 41 lines · Michal Simek

Hi Jagan,

Quoted 38 lines · Michal Simek
Quoted 37 lines · Jagan Teki
Quoted 35 lines · Jagan Teki

Hi Michal,

Quoted 23 lines · Michal Simek
Quoted 22 lines · Michal Simek
Quoted 21 lines · Jagan Teki

Hi Michal,

Quoted 5 lines · Simon Glass

Hi Jagan,

Quoted 2 lines · Jagan Teki

Hi Tom,

Quoted 8 lines
Quoted 5 lines

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Please send your PR on top of these changes, and let me know for any inputs.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

Next week I will look at it.

All your patches will go on the top of zynq/zynqmp patches and the merge will happen after 2015.10.
Is there any particular reason to push these changes before 2015.10?

I had/have been holding this for after the merge window. If there are any release-critical fixes in the SPI tree they need to be put into a separate pull request asap. Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151009/ec96b02c/attachment.sig>
#10 lore raw

Hi Tom,

Quoted 47 lines · Tom Rini
Quoted 46 lines · Michal Simek

Hi Jagan,

Quoted 42 lines · Michal Simek
Quoted 32 lines · Jagan Teki
Quoted 31 lines · Jagan Teki

Hi Michal,

Quoted 28 lines · Michal Simek
Quoted 26 lines · Michal Simek
Quoted 14 lines · Jagan Teki

Hi Michal,

Quoted 11 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

Quoted 8 lines
Quoted 2 lines

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Please send your PR on top of these changes, and let me know for any inputs.

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

Next week I will look at it.

Quoted 7 lines
Quoted 3 lines

All your patches will go on the top of zynq/zynqmp patches and the merge will happen after 2015.10.
Is there any particular reason to push these changes before 2015.10?

I had/have been holding this for after the merge window. If there are any release-critical fixes in the SPI tree they need to be put into a separate pull request asap. Thanks!

Good. I was talking to Simon yesterday and retest zynq and zynqmp SPL DM changes which should go first to your tree and then these spi changes should go on the top.

Thanks,
Michal

author
#11 lore raw
Quoted 54 lines · Michal Simek

Hi Tom,

Quoted 51 lines · Tom Rini
Quoted 49 lines · Michal Simek

Hi Jagan,

Quoted 36 lines · Michal Simek
Quoted 35 lines · Jagan Teki
Quoted 34 lines · Jagan Teki

Hi Michal,

Quoted 30 lines · Michal Simek
Quoted 18 lines · Michal Simek
Quoted 17 lines · Jagan Teki

Hi Michal,

Quoted 13 lines · Simon Glass

Hi Jagan,

Quoted 7 lines · Jagan Teki

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

These are for the zynq maintainer I think. They are not assigned to me in patchwork.

Quoted 8 lines
Quoted 5 lines

Seems like this patch[1] resolves the SPL build issue, any plan on pushing this? of-course I will test this and let you know.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=commitdiff;h=7916a8cf902177afd20a09527a9cf307622bb6d2

Simon: Are you going to push it? Or do you want me to collect all of these zynq/zynqmp patches?

Sorry I have read Simon's reaction after. I will try to collect all these zynq patches and will send pull request.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

Please send your PR on top of these changes, and let me know for any inputs.

Seems like Michal is busy with something, Shall I go with build fix (not sure whether it's working SPI-SPL or not)

Next week I will look at it.

All your patches will go on the top of zynq/zynqmp patches and the merge will happen after 2015.10.
Is there any particular reason to push these changes before 2015.10?

Quoted 7 lines
Quoted 3 lines

I had/have been holding this for after the merge window. If there are any release-critical fixes in the SPI tree they need to be put into a separate pull request asap. Thanks!

Good. I was talking to Simon yesterday and retest zynq and zynqmp SPL DM changes which should go first to your tree and then these spi changes should go on the top.

No hurry with the zynq qspi patches for this release, will send the PR again after release.
Meanwhile, I sent one more for this release [1], pls- pull the same.

[1] https://patchwork.ozlabs.org/patch/528729/

-- Jagan.