Skip to contentSkip to conversation

FAILED: patch "[PATCH] staging: comedi: adl_pci7x3x: fix digital output on PCI-7230" failed to apply to 3.10-stable tree

PATCH [email protected] 1 participant 1 message Sep 15, 2015

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 3.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

Quoted 1 line

From ad83dbd974feb2e2a8cc071a1d28782bd4d2c70e Mon Sep 17 00:00:00 2001

From: Ian Abbott <[email protected]>
Date: Tue, 11 Aug 2015 13:05:10 +0100
Subject: [PATCH] staging: comedi: adl_pci7x3x: fix digital output on PCI-7230

The "adl_pci7x3x" driver replaced the "adl_pci7230" and "adl_pci7432" drivers in commits 8f567c373c4b ("staging: comedi: new adl_pci7x3x driver") and 657f77d173d3 ("staging: comedi: remove adl_pci7230 and adl_pci7432 drivers"). Although the new driver code agrees with the user manuals for the respective boards, digital outputs stopped working on the PCI-7230. This has 16 digital output channels and the previous adl_pci7230 driver shifted the 16 bit output state left by 16 bits before writing to the hardware register. The new adl_pci7x3x driver doesn't do that. Fix it in adl_pci7x3x_do_insn_bits() by checking for the special case of the subdevice having only 16 channels and duplicating the 16 bit output state into both halves of the 32-bit register. That should work both for what the board actually does and for what the user manual says it should do.

Fixes 8f567c373c4b ("staging: comedi: new adl_pci7x3x driver")
Cc <[email protected]> # 3.13+, needs backporting for 3.7 to 3.12
drivers/staging/comedi/drivers/adl_pci7x3x.c +14 -2
index 934af3ff7897..b0fc027cf485 100644
@@ -120,8 +120,20 @@ static int adl_pci7x3x_do_insn_bits(struct comedi_device *dev,
 {
 	unsigned long reg = (unsigned long)s->private;
 
-	if (comedi_dio_update_state(s, data))
-		outl(s->state, dev->iobase + reg);
+	if (comedi_dio_update_state(s, data)) {
+		unsigned int val = s->state;
+
+		if (s->n_chan == 16) {
+			/*
+			 * It seems the PCI-7230 needs the 16-bit DO state
+			 * to be shifted left by 16 bits before being written
+			 * to the 32-bit register.  Set the value in both
+			 * halves of the register to be sure.
+			 */
+			val |= val << 16;
+		}
+		outl(val, dev->iobase + reg);
+	}
 
 	data[1] = s->state;