Patch "serial: 8250_pci: Add support for Pericom PI7C9X795[1248]" has been added to the 4.1-stable tree

PATCH [email protected] 1 participant 1 message Sep 17, 2015

Subsystems (2)

Stable branch TTY layer and serial drivers

lore

Share & tools

lore

[email protected]

author maintainer Applied

2015-09-17 05:24 UTC #0 lore raw

This is a note to let you know that I've just added the patch titled

    serial: 8250_pci: Add support for Pericom PI7C9X795[1248]

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     serial-8250_pci-add-support-for-pericom-pi7c9x795.patch

and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 89c043a6cb2d4525d48a38ed78d5f0f5672338b3 Mon Sep 17 00:00:00 2001

From: Adam Lee <[email protected]>
Date: Mon, 3 Aug 2015 13:28:13 +0800
Subject: serial: 8250_pci: Add support for Pericom PI7C9X795[1248]

From: Adam Lee <[email protected]>

commit 89c043a6cb2d4525d48a38ed78d5f0f5672338b3 upstream.

Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this patch enables them, also defines PCI_VENDOR_ID_PERICOM here.

Signed-off-by Adam Lee <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/tty/serial/8250/8250_pci.c |   82 +++++++++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 21 deletions(-)

drivers/tty/serial/8250/8250_pci.c +61 ~~-21~~

@@ -2000,6 +2000,12 @@ pci_wch_ch38x_setup(struct serial_privat
 
 #define PCI_DEVICE_ID_EXAR_XR17V8358	0x8358
 
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588

@@ -2314,27 +2320,12 @@ static struct pci_serial_quirk pci_seria
 	 * Pericom
 	 */
 	{
-		.vendor		= 0x12d8,
-		.device		= 0x7952,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7954,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7958,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
+		.vendor         = PCI_VENDOR_ID_PERICOM,
+		.device         = PCI_ANY_ID,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_pericom_setup,
 	},
-
 	/*
 	 * PLX
 	 */

@@ -3031,6 +3022,10 @@ enum pci_board_num_t {
 	pbn_fintek_8,
 	pbn_fintek_12,
 	pbn_wch384_4,
+	pbn_pericom_PI7C9X7951,
+	pbn_pericom_PI7C9X7952,
+	pbn_pericom_PI7C9X7954,
+	pbn_pericom_PI7C9X7958,
 };
 
 /*

@@ -3848,7 +3843,6 @@ static struct pciserial_board pci_boards
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
-
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,

@@ -3856,6 +3850,33 @@ static struct pciserial_board pci_boards
 		.uart_offset    = 8,
 		.first_offset   = 0xC0,
 	},
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	[pbn_pericom_PI7C9X7951] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7952] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7954] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7958] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {

@@ -5117,6 +5138,25 @@ static struct pci_device_id serial_pci_t
 		0,
 		0, pbn_exar_XR17V8358 },
 	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7951 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7952 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7954 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7958 },
+	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/serial-8250_pci-add-support-for-pericom-pi7c9x795.patch