Skip to contentSkip to conversation

drm/mgag200: Fix error handling paths in fbdev driver

PATCH New Archit Taneja 1 participant 2 messages Sep 17, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/mgag200: Fix error handling paths in fbdev driver

Set up error handling in mgag200_fbdev_init and mgag200fb_create such that they release the things they allocate, rather than relying on someone calling mga_fbdev_destroy.

Based on a patch by Sudip Mukherjee <[email protected]>

Cc Daniel Vetter <[email protected]>
Cc Dave Airlie <[email protected]>
Cc David Airlie <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sudip Mukherjee <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc dri-devel <[email protected]>
---
 drivers/gpu/drm/mgag200/mgag200_fb.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)
drivers/gpu/drm/mgag200/mgag200_fb.c +23 -8
index 87de15e..b35b5b2 100644
@@ -186,17 +186,19 @@ static int mgag200fb_create(struct drm_fb_helper *helper,
 
 	sysram = vmalloc(size);
 	if (!sysram)
-		return -ENOMEM;
+		goto err_sysram;
 
 	info = drm_fb_helper_alloc_fbi(helper);
-	if (IS_ERR(info))
-		return PTR_ERR(info);
+	if (IS_ERR(info)) {
+		ret = PTR_ERR(info);
+		goto err_alloc_fbi;
+	}
 
 	info->par = mfbdev;
 
 	ret = mgag200_framebuffer_init(dev, &mfbdev->mfb, &mode_cmd, gobj);
 	if (ret)
-		return ret;
+		goto err_framebuffer_init;
 
 	mfbdev->sysram = sysram;
 	mfbdev->size = size;
@@ -225,7 +227,17 @@ static int mgag200fb_create(struct drm_fb_helper *helper,
 
 	DRM_DEBUG_KMS("allocated %dx%d\n",
 		      fb->width, fb->height);
+
 	return 0;
+
+err_framebuffer_init:
+	drm_fb_helper_release_fbi(helper);
+err_alloc_fbi:
+	vfree(sysram);
+err_sysram:
+	drm_gem_object_unreference_unlocked(gobj);
+
+	return ret;
 }
 
 static int mga_fbdev_destroy(struct drm_device *dev,
@@ -276,23 +288,26 @@ int mgag200_fbdev_init(struct mga_device *mdev)
 	ret = drm_fb_helper_init(mdev->dev, &mfbdev->helper,
 				 mdev->num_crtc, MGAG200FB_CONN_LIMIT);
 	if (ret)
-		return ret;
+		goto err_fb_helper;
 
 	ret = drm_fb_helper_single_add_all_connectors(&mfbdev->helper);
 	if (ret)
-		goto fini;
+		goto err_fb_setup;
 
 	/* disable all the possible outputs/crtcs before entering KMS mode */
 	drm_helper_disable_unused_functions(mdev->dev);
 
 	ret = drm_fb_helper_initial_config(&mfbdev->helper, bpp_sel);
 	if (ret)
-		goto fini;
+		goto err_fb_setup;
 
 	return 0;
 
-fini:
+err_fb_setup:
 	drm_fb_helper_fini(&mfbdev->helper);
+err_fb_helper:
+	mdev->mfbdev = NULL;
+
 	return ret;
 }
 
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH 2/2 drm/mgag200: Fix driver_load error handling

mgag200_driver_load's error path just calls the drm driver's driver_unload op. It isn't safe to call this because it doesn't handle things well if driver_load fails somewhere mid way.

Replace the call to mgag200_driver_unload with a more finegrained error handling path.

Cc Daniel Vetter <[email protected]>
Cc Dave Airlie <[email protected]>
Cc David Airlie <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sudip Mukherjee <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc dri-devel <[email protected]>
---
 drivers/gpu/drm/mgag200/mgag200_main.c | 36 +++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 16 deletions(-)
drivers/gpu/drm/mgag200/mgag200_main.c +20 -16
index de06388..b1a0f56 100644
@@ -220,7 +220,7 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)
 	}
 	r = mgag200_mm_init(mdev);
 	if (r)
-		goto out;
+		goto err_mm;
 
 	drm_mode_config_init(dev);
 	dev->mode_config.funcs = (void *)&mga_mode_funcs;
@@ -233,7 +233,7 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)
 	r = mgag200_modeset_init(mdev);
 	if (r) {
 		dev_err(&dev->pdev->dev, "Fatal error during modeset init: %d\n", r);
-		goto out;
+		goto err_modeset;
 	}
 
 	/* Make small buffers to store a hardware cursor (double buffered icon updates) */
@@ -241,20 +241,24 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)
 					  &mdev->cursor.pixels_1);
 	mgag200_bo_create(dev, roundup(48*64, PAGE_SIZE), 0, 0,
 					  &mdev->cursor.pixels_2);
-	if (!mdev->cursor.pixels_2 || !mdev->cursor.pixels_1)
-		goto cursor_nospace;
-	mdev->cursor.pixels_current = mdev->cursor.pixels_1;
-	mdev->cursor.pixels_prev = mdev->cursor.pixels_2;
-	goto cursor_done;
- cursor_nospace:
-	mdev->cursor.pixels_1 = NULL;
-	mdev->cursor.pixels_2 = NULL;
-	dev_warn(&dev->pdev->dev, "Could not allocate space for cursors. Not doing hardware cursors.\n");
- cursor_done:
-
-out:
-	if (r)
-		mgag200_driver_unload(dev);
+	if (!mdev->cursor.pixels_2 || !mdev->cursor.pixels_1) {
+		mdev->cursor.pixels_1 = NULL;
+		mdev->cursor.pixels_2 = NULL;
+		dev_warn(&dev->pdev->dev,
+			"Could not allocate space for cursors. Not doing hardware cursors.\n");
+	} else {
+		mdev->cursor.pixels_current = mdev->cursor.pixels_1;
+		mdev->cursor.pixels_prev = mdev->cursor.pixels_2;
+	}
+
+	return 0;
+
+err_modeset:
+	drm_mode_config_cleanup(dev);
+	mgag200_mm_fini(mdev);
+err_mm:
+	dev->dev_private = NULL;
+
 	return r;
 }
 
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel