Staging: rtl8712: Coding style warning fix for block comment
PATCH 13/13 Staging: rtl8712: Coding style warning fix for block comment
This patch is to rtl8712_gp_bitdef.h file that fixes up following warning reported by checkpatch :
-Block comments use a trailing */ on a separate line
--- drivers/staging/rtl8712/rtl8712_gp_bitdef.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/rtl8712/rtl8712_gp_bitdef.h +4 -2
@@ -62,9 +62,11 @@/*----------------------------------------------------------------------------*/ -#define GPIOMUX_EN BIT(3)/* When this bit is set to "1", +#define GPIOMUX_EN BIT(3)/* +* When this bit is set to "1", * GPIO PINs will switch to MAC -* GPIO Function*/ +* GPIO Function +*/ #define GPIOSEL_GPIO 0/* UART or JTAG or pure GPIO*/ #define GPIOSEL_PHYDBG 1/* PHYDBG*/ #define GPIOSEL_BT 2/* BT_coex*/
Signature · 1 line
2.5.2
Quoted 7 lines · Punit Vara
This patch is to
rtl8712_gp_bitdef.hfile that fixes up following warning reported by checkpatch :-Block comments use a trailing */ on a separate line
Signed-off-by Punit Vara <[email protected]>---
I am getting confused. One of your previous patch showed PATCH 5/6, this one shows 13/13, but i am not seeing the other patches of these two series. Is it the problem with my mail filters or you are not sending?
regards
sudip
Quoted 12 lines · Sudip Mukherjee
Quoted 7 lines · Punit Vara
This patch is to
rtl8712_gp_bitdef.hfile that fixes up following warning reported by checkpatch :-Block comments use a trailing */ on a separate line
Signed-off-by Punit Vara <[email protected]>---
I am getting confused. One of your previous patch showed PATCH 5/6, this one shows 13/13, but i am not seeing the other patches of these two series. Is it the problem with my mail filters or you are not sending?
Quoted 7 lines
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I think the sender is not clearing the patch folder before sending a new one. Thus her/his diff program thinks these patches belong to a series.
-Jaime
Quoted 25 lines · Jaime Arrocha
Quoted 15 lines · Sudip Mukherjee
Quoted 8 lines · Punit Vara
This patch is to
rtl8712_gp_bitdef.hfile that fixes up following warning reported by checkpatch :-Block comments use a trailing */ on a separate line
Signed-off-by Punit Vara <[email protected]>---
I am getting confused. One of your previous patch showed PATCH 5/6, this one shows 13/13, but i am not seeing the other patches of these two series. Is it the problem with my mail filters or you are not sending?
Quoted 7 lines
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines
I think the sender is not clearing the patch folder before sending a new one. Thus her/his diff program thinks these patches belong to a series.
-Jaime
Sorry for inconvenience. I have forgot to change the subject of two patches in between. So I have resent the same patches with right subject so please do not consider those patches whose subject represent part of series.
It would be better if someone suggest me how to create independent patch when already I have few patches in directory . Or is it necessary to clear directory every time whenever we work on new problems ?
TIA
Quoted 5 lines · punit vara
Quoted 4 lines · Jaime Arrocha
Quoted 2 lines · Sudip Mukherjee
On Wed, Sep 23, 2015 at 02:03:56AM +0530, Punit Vara wrote:
<snip>
Quoted 6 lines
It would be better if someone suggest me how to create independent patch when already I have few patches in directory . Or is it necessary to clear directory every time whenever we work on new problems ?
I think I have already told you how to use git format-patch to generate single patch when you mailed me offlist.
regards
sudip
Quoted 13 lines · Sudip Mukherjee
Quoted 5 lines · punit vara
Quoted 4 lines · Jaime Arrocha
Quoted 2 lines · Sudip Mukherjee
On Wed, Sep 23, 2015 at 02:03:56AM +0530, Punit Vara wrote:
<snip>
Quoted 6 lines
It would be better if someone suggest me how to create independent patch when already I have few patches in directory . Or is it necessary to clear directory every time whenever we work on new problems ?
Quoted 5 lines
I think I have already told you how to use git format-patch to generate single patch when you mailed me offlist.
regards
sudip
Yes sir I remembered your advice . But it was creating all the time patch starting from 0001-... that is why It was difficult to remember different patches for me so I used to change last number accordingly. Thank you again for remind me .I would follow that from now onward
Quoted 23 lines · punit vara
Quoted 13 lines · Sudip Mukherjee
Quoted 5 lines · punit vara
Quoted 4 lines · Jaime Arrocha
Quoted 2 lines · Sudip Mukherjee
On Wed, Sep 23, 2015 at 02:03:56AM +0530, Punit Vara wrote:
<snip>
Quoted 6 lines
It would be better if someone suggest me how to create independent patch when already I have few patches in directory . Or is it necessary to clear directory every time whenever we work on new problems ?
Quoted 5 lines
I think I have already told you how to use git format-patch to generate single patch when you mailed me offlist.
regards
sudip
Quoted 4 lines
Yes sir I remembered your advice . But it was creating all the time patch starting from 0001-... that is why It was difficult to remember different patches for me so I used to change last number accordingly. Thank you again for remind me .I would follow that from now onward
Don't use -n with git format-patch, the numbers will not be added in the subject.
regards
sudip
Thank you very much sir I will definitely follow that. I have seen so many people fixing patches over here. Now I know process of submitting patches.I am able to fix several patches created by checkpatch.pl . But can you suggest me any driver to fix API or another small TODO task. I have seen so many TODO but confuse where to start . Can you give me some initial idea or though or any driver to fix bugs ? :-)
Quoted 6 lines · punit vara
Thank you very much sir I will definitely follow that. I have seen so many people fixing patches over here. Now I know process of submitting patches.I am able to fix several patches created by checkpatch.pl . But can you suggest me any driver to fix API or another small TODO task. I have seen so many TODO but confuse where to start . Can you give me some initial idea or though or any driver to fix bugs ? :-)
Dear Sudip sir,
I have used git format-patch master..my_local_branch But It also produce numbers in subject of patch.
Now I have used git format-patch master..my_local_branch -N ..It does not generate any number in patch even if you have previous patches
Quoted 9 lines · punit vara
Quoted 6 lines · punit vara
Thank you very much sir I will definitely follow that. I have seen so many people fixing patches over here. Now I know process of submitting patches.I am able to fix several patches created by checkpatch.pl . But can you suggest me any driver to fix API or another small TODO task. I have seen so many TODO but confuse where to start . Can you give me some initial idea or though or any driver to fix bugs ? :-)
Quoted 6 lines
Dear Sudip sir,
I have used git format-patch master..my_local_branch But It also produce numbers in subject of patch.
Now I have used git format-patch master..my_local_branch -N ..It does not generate any number in patch even if you have previous patches
Usually I will not diff between the master and my local branch. I will sync my local branch with the master in the morning and commit my changes there. Now while generating the patch if I want to generate my last patch then I just use git format-patch -1. If you want last 2 patches then use git format-patch -2. If you want to have them in series with the numbering in the subject use git format-patch -2 -n. And please dont use "sir".
regards
sudip
Quoted 24 lines · Sudip Mukherjee
Quoted 9 lines · punit vara
Quoted 6 lines · punit vara
Thank you very much sir I will definitely follow that. I have seen so many people fixing patches over here. Now I know process of submitting patches.I am able to fix several patches created by checkpatch.pl . But can you suggest me any driver to fix API or another small TODO task. I have seen so many TODO but confuse where to start . Can you give me some initial idea or though or any driver to fix bugs ? :-)
Quoted 6 lines
Dear Sudip sir,
I have used git format-patch master..my_local_branch But It also produce numbers in subject of patch.
Now I have used git format-patch master..my_local_branch -N ..It does not generate any number in patch even if you have previous patchesUsually I will not diff between the master and my local branch. I will sync my local branch with the master in the morning and commit my changes there. Now while generating the patch if I want to generate my last patch then I just use git format-patch -1. If you want last 2 patches then use git format-patch -2. If you want to have them in series with the numbering in the subject use git format-patch -2 -n. And please dont use "sir".
Quoted 2 lines
regards
sudip
Thank you for sharing.