How to create and install a library in yocto -- Hello Library
Hello to all,
I have searching for a way to include a library-only in yocto. I found couple links with suggestions but I was unsuccessful in the to package it in the final image. Reading the yocto documentation, I see a paragraph mentioning about static libraries but there is no examples.
I will try to be precise with the hopes to find help to tackle this issue.
NOTE: Couple steps like creating a LICENSE file, crate the layer and update the local.conf file are omitted
===============================
The problem:
- Creating a library that it is desired to be part of the final image (for example core-image-base, core-image-sato). No application, only a library
==============================
Test scenario:
Let's say that we desire to create a simple library called simple lib.
The source code is as follows (taken from this link [http://www.adp-gmbh.ch/cpp/gcc/create_lib.html], copied here just for convenience)
calc_mean.c
//#include <stdio.h>
double mean(double a, double b) {
return (a+b) / 2;
}
calc_mean.h
double mean(double, double);
Now we want to create a recipe that can compile, create a library and can be included in the final image (let's assume core-image-base)
============================
RECIPE
Recipe name => simplelib_0.1.0.bb
===========================
DESCRIPTION = "Simple Library on yocto"
LICENSE = "GPLv2"LIC_FILES_CHKSUM = "file://LICENSE;md5=c0b0999e102092552f1dfe93fb9b0068"
PR = "r0"SRC_URI = "file://simplelib.zip"
S = "${WORKDIR}/simplelib/"
do_compile(){
${CC} -c calc_mean.c -o calc_mean.o
${AR} rcs libmean.a calc_mean.o
}do_install{
install -d ${D}${libdir}
install -m 0644 libmean.a ${D}${libdir}
}=====================
Test results for RECIPE:
$ bitbake simplelib
RUNS without any problem. The files generated are shown below
├── configure.sstate ├── deploy-ipks │ └── cortexa8hf-vfp-neon │ ├── simplelib-dbg_0.1.0-r0_cortexa8hf-vfp-neon.ipk │ ├── simplelib-dev_0.1.0-r0_cortexa8hf-vfp-neon.ipk │ └── simplelib-staticdev_0.1.0-r0_cortexa8hf-vfp-neon.ipk ├── image │ └── usr │ └── lib │ └── libmean.a ├── license-destdir │ └── simplelib │ ├── generic_GPLv2 │ └── LICENSE ├── package │ └── usr │ └── lib │ └── libmean.a ├── packages-split │ ├── simplelib │ ├── simplelib-dbg │ ├── simplelib-dev │ ├── simplelib-doc │ ├── simplelib-locale │ └── simplelib-staticdev │ └── usr │ └── lib │ └── libmean.a ├── pkgdata │ ├── runtime │ │ ├── simplelib │ │ ├── simplelib-dbg │ │ ├── simplelib-dbg.packaged │ │ ├── simplelib-dev │ │ ├── simplelib-dev.packaged │ │ ├── simplelib-doc │ │ ├── simplelib-locale │ │ ├── simplelib-staticdev │ │ └── simplelib-staticdev.packaged │ ├── runtime-reverse │ │ ├── simplelib-dbg -> ../runtime/simplelib-dbg │ │ ├── simplelib-dev -> ../runtime/simplelib-dev │ │ └── simplelib-staticdev -> ../runtime/simplelib-staticdev │ ├── runtime-rprovides │ ├── shlibs2 │ └── simplelib ├── pseudo │ ├── files.db │ ├── logs.db │ ├── pseudo.lock │ ├── pseudo.log │ ├── pseudo.pid │ └── pseudo.socket ├── simplelib │ ├── calc_mean.c │ ├── calc_mean.h │ ├── calc_mean.o │ ├── libmean.a │ └── LICENSE ├── sysroot-destdir │ ├── sysroot-providers │ │ └── simplelib │ └── usr │ └── lib │ └── libmean.a
===============
Test result to include library in the image
$ bitbake core-image-base
FAILS,
* opkg_install_cmd: Cannot install package simplelib.
ERROR: Function failed: do_rootfs
==============
TRY ONE,
Change the recipe and add RDEPENDS_${PN}-dev = "" as suggested by https://lists.yoctoproject.org/pipermail/yocto/2014-September/021676.html
FAILS, same error
* opkg_install_cmd: Cannot install package simplelib.
=============
TRY TWO
Modify recipe adding below lines (based on http://stackoverflow.com/questions/28792597/how-to-add-a-new-library-using-yocto)
PACKAGES = "${PN} ${PN}-dev ${PN}-dbg ${PN}-staticdev"
FILES_${PN} = " \
${libdir}/simplelib/ \"
FAILS, same error
* opkg_install_cmd: Cannot install package simplelib.
===============
I am sure that it is something simple and common that many have done in the past but unfortunately I can not find an example on how to do it. Hope somebody could provide a hint on how to fix this problem.
Thanks
Quoted 88 lines · Simon Castillo
Hello to all,
I have searching for a way to include a library-only in yocto. I found couple links with suggestions but I was unsuccessful in the to package it in the final image. Reading the yocto documentation, I see a paragraph mentioning about static libraries but there is no examples.
I will try to be precise with the hopes to find help to tackle this issue.
NOTE: Couple steps like creating a LICENSE file, crate the layer and
update the local.conf file are omitted===============================
The problem:
- Creating a library that it is desired to be part of the final image (for example core-image-base, core-image-sato). No application, only a library
==============================
Test scenario:Let's say that we desire to create a simple library called simple lib.
The source code is as follows (taken from this link [
http://www.adp-gmbh.ch/cpp/gcc/create_lib.html], copied here just for convenience)
calc_mean.c
//#include <stdio.h>double
mean(double a, double b){
return (a+b) / 2;
}
calc_mean.h
doublemean(double, double);Now we want to create a recipe that can compile, create a library and can be included in the final image (let's assume core-image-base)
============================
RECIPE
Recipe name => simplelib_0.1.0.bb
===========================DESCRIPTION = "Simple Library on yocto"
LICENSE = "GPLv2"LIC_FILES_CHKSUM= "file://LICENSE;md5=c0b0999e102092552f1dfe93fb9b0068"PR = "r0"
SRC_URI= "file://simplelib.zip"S = "${WORKDIR}/simplelib/"
do_compile(){ ${CC} -c calc_mean.c -o calc_mean.o ${AR} rcs libmean.a calc_mean.o }do_install{ install -d ${D}${libdir} install -m 0644 libmean.a ${D}${libdir} }=====================
Test results for RECIPE:$ bitbake simplelibRUNS without any problem. The files generated are shown below
├── configure.sstate ├── deploy-ipks │ └── cortexa8hf-vfp-neon │ ├── simplelib-dbg_0.1.0-r0_cortexa8hf-vfp-neon.ipk │ ├── simplelib-dev_0.1.0-r0_cortexa8hf-vfp-neon.ipk │ └── simplelib-staticdev_0.1.0-r0_cortexa8hf-vfp-neon.ipk ├── image │ └── usr │ └── lib │ └── libmean.a ├── license-destdir │ └── simplelib │ ├── generic_GPLv2 │ └── LICENSE ├── package │ └── usr │ └── lib │ └── libmean.a ├── packages-split │ ├── simplelib
Quoted 9 lines
│ ├── simplelib-dbg │ ├── simplelib-dev │ ├── simplelib-doc │ ├── simplelib-locale │ └── simplelib-staticdev │ └── usr │ └── lib │ └── libmean.a
├── pkgdata > │ ├── runtime > │ │ ├── simplelib > │ │ ├── simplelib-dbg > │ │ ├── simplelib-dbg.packaged > │ │ ├── simplelib-dev > │ │ ├── simplelib-dev.packaged > │ │ ├── simplelib-doc > │ │ ├── simplelib-locale > │ │ ├── simplelib-staticdev > │ │ └── simplelib-staticdev.packaged > │ ├── runtime-reverse > │ │ ├── simplelib-dbg -> ../runtime/simplelib-dbg > │ │ ├── simplelib-dev -> ../runtime/simplelib-dev > │ │ └── simplelib-staticdev -> ../runtime/simplelib-staticdev > │ ├── runtime-rprovides > │ ├── shlibs2 > │ └── simplelib > ├── pseudo > │ ├── files.db > │ ├── logs.db > │ ├── pseudo.lock > │ ├── pseudo.log > │ ├── pseudo.pid > │ └── pseudo.socket > ├── simplelib > │ ├── calc_mean.c > │ ├── calc_mean.h > │ ├── calc_mean.o > │ ├── libmean.a > │ └── LICENSE > ├── sysroot-destdir > │ ├── sysroot-providers > │ │ └── simplelib > │ └── usr > │ └── lib > │ └── libmean.a
Quoted 12 lines
===============
Test result to include library in the image$ bitbake core-image-baseFAILS,
*
opkg_install_cmd: Cannot install package simplelib.ERROR: Function failed:
do_rootfs
Quoted 9 lines
==============
TRY ONE,Change the recipe and add RDEPENDS_${PN}-dev = "" as suggested by
https://lists.yoctoproject.org/pipermail/yocto/2014-September/021676.htmlFAILS, same error
*opkg_install_cmd: Cannot install package simplelib.
This really should help: your problem is probably that the actual simplelib package is not created (because there are no files to put into it), but the -dev package still RDEPENDS on it by default. The log file might give you more details though. "grep RDEPENDS pkgdata/runtime/*" in work directory should show what the RDEPENDS are.
How are you adding the library to your image? You should be adding the package "simplelib-staticdev" to it (assuming you really only want a static .a).
Quoted 7 lines
=============
TRY TWOModify recipe adding below lines (based on
http://stackoverflow.com/questions/28792597/how-to-add-a-new-library-using-yocto
)
Quoted 5 lines
PACKAGES = "${PN} ${PN}-dev ${PN}-dbg ${PN}-staticdev"
FILES_${PN} = " \ ${libdir}/simplelib/ \"
FAILS, same error
Quoted 3 lines
*
opkg_install_cmd: Cannot install package simplelib.
===============
This SO question was fixing a slightly different problem: adding any files to FILES_${PN} would solve your problem as well (because the ${PN} package would then exist) but the files you refer to do not exist so nothing is added...
I am sure that it is something simple and common that many have done in the
Quoted 3 lines
past but unfortunately I can not find an example on how to do it. Hope somebody could provide a hint on how to fix this problem.
Hope that helps,
Jussi
Hi Jussie,
Thanks for your help and hints. I was able to find a solution.
For those interested, the recipe is shown below:
============================
RECIPE
Recipe name => simplelib_0.1.1.bb
===========================
DESCRIPTION = "Simple Library on yocto" LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=c0b0999e102092552f1dfe93fb9b0068"
PR = "r0"
SRC_URI = "file://simplelib.zip"
S = "${WORKDIR}/simplelib/"
PACKAGES = "${PN} ${PN}-dev ${PN}-dbg ${PN}-staticdev"
RDEPENDS_${PN}-staticdev = ""
RDEPENDS_${PN}-dev = ""
RDEPENDS_${PN}-dbg = ""
do_compile(){
${CC} -c calc_mean.c -o calc_mean.o
${AR} rcs libmean.a calc_mean.o}
do_install{
install -d ${D}${libdir}
install -m 0644 libmean.a ${D}${libdir}}
=====================
At local.conf add the library as
IMAGE_INSTALL_append = "simplelib-staticdev"
=====================
Again, thanks to Jussie for the help.
Regards!
--------------------------------------------
On Wed, 9/30/15, Jussi Kukkonen <[email protected]> wrote:
Subject: Re: [yocto] How to create and install a library in yocto -- Hello Library
To: "Simon Castillo" <[email protected]>
Cc: "Yocto Project" <[email protected]>
Date: Wednesday, September 30, 2015, 5:08 AM
On 30
September 2015 at 04:28, Simon Castillo <[email protected]> wrote:
Hello
to all,
I have searching for a way to include a library-only in yocto. I found couple links with suggestions but I was unsuccessful in the to package it in the final image. Reading the yocto documentation, I see a paragraph mentioning about static libraries but there is no examples.
I will try to be precise with the hopes to find help to tackle this issue.
NOTE: Couple steps like creating a LICENSE file, crate the layer and update the local.conf file are omitted
===============================
The problem:
- Creating a library that it is desired to be part of the final image (for example core-image-base, core-image-sato). No application, only a library
==============================
Test scenario:
Let's say that we desire to create a simple library called simple lib.
The source code is as follows (taken from this link [http://www.adp-gmbh.ch/cpp/gcc/create_lib.html],
copied here just for convenience)
calc_mean.c
//#include <stdio.h>
double mean(double a, double b) {
return (a+b) / 2;
}
calc_mean.h
double mean(double, double);
Now we want to create a recipe that can compile, create a library and can be included in the final image (let's assume core-image-base)
============================
RECIPE
Recipe name => simplelib_0.1.0.bb
===========================
DESCRIPTION = "Simple Library on yocto"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=c0b0999e102092552f1dfe93fb9b0068"
PR = "r0"
SRC_URI = "file://simplelib.zip"
S = "${WORKDIR}/simplelib/"
do_compile(){
${CC} -c calc_mean.c -o calc_mean.o
${AR} rcs libmean.a calc_mean.o
}
do_install{
install -d ${D}${libdir}
install -m 0644 libmean.a ${D}${libdir}
}
=====================
Test results for RECIPE:
$ bitbake simplelib
RUNS without any problem. The files generated are shown below
├── configure.sstate
├── deploy-ipks
│ └── cortexa8hf-vfp-neon
│ ├──
simplelib-dbg_0.1.0-r0_cortexa8hf-vfp-neon.ipk
│ ├──
simplelib-dev_0.1.0-r0_cortexa8hf-vfp-neon.ipk
│ └── simplelib-staticdev_0.1.0-r0_cortexa8hf-vfp-neon.ipk
├── image
│ └── usr
│ └── lib
│ └── libmean.a
├── license-destdir
│ └── simplelib
│ ├── generic_GPLv2
│ └── LICENSE
├── package
│ └── usr
│ └── lib
│ └── libmean.a
├── packages-split
│ ├── simplelib
│ ├── simplelib-dbg
│ ├── simplelib-dev
│ ├── simplelib-doc
│ ├── simplelib-locale
│ └── simplelib-staticdev
│ └── usr
│ └── lib
│ └── libmean.a
├──
pkgdata
│ ├── runtime
│ │ ├── simplelib
│ │ ├── simplelib-dbg
│ │ ├── simplelib-dbg.packaged
│ │ ├── simplelib-dev
│ │ ├── simplelib-dev.packaged
│ │ ├── simplelib-doc
│ │ ├── simplelib-locale
│ │ ├── simplelib-staticdev
│ │ └── simplelib-staticdev.packaged
│ ├── runtime-reverse
│ │ ├── simplelib-dbg ->
../runtime/simplelib-dbg
│ │ ├── simplelib-dev ->
../runtime/simplelib-dev
│ │ └── simplelib-staticdev ->
../runtime/simplelib-staticdev
│ ├── runtime-rprovides
│ ├── shlibs2
│ └── simplelib
├── pseudo
│ ├── files.db
│ ├── logs.db
│ ├── pseudo.lock
│ ├── pseudo.log
│ ├── pseudo.pid
│ └── pseudo.socket
├── simplelib
│ ├── calc_mean.c
│ ├── calc_mean.h
│ ├── calc_mean.o
│ ├── libmean.a
│ └── LICENSE
├── sysroot-destdir
│ ├── sysroot-providers
│ │ └── simplelib
│ └── usr
│ └── lib
│ └── libmean.a
===============
Test result to include library in the image
$ bitbake core-image-base
FAILS,
* opkg_install_cmd: Cannot install package simplelib.
ERROR: Function failed: do_rootfs
==============
TRY ONE,
Change the recipe and add RDEPENDS_${PN}-dev =
"" as suggested by https://lists.yoctoproject.org/pipermail/yocto/2014-September/021676.html
FAILS, same error
* opkg_install_cmd: Cannot install package simplelib.
This really
should help: your problem is probably that the actual simplelib package is not created (because there are no files to put into it), but the -dev package still RDEPENDS on it by default. The log file might give you more details though. "grep RDEPENDS pkgdata/runtime/*" in work directory should show what the RDEPENDS are.
How are you adding the library to
your image? You should be adding the package "simplelib-staticdev" to it (assuming you really only want a static .a).
=============
TRY TWO
Modify recipe adding below lines (based on http://stackoverflow.com/questions/28792597/how-to-add-a-new-library-using-yocto)
PACKAGES = "${PN} ${PN}-dev ${PN}-dbg
${PN}-staticdev"
FILES_${PN} = " \
${libdir}/simplelib/ \
"
FAILS, same error
* opkg_install_cmd: Cannot install package simplelib.
===============
This SO question was fixing a
slightly different problem: adding any files to FILES_${PN} would solve your problem as well (because the ${PN} package would then exist) but the files you refer to do not exist so nothing is added...
I am sure that it is something
simple and common that many have done in the past but unfortunately I can not find an example on how to do it. Hope somebody could provide a hint on how to fix this problem.
Hope
that helps,
Jussi