Patch "ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again" has been added to the 4.1-stable tree

This is a note to let you know that I've just added the patch titled

ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     arm-dts-omap3-beagle-make-i2c3-ddc-and-tfp410-gpio-work-again.patch

and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Carl Frederik Werner <[email protected]>
Date: Wed, 2 Sep 2015 10:07:57 +0900
Subject: ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

From: Carl Frederik Werner <[email protected]>

commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 upstream.

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message:
omap_i2c 48060000.i2c: controller timed out

---
 arch/arm/boot/dts/omap3-beagle.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -202,7 +202,7 @@
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+			0x196 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/arm-dts-omap3-beagle-make-i2c3-ddc-and-tfp410-gpio-work-again.patch