Patch "dts: imx51: fix sd card gpio polarity specified in device tree" has been added to the 4.1-stable tree

This is a note to let you know that I've just added the patch titled

dts: imx51: fix sd card gpio polarity specified in device tree

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
dts-imx51-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Dong Aisheng <[email protected]>
Date: Wed, 22 Jul 2015 20:53:00 +0800
Subject: dts: imx51: fix sd card gpio polarity specified in device tree

From: Dong Aisheng <[email protected]>

commit aca45c0e95dad1c4ba4d38da192756b0e10cbbbd upstream.

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse().

---
 arch/arm/boot/dts/imx51-apf51dev.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/dts-imx51-fix-sd-card-gpio-polarity-specified-in-device-tree.patch queue-4.1/dts-imx6-fix-sd-card-gpio-polarity-specified-in-device-tree.patch queue-4.1/dts-imx25-fix-sd-card-gpio-polarity-specified-in-device-tree.patch queue-4.1/dts-imx53-fix-sd-card-gpio-polarity-specified-in-device-tree.patch queue-4.1/mmc-sdhci-esdhc-imx-fix-cd-regression-for-dt-platform.patch