Patch "serial: 8250: add uart_config entry for PORT_RT2880" has been added to the 4.2-stable tree

This is a note to let you know that I've just added the patch titled

serial: 8250: add uart_config entry for PORT_RT2880

to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     serial-8250-add-uart_config-entry-for-port_rt2880.patch

and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Mans Rullgard <[email protected]>
Date: Fri, 2 Oct 2015 17:50:31 +0100
Subject: serial: 8250: add uart_config entry for PORT_RT2880

From: Mans Rullgard <[email protected]>

commit 3c5a0357fdb3a9116a48dbdb0abb91fd23fbff80 upstream.

This adds an entry to the uart_config table for PORT_RT2880 enabling rx/tx FIFOs. The UART is actually a Palmchip BK-3103 which is found in several devices from Alchemy/RMI, Ralink, and Sigma Designs.

---
 drivers/tty/serial/8250/8250_core.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -326,6 +326,14 @@ configured less than Maximum supported f
 				  UART_FCR7_64BYTE,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_RT2880] = {
+		.name		= "Palmchip BK-3103",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */

Patches currently in stable-queue which might be from [email protected] are

queue-4.2/serial-8250-add-uart_config-entry-for-port_rt2880.patch