Skip to contentSkip to conversation

perf, tools, stat: Implement --metric-only mode

PATCH In review Andi Kleen 2 participants 2 messages Oct 24, 2015 – Oct 27, 2015 perf events

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/1 perf, tools, stat: Implement --metric-only mode

From: Andi Kleen <[email protected]>

Add a new mode to only print metrics. Sometimes we don't care about the raw values, just want the computed metrics. This allows more compact printing, so with -I each sample is only a single line. This also allows easier plotting and processing with other tools.

The main target is with using --topdown, but it also works with -T and standard perf stat. A few metrics are not supported.

To avoiding having to hardcode all the metrics in the code it uses a two pass approach: first compute dummy metrics and only print the headers in the print_metric callback. Then use the callback to print the actual values. There are some additional changes in the stat printout code to handle all metrics being on a single line.

Example:

% perf stat -a -I 1000 --metric-only

     1.000604977 frontend cycles idle     backend cycles idle      insn per cycle           stalled cycles per insn  branch-misses of all branches
     1.000604977                                                    0.76                                             2.35%
     2.000924680                                                    0.72                                             2.34%
     3.001139592                                                    0.76                                             2.57%
     4.001358452                                                    0.73                                             2.44%

The output is fairly wide, but that's a trade off for the concise format.

---
 tools/perf/Documentation/perf-stat.txt |   4 +
 tools/perf/builtin-stat.c              | 201 +++++++++++++++++++++++++++++++--
 2 files changed, 196 insertions(+), 9 deletions(-)
tools/perf/Documentation/perf-stat.txt +4 -0
index 079b141..58296e7 100644
@@ -132,6 +132,10 @@ Print count deltas every N milliseconds (minimum: 10ms)
 The overhead percentage could be high in some cases, for instance with small, sub 100ms intervals.  Use with caution.
 	example: 'perf stat -I 1000 -e cycles -a sleep 5'
 
+--metric-only::
+Only print computed metrics. Print them in a single line.
+Don't show any raw values. Not supported with -A or --per-thread.
+
 --per-socket::
 Aggregate counts per processor socket for system-wide mode measurements.  This
 is a useful mode to detect imbalance between sockets.  To enable this mode,
tools/perf/builtin-stat.c +192 -9

308 lines not on this page · raw message

Signature · 1 line
2.4.3
#1 lore raw

Here's a v2 that fixes a problem in --per-core mode.

---

Add a new mode to only print metrics. Sometimes we don't care about the raw values, just want the computed metrics. This allows more compact printing, so with -I each sample is only a single line. This also allows easier plotting and processing with other tools.

The main target is with using --topdown, but it also works with -T and standard perf stat. A few metrics are not supported.

To avoiding having to hardcode all the metrics in the code it uses a two pass approach: first compute dummy metrics and only print the headers in the print_metric callback. Then use the callback to print the actual values. There are some additional changes in the stat printout code to handle all metrics being on a single line.

Example:

% perf stat -a -I 1000 --metric-only

     1.000604977 frontend cycles idle     backend cycles idle      insn per cycle           stalled cycles per insn  branch-misses of all branches
     1.000604977                                                    0.76                                             2.35%
     2.000924680                                                    0.72                                             2.34%
     3.001139592                                                    0.76                                             2.57%
     4.001358452                                                    0.73                                             2.44%

The output is fairly wide, but that's a trade off for the concise format.

v2: Fix --per-socket/core extra prefix printing.

---
 tools/perf/Documentation/perf-stat.txt |   4 +
 tools/perf/builtin-stat.c              | 201 +++++++++++++++++++++++++++++++--
 2 files changed, 196 insertions(+), 9 deletions(-)
tools/perf/Documentation/perf-stat.txt +4 -0
index 079b141..58296e7 100644
@@ -132,6 +132,10 @@ Print count deltas every N milliseconds (minimum: 10ms)
 The overhead percentage could be high in some cases, for instance with small, sub 100ms intervals.  Use with caution.
 	example: 'perf stat -I 1000 -e cycles -a sleep 5'
 
+--metric-only::
+Only print computed metrics. Print them in a single line.
+Don't show any raw values. Not supported with -A or --per-thread.
+
 --per-socket::
 Aggregate counts per processor socket for system-wide mode measurements.  This
 is a useful mode to detect imbalance between sockets.  To enable this mode,
tools/perf/builtin-stat.c +192 -9

308 lines not on this page · raw message

Signature · 1 line
2.1.4