Patch "ARM: dts: berlin: change BG2Q's USB PHY compatible" has been added to the 4.2-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
ARM: dts: berlin: change BG2Q's USB PHY compatible
to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-berlin-change-bg2q-s-usb-phy-compatible.patch
and it can be found in the queue-4.2 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
1f744fd317dc55cadd7132c57c499e3117aea01dMon Sep 17 00:00:00 2001
From: Thomas Hebb <[email protected]>
Date: Thu, 1 Oct 2015 21:00:00 +0200
Subject: ARM: dts: berlin: change BG2Q's USB PHY compatible
From: Thomas Hebb <[email protected]>
commit 1f744fd317dc55cadd7132c57c499e3117aea01d upstream.
Currently, BG2Q shares a compatible with BG2. This is incorrect, since BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect that.
--- arch/arm/boot/dts/berlin2q.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/berlin2q.dtsi +3 -3
@@ -152,7 +152,7 @@ }; usb_phy2: phy@a2f400 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 14>;
@@ -170,7 +170,7 @@ }; usb_phy0: phy@b74000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 12>;
@@ -178,7 +178,7 @@ }; usb_phy1: phy@b78000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 13>;
Patches currently in stable-queue which might be from [email protected] are
queue-4.2/arm-dts-berlin-change-bg2q-s-usb-phy-compatible.patch