Skip to contentSkip to conversation

goldfish: fix goldfish_pipe driver BUG

PATCH New yalin wang 2 participants 2 messages Nov 6, 2015

lore
Share & tools
lore

yalin wang

author
#0 lore raw

PATCH 1/1 goldfish: fix goldfish_pipe driver BUG

goldfish_pipe_read_write() should pass the buffer's physical address to qemu, so that host can copy access data correctly, currently, the drier write a virtual address into address register, host can not get correct data, then adbd daemon can not work in guest. Also I comment off access_with_param() function, seems not used, we don't need use this function in goldfish_pipe_read_write().

---
 drivers/platform/goldfish/goldfish_pipe.c | 56 +++++++++++++++++++------------
 1 file changed, 35 insertions(+), 21 deletions(-)
drivers/platform/goldfish/goldfish_pipe.c +35 -21
index 55b6d7c..bdf6f11 100644
@@ -112,16 +112,27 @@
 #define PIPE_WAKE_READ         (1 << 1)  /* pipe can now be read from */
 #define PIPE_WAKE_WRITE        (1 << 2)  /* pipe can now be written to */
 
+#ifdef CONFIG_64BIT
 struct access_params {
-	unsigned long channel;
-	u32 size;
-	unsigned long address;
-	u32 cmd;
-	u32 result;
+	uint64_t channel;   /* 0x00 */
+	uint32_t size;      /* 0x08 */
+	uint64_t address;   /* 0x0c */
+	uint32_t cmd;       /* 0x14 */
+	uint32_t result;    /* 0x18 */
 	/* reserved for future extension */
-	u32 flags;
+	uint32_t flags;     /* 0x1c */
 };
-
+#else
+struct access_params {
+	uint32_t channel;   /* 0x00 */
+	uint32_t size;      /* 0x04 */
+	uint32_t address;   /* 0x08 */
+	uint32_t cmd;       /* 0x0c */
+	uint32_t result;    /* 0x10 */
+	/* reserved for future extension */
+	uint32_t flags;     /* 0x14 */
+};
+#endif
 /* The global driver data. Holds a reference to the i/o page used to
  * communicate with the emulator, and a wake queue for blocked tasks
  * waiting to be awoken.
@@ -237,6 +248,7 @@ static int setup_access_params_addr(struct platform_device *pdev,
 		return -1;
 }
 
+#if 0
 /* A value that will not be set by qemu emulator */
 #define INITIAL_BATCH_RESULT (0xdeadbeaf)
 static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
@@ -263,6 +275,7 @@ static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
 	*status = aps->result;
 	return 0;
 }
+#endif
 
 /* This function is used for both reading from and writing to a given
  * pipe.
@@ -304,6 +317,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 								 : address_end;
 		unsigned long  avail    = next - address;
 		int status, wakeBit;
+		struct page *page;
+		phys_addr_t phys_addr;
 
 		/* Ensure that the corresponding page is properly mapped */
 		/* FIXME: this isn't safe or sufficient - use get_user_pages */
@@ -323,23 +338,22 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 				break;
 			}
 		}
-
+		if (get_user_pages_unlocked(current, current->active_mm,
+					address, 1, !is_write, 0, &page) != 1)
+			return -EINVAL;
+		phys_addr = page_to_phys(page) + offset_in_page(address);
 		/* Now, try to transfer the bytes in the current page */
 		spin_lock_irqsave(&dev->lock, irq_flags);
-		if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
-				address, avail, pipe, &status)) {
-			gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
-				     dev->base + PIPE_REG_CHANNEL_HIGH);
-			writel(avail, dev->base + PIPE_REG_SIZE);
-			gf_write_ptr((void *)address,
-				     dev->base + PIPE_REG_ADDRESS,
-				     dev->base + PIPE_REG_ADDRESS_HIGH);
-			writel(CMD_WRITE_BUFFER + cmd_offset,
-					dev->base + PIPE_REG_COMMAND);
-			status = readl(dev->base + PIPE_REG_STATUS);
-		}
+		gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
+			     dev->base + PIPE_REG_CHANNEL_HIGH);
+		writel(avail, dev->base + PIPE_REG_SIZE);
+		gf_write_ptr((void *)phys_addr, dev->base + PIPE_REG_ADDRESS,
+			     dev->base + PIPE_REG_ADDRESS_HIGH);
+		writel(CMD_WRITE_BUFFER + cmd_offset,
+				dev->base + PIPE_REG_COMMAND);
+		status = readl(dev->base + PIPE_REG_STATUS);
 		spin_unlock_irqrestore(&dev->lock, irq_flags);
-
+		put_page(page);
 		if (status > 0) { /* Correct transfer */
 			ret += status;
 			address += status;
Signature · 1 line
1.9.1
#1 lore raw
reproduce:

Hi yalin,

[auto build test ERROR on staging/staging-testing] [also build test ERROR on v4.3 next-20151106]

url:    https://github.com/0day-ci/linux/commits/yalin-wang/goldfish-fix-goldfish_pipe-driver-BUG/20151106-235541
config: i386-allmodconfig (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

drivers/platform/goldfish/goldfish_pipe.c: In function 'goldfish_pipe_read_write':

>> drivers/platform/goldfish/goldfish_pipe.c:340:7: error: implicit declaration of function 'get_user_pages_unlocked' [-Werror=implicit-function-declaration]
      if (get_user_pages_unlocked(current, current->active_mm,
          ^
>> drivers/platform/goldfish/goldfish_pipe.c:343:36: error: implicit declaration of function 'offset_in_page' [-Werror=implicit-function-declaration]
      phys_addr = page_to_phys(page) + offset_in_page(address);
                                       ^
>> drivers/platform/goldfish/goldfish_pipe.c:355:3: error: implicit declaration of function 'put_page' [-Werror=implicit-function-declaration]
      put_page(page);
      ^

cc1: some warnings being treated as errors

vim +/get_user_pages_unlocked +340 drivers/platform/goldfish/goldfish_pipe.c

334 if (__put_user(0, (char __user *)address)) {
335 if (!ret)
336 ret = -EFAULT;
337 break;
338 }
339 }

 > 340			if (get_user_pages_unlocked(current, current->active_mm,
   341						address, 1, !is_write, 0, &page) != 1)
   342				return -EINVAL;
 > 343			phys_addr = page_to_phys(page) + offset_in_page(address);
   344			/* Now, try to transfer the bytes in the current page */
   345			spin_lock_irqsave(&dev->lock, irq_flags);
   346			gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
   347				     dev->base + PIPE_REG_CHANNEL_HIGH);
   348			writel(avail, dev->base + PIPE_REG_SIZE);
   349			gf_write_ptr((void *)phys_addr, dev->base + PIPE_REG_ADDRESS,
   350				     dev->base + PIPE_REG_ADDRESS_HIGH);
   351			writel(CMD_WRITE_BUFFER + cmd_offset,
   352					dev->base + PIPE_REG_COMMAND);
   353			status = readl(dev->base + PIPE_REG_STATUS);
   354			spin_unlock_irqrestore(&dev->lock, irq_flags);
 > 355			put_page(page);

356 if (status > 0) { /* Correct transfer */
357 ret += status;
358 address += status;

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation