Skip to contentSkip to conversation

iio: st-accel: add support for lis2dh12

PATCH In review Giuseppe Barba 4 participants 4 messages Nov 12, 2015 – Nov 14, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 iio: st-accel: add support for lis2dh12

This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here:

http://www.st.com/st-web-ui/static/active/en/resource/technical/
document/datasheet/DM00091513.pdf

---
 Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
 drivers/iio/accel/Kconfig                            | 2 +-
 drivers/iio/accel/st_accel.h                         | 1 +
 drivers/iio/accel/st_accel_core.c                    | 1 +
 drivers/iio/accel/st_accel_i2c.c                     | 5 +++++
 drivers/iio/accel/st_accel_spi.c                     | 1 +
 6 files changed, 10 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/st-sensors.txt +1 -0
index d3ccdb1..d4b87cc 100644
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro
drivers/iio/accel/Kconfig +1 -1
index 87487d3..edc29b1 100644
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
drivers/iio/accel/st_accel.h +1 -0
index 468f21f..5d4a189 100644
@@ -27,6 +27,7 @@
 #define LSM303DLM_ACCEL_DEV_NAME	"lsm303dlm_accel"
 #define LSM330_ACCEL_DEV_NAME		"lsm330_accel"
 #define LSM303AGR_ACCEL_DEV_NAME	"lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME		"lis2dh12_accel"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
drivers/iio/accel/st_accel_core.c +1 -0
index dab8b76..9d973f1 100644
@@ -234,6 +234,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			[3] = LSM330DL_ACCEL_DEV_NAME,
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
 			[5] = LSM303AGR_ACCEL_DEV_NAME,
+			[6] = LIS2DH12_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
drivers/iio/accel/st_accel_i2c.c +5 -0
index 8b9cc84..294a32f 100644
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lsm303agr-accel",
 		.data = LSM303AGR_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis2dh12-accel",
+		.data = LIS2DH12_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
 	{ LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
drivers/iio/accel/st_accel_spi.c +1 -0
index 54b61a3..e82bedf 100644
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
 	{ LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
Signature · 1 line
1.9.1
Acked-by on v4 1/1
#1 lore raw

Good for me.

Quoted 101 lines · Giuseppe BARBA

This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here:

http://www.st.com/st-web-ui/static/active/en/resource/technical/
document/datasheet/DM00091513.pdf

---
 Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
 drivers/iio/accel/Kconfig                            | 2 +-
 drivers/iio/accel/st_accel.h                         | 1 +
 drivers/iio/accel/st_accel_core.c                    | 1 +
 drivers/iio/accel/st_accel_i2c.c                     | 5 +++++
 drivers/iio/accel/st_accel_spi.c                     | 1 +
 6 files changed, 10 insertions(+), 1 deletion(-)
(quoted diff) +0 -0

b/Documentation/devicetree/bindings/iio/st-sensors.txt index d3ccdb1..d4b87cc 100644

Documentation/devicetree/bindings/iio/st-sensors.txt +1 -0
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro
drivers/iio/accel/Kconfig +1 -1
index 87487d3..edc29b1 100644
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
drivers/iio/accel/st_accel.h +1 -0
index 468f21f..5d4a189 100644
@@ -27,6 +27,7 @@
 #define LSM303DLM_ACCEL_DEV_NAME	"lsm303dlm_accel"
 #define LSM330_ACCEL_DEV_NAME		"lsm330_accel"
 #define LSM303AGR_ACCEL_DEV_NAME	"lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME		"lis2dh12_accel"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
(quoted diff) +0 -0

b/drivers/iio/accel/st_accel_core.c index dab8b76..9d973f1 100644

drivers/iio/accel/st_accel_core.c +1 -0
@@ -234,6 +234,7 @@ static const struct st_sensor_settings
 st_accel_sensors_settings[] = { [3] = LSM330DL_ACCEL_DEV_NAME,
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
 			[5] = LSM303AGR_ACCEL_DEV_NAME,
+			[6] = LIS2DH12_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
(quoted diff) +0 -0

b/drivers/iio/accel/st_accel_i2c.c index 8b9cc84..294a32f 100644

drivers/iio/accel/st_accel_i2c.c +5 -0
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lsm303agr-accel",
 		.data = LSM303AGR_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis2dh12-accel",
+		.data = LIS2DH12_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] =
 { { LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
(quoted diff) +0 -0

b/drivers/iio/accel/st_accel_spi.c index 54b61a3..e82bedf 100644

drivers/iio/accel/st_accel_spi.c +1 -0
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
 	{ LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
Acked-by on v4 1/1
#2 lore raw
In reply to Giuseppe Barba
Quoted 7 lines · Giuseppe Barba

This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here:

http://www.st.com/st-web-ui/static/active/en/resource/technical/
document/datasheet/DM00091513.pdf

Quoted 96 lines
---
 Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
 drivers/iio/accel/Kconfig                            | 2 +-
 drivers/iio/accel/st_accel.h                         | 1 +
 drivers/iio/accel/st_accel_core.c                    | 1 +
 drivers/iio/accel/st_accel_i2c.c                     | 5 +++++
 drivers/iio/accel/st_accel_spi.c                     | 1 +
 6 files changed, 10 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/st-sensors.txt +1 -0
index d3ccdb1..d4b87cc 100644
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro
drivers/iio/accel/Kconfig +1 -1
index 87487d3..edc29b1 100644
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
        help
          Say yes here to build support for STMicroelectronics accelerometers:
          LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-         LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+         LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
 
          This driver can also be built as a module. If so, these modules
          will be created:
drivers/iio/accel/st_accel.h +1 -0
index 468f21f..5d4a189 100644
@@ -27,6 +27,7 @@
 #define LSM303DLM_ACCEL_DEV_NAME       "lsm303dlm_accel"
 #define LSM330_ACCEL_DEV_NAME          "lsm330_accel"
 #define LSM303AGR_ACCEL_DEV_NAME       "lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME                "lis2dh12_accel"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
drivers/iio/accel/st_accel_core.c +1 -0
index dab8b76..9d973f1 100644
@@ -234,6 +234,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        [3] = LSM330DL_ACCEL_DEV_NAME,
                        [4] = LSM330DLC_ACCEL_DEV_NAME,
                        [5] = LSM303AGR_ACCEL_DEV_NAME,
+                       [6] = LIS2DH12_ACCEL_DEV_NAME,
                },
                .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
                .odr = {
drivers/iio/accel/st_accel_i2c.c +5 -0
index 8b9cc84..294a32f 100644
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
                .compatible = "st,lsm303agr-accel",
                .data = LSM303AGR_ACCEL_DEV_NAME,
        },
+       {
+               .compatible = "st,lis2dh12-accel",
+               .data = LIS2DH12_ACCEL_DEV_NAME,
+       },
        {},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
        { LSM303DLM_ACCEL_DEV_NAME },
        { LSM330_ACCEL_DEV_NAME },
        { LSM303AGR_ACCEL_DEV_NAME },
+       { LIS2DH12_ACCEL_DEV_NAME },
        {},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
drivers/iio/accel/st_accel_spi.c +1 -1
index 54b61a3..e82bedf 100644
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
        { LSM303DLM_ACCEL_DEV_NAME },
        { LSM330_ACCEL_DEV_NAME },
        { LSM303AGR_ACCEL_DEV_NAME },
+       { LIS2DH12_ACCEL_DEV_NAME },
        {},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
--

1.9.1

maintainer
#3 lore raw
Quoted 10 lines · Daniel Baluta
Quoted 7 lines · Giuseppe Barba

This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here:

http://www.st.com/st-web-ui/static/active/en/resource/technical/
document/datasheet/DM00091513.pdf

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play.

Quoted 102 lines
Quoted 95 lines
---
 Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
 drivers/iio/accel/Kconfig                            | 2 +-
 drivers/iio/accel/st_accel.h                         | 1 +
 drivers/iio/accel/st_accel_core.c                    | 1 +
 drivers/iio/accel/st_accel_i2c.c                     | 5 +++++
 drivers/iio/accel/st_accel_spi.c                     | 1 +
 6 files changed, 10 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/st-sensors.txt +1 -0
index d3ccdb1..d4b87cc 100644
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro
drivers/iio/accel/Kconfig +1 -1
index 87487d3..edc29b1 100644
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
        help
          Say yes here to build support for STMicroelectronics accelerometers:
          LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-         LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+         LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
 
          This driver can also be built as a module. If so, these modules
          will be created:
drivers/iio/accel/st_accel.h +1 -0
index 468f21f..5d4a189 100644
@@ -27,6 +27,7 @@
 #define LSM303DLM_ACCEL_DEV_NAME       "lsm303dlm_accel"
 #define LSM330_ACCEL_DEV_NAME          "lsm330_accel"
 #define LSM303AGR_ACCEL_DEV_NAME       "lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME                "lis2dh12_accel"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
drivers/iio/accel/st_accel_core.c +1 -0
index dab8b76..9d973f1 100644
@@ -234,6 +234,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        [3] = LSM330DL_ACCEL_DEV_NAME,
                        [4] = LSM330DLC_ACCEL_DEV_NAME,
                        [5] = LSM303AGR_ACCEL_DEV_NAME,
+                       [6] = LIS2DH12_ACCEL_DEV_NAME,
                },
                .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
                .odr = {
drivers/iio/accel/st_accel_i2c.c +5 -0
index 8b9cc84..294a32f 100644
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
                .compatible = "st,lsm303agr-accel",
                .data = LSM303AGR_ACCEL_DEV_NAME,
        },
+       {
+               .compatible = "st,lis2dh12-accel",
+               .data = LIS2DH12_ACCEL_DEV_NAME,
+       },
        {},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
        { LSM303DLM_ACCEL_DEV_NAME },
        { LSM330_ACCEL_DEV_NAME },
        { LSM303AGR_ACCEL_DEV_NAME },
+       { LIS2DH12_ACCEL_DEV_NAME },
        {},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
drivers/iio/accel/st_accel_spi.c +1 -1
index 54b61a3..e82bedf 100644
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
        { LSM303DLM_ACCEL_DEV_NAME },
        { LSM330_ACCEL_DEV_NAME },
        { LSM303AGR_ACCEL_DEV_NAME },
+       { LIS2DH12_ACCEL_DEV_NAME },
        {},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
--
Quoted 2 lines

1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html