Skip to contentSkip to conversation

Patch "ipv4: disable BH when changing ip local port range" has been added to the 4.3-stable tree

PATCH [email protected] 1 participant 1 message Nov 17, 2015

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

ipv4: disable BH when changing ip local port range

to the 4.3-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
ipv4-disable-bh-when-changing-ip-local-port-range.patch
and it can be found in the queue-4.3 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Tue Nov 17 14:33:46 PST 2015

From: WANG Cong <[email protected]>
Date: Tue, 3 Nov 2015 14:32:57 -0800
Subject: ipv4: disable BH when changing ip local port range

From: WANG Cong <[email protected]>

[ Upstream commit 4ee3bd4a8c7463cdef0b82ebc33fc94a9170a7e0 ]

This fixes the following lockdep warning:

[ INFO: inconsistent lock state ]
4.3.0-rc7+ #1197 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage.
sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a
{IN-SOFTIRQ-R} state was registered at:

   [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0
   [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4
   [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae
   [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116
   [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a
   [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5
   [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465
   [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633
   [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15
   [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d
   [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f
   [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e
   [<ffffffff8195bfef>] ip6_output+0x91/0xe5
   [<ffffffff819792ae>] dst_output_sk+0x47/0x4c
   [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82
   [<ffffffff8197981e>] mld_sendpack+0x189/0x266
   [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223
   [<ffffffff810de581>] call_timer_fn+0xfb/0x28c
   [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1
Fixes b8f1a55639e6 ("udp: Add function to make source port for UDP tunnels")
Cc Tom Herbert <[email protected]>
---
 net/ipv4/sysctl_net_ipv4.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv4/sysctl_net_ipv4.c +2 -2
@@ -48,14 +48,14 @@ static void set_local_port_range(struct
 {
 	bool same_parity = !((range[0] ^ range[1]) & 1);
 
-	write_seqlock(&net->ipv4.ip_local_ports.lock);
+	write_seqlock_bh(&net->ipv4.ip_local_ports.lock);
 	if (same_parity && !net->ipv4.ip_local_ports.warned) {
 		net->ipv4.ip_local_ports.warned = true;
 		pr_err_ratelimited("ip_local_port_range: prefer different parity for start/end values.\n");
 	}
 	net->ipv4.ip_local_ports.range[0] = range[0];
 	net->ipv4.ip_local_ports.range[1] = range[1];
-	write_sequnlock(&net->ipv4.ip_local_ports.lock);
+	write_sequnlock_bh(&net->ipv4.ip_local_ports.lock);
 }
 
 /* Validate changes from /proc interface. */

Patches currently in stable-queue which might be from [email protected] are

queue-4.3/ipv4-disable-bh-when-changing-ip-local-port-range.patch