Skip to contentSkip to conversation

Surface 3 HID parsing errors

DISCUSSION Srinivas Pandruvada 1 participant 1 message Nov 18, 2015 1 message not in the archive IIO

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 2 lines · Bastien Nocera

Hey,

Hi,

Quoted 2 lines

In kernel 4.4, the I2C hid layer throws errors when trying to parse the report descriptor for the HID sensor hub:

Was it working in 4.3? I gave a test with another device with i2c hid and 4.4.rc1 that is working. If it was working in 4.3 it will be easy to find the commit.

Thanks,
Srinivas

Quoted 951 lines

i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3

I've attached the i2c-hid debug output through dmesg, and the report descriptor in this mail. Any ideas?

Cheers

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-0.rc0.git7.3.fc24.x86_64 (hadess@coal) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Thu Nov 12 17:51:35 CET 2015
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59-2499-4ac6-8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000ba96efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba96f000-0x00000000bac6efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bac6f000-0x00000000bad6efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bad6f000-0x00000000bb3bffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb3c0000-0x00000000bbaccfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbacd000-0x00000000bbad0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbad1000-0x00000000bbad1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbad2000-0x00000000bbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0xbb7cac98  ACPI=0xbad5d000  ACPI 2.0=0xbad5d000  SMBIOS=0xbb5fbd18 
[    0.000000] esrt: Reserving ESRT space from 0x00000000bb7cac98 to 0x00000000bb7cad20.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Microsoft Corporation Surface 3/Surface 3, BIOS 1.50310.318 03/10/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   4 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   5 base 0BCC00000 mask FFFC00000 uncachable
[    0.000000]   6 base 0BCA00000 mask FFFE00000 uncachable
[    0.000000]   7 base 100000000 mask FC0000000 write-back
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbca00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE
[    0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE
[    0.000000] BRK [0x02050000, 0x02050fff] PGTABLE
[    0.000000] BRK [0x02051000, 0x02051fff] PGTABLE
[    0.000000] BRK [0x02052000, 0x02052fff] PGTABLE
[    0.000000] BRK [0x02053000, 0x02053fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3ef3c000-0x3fffafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BAD5D000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BAD5D0B0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BAD6A268 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BAD5D218 00D04B (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: APIC 0x00000000BAD6A378 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BAD6A400 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000BAD6A448 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: TCPA 0x00000000BAD6A4E8 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: MSDM 0x00000000BAD6A520 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BAD6A578 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: WDSA 0x00000000BAD6A5B8 00016F (v02 MSHWDS ACTABL   00000003 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000BAD6A728 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: HPET 0x00000000BAD6A770 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000BAD6A7A8 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6AF10 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6B1A0 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6B320 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.000000] ACPI: TPM2 0x00000000BAD6B748 000034 (v03                 00000000      00000000)
[    0.000000] ACPI: LPIT 0x00000000BAD6B780 000104 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[    0.000000] ACPI: OEM0 0x00000000BAD6B888 000084 (v05 INTEL  BATTERY  00000005 INTL 00000000)
[    0.000000] ACPI: BGRT 0x00000000BAD6B910 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: CSRT 0x00000000BAD6B948 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
[    0.000000] ACPI: SSDT 0x00000000BAD6BA98 001F68 (v01 DptfTb DptfTab  00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6DA00 000104 (v01 SoCDpf SoCDptf  00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6DB08 0005C7 (v01 CpuDpf CpuDptf  00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BAD6E0D0 000058 (v01 LowPM  LowPwrM  00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fd71000-0x13fd82fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x00000000ba96efff]
[    0.000000]   node   0: [mem 0x00000000bbacd000-0x00000000bbad0fff]
[    0.000000]   node   0: [mem 0x00000000bbad2000-0x00000000bbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1027133
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11891 pages used for memmap
[    0.000000]   DMA32 zone: 760993 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics stolen memory at 0xbce00000-0xbedfffff
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xba96f000-0xbac6efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbac6f000-0xbad6efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad6f000-0xbb3bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb3c0000-0xbbaccfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbad1000-0xbbad1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbcdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbce00000-0xbedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbee00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xbee00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013f800000 s98712 r8192 d32360 u524288
[    0.000000] pcpu-alloc: s98712 r8192 d32360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011061
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59-2499-4ac6-8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 3909748K/4108532K available (7766K kernel code, 1293K rwdata, 3424K rodata, 1528K init, 1544K bss, 198784K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:65792 nr_irqs:1024 0
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Using PIT calibration value
[    0.000000] tsc: Detected 1599.842 MHz processor
[    0.000062] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.68 BogoMIPS (lpj=1599842)
[    0.000069] pid_max: default: 32768 minimum: 301
[    0.000088] ACPI: Core revision 20150930
[    0.032405] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.034044] Security Framework initialized
[    0.034052] Yama: becoming mindful.
[    0.034064] SELinux:  Initializing.
[    0.034090] SELinux:  Starting in permissive mode
[    0.034888] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.037265] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.038309] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038336] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038877] Initializing cgroup subsys io
[    0.038889] Initializing cgroup subsys memory
[    0.038908] Initializing cgroup subsys devices
[    0.038917] Initializing cgroup subsys freezer
[    0.038924] Initializing cgroup subsys net_cls
[    0.038931] Initializing cgroup subsys perf_event
[    0.038939] Initializing cgroup subsys net_prio
[    0.038947] Initializing cgroup subsys hugetlb
[    0.038961] Initializing cgroup subsys pids
[    0.039016] CPU: Physical Processor ID: 0
[    0.039021] CPU: Processor Core ID: 0
[    0.039030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.039034] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.044447] mce: CPU supports 6 MCE banks
[    0.044465] CPU0: Thermal monitoring enabled (TM1)
[    0.044475] process: using mwait in idle threads
[    0.044482] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.044485] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.044991] Freeing SMP alternatives memory: 28K (ffffffff81ec3000 - ffffffff81eca000)
[    0.053986] ftrace: allocating 29314 entries in 115 pages
[    0.075556] TSC deadline timer enabled
[    0.075566] smpboot: CPU0: Intel(R) Atom(TM) x7-Z8700  CPU @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.075621] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.075646] ... version:                3
[    0.075650] ... bit width:              40
[    0.075652] ... generic registers:      2
[    0.075655] ... value mask:             000000ffffffffff
[    0.075658] ... max period:             000000ffffffffff
[    0.075660] ... fixed-purpose events:   3
[    0.075663] ... event mask:             0000000700000003
[    0.077852] x86: Booting SMP configuration:
[    0.077859] .... node  #0, CPUs:      #1
[    0.096652] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.097062]  #2 #3
[    0.134526] x86: Booted up 1 node, 4 CPUs
[    0.134533] smpboot: Total of 4 processors activated (12798.73 BogoMIPS)
[    0.135920] devtmpfs: initialized
[    0.144664] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.144671] PM: Registering ACPI NVS region [mem 0xbad6f000-0xbb3bffff] (6623232 bytes)
[    0.145173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.145446] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.145454] pinctrl core: initialized pinctrl subsystem
[    0.145579] RTC time: 11:58:14, date: 11/18/15
[    0.145996] NET: Registered protocol family 16
[    0.148387] cpuidle: using governor menu
[    0.148642] ACPI: bus type PCI registered
[    0.148648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.148876] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.148884] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.148892] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[    0.148918] PCI: Using configuration type 1 for base access
[    0.155555] ACPI: Added _OSI(Module Device)
[    0.155561] ACPI: Added _OSI(Processor Device)
[    0.155564] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.155567] ACPI: Added _OSI(Processor Aggregator Device)
[    0.160611] ACPI : EC: Look up EC in DSDT
[    0.173213] ACPI Error: Needed [Integer/String/Buffer], found [Device] ffff88013f4a9e10 (20150930/exresop-424)
[    0.173230] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [KEYS] (Region) (20150930/nsinit-355)
[    0.177104] \_SB_ _OSC UUID 0811B06E-4A27-44F9-8D60-3CBBC22E7B48
[    0.177111]  6E B0 11 08 27 4A F9 44 8D 60 3C BB C2 2E 7B 48
[    0.177897] ACPI: Dynamic OEM Table Load:
[    0.177919] ACPI: SSDT 0xFFFF880139F02000 00066D (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.179479] ACPI: Dynamic OEM Table Load:
[    0.179492] ACPI: SSDT 0xFFFF880139F31000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.181526] ACPI: Dynamic OEM Table Load:
[    0.181538] ACPI: SSDT 0xFFFF880139F2DE00 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.183049] ACPI: Dynamic OEM Table Load:
[    0.183060] ACPI: SSDT 0xFFFF880139F6F3C0 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.186385] ACPI: Interpreter enabled
[    0.186406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.186421] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.186430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
[    0.186442] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150930/hwxface-580)
[    0.186461] ACPI: (supports S0 S5)
[    0.186469] ACPI: Using IOAPIC for interrupt routing
[    0.186559] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.189570] ACPI: Power Resource [ID3C] (on)
[    0.191416] ACPI: Power Resource [PRWF] (on)
[    0.193179] ACPI: Power Resource [USBC] (on)
[    0.194361] ACPI: Power Resource [WWPR] (off)
[    0.201365] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163)
[    0.201377] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297)
[    0.201387] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542)
[    0.201443] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163)
[    0.201451] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297)
[    0.201458] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542)
[    0.201472] ACPI Error: Method execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/uteval-103)
[    0.203593] ACPI: Power Resource [CLK3] (on)
[    0.210425] ACPI: Power Resource [CLK0] (on)
[    0.210537] ACPI: Power Resource [CLK1] (on)
[    0.210779] ACPI: Power Resource [P28X] (off)
[    0.210883] ACPI: Power Resource [P18X] (off)
[    0.212235] ACPI Error: No handler for Region [SNOP] (ffff88013f4b6048) [GenericSerialBus] (20150930/evregion-163)
[    0.212246] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20150930/exfldio-297)
[    0.212256] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffff88013f4b5e88), AE_NOT_EXIST (20150930/psparse-542)
[    0.212271] ACPI Error: Method execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffff88013f4b5e88), AE_NOT_EXIST (20150930/uteval-103)
[    0.213328] ACPI: Power Resource [TCPR] (off)
[    0.228087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.228106] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.228114] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766
[    0.228119]  5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
[    0.228308] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766
[    0.228312]  5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
[    0.228499] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766
[    0.228503]  5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66
[    0.228690] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.228729] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.229989] PCI host bridge to bus 0000:00
[    0.229998] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.230005] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.230010] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.230014] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.230021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.230025] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.230030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.230035] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
[    0.230040] pci_bus 0000:00: root bus resource [mem 0xbce00001-0xbee00000 window]
[    0.230044] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.230050] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.230069] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.230606] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
[    0.230648] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[    0.230665] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.230677] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.230996] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
[    0.231025] pci 0000:00:03.0: reg 0x10: [mem 0xd1000000-0xd13fffff]
[    0.231366] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.231402] pci 0000:00:0b.0: reg 0x10: [mem 0xd1a37000-0xd1a37fff 64bit]
[    0.231773] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.231820] pci 0000:00:14.0: reg 0x10: [mem 0xd1a00000-0xd1a0ffff 64bit]
[    0.231912] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.232271] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.232312] pci 0000:00:1a.0: reg 0x10: [mem 0xd1700000-0xd17fffff]
[    0.232327] pci 0000:00:1a.0: reg 0x14: [mem 0xd1600000-0xd16fffff]
[    0.232418] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.232857] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.234442] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.235027] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.236288] pci 0000:01:00.0: [11ab:2b38] type 00 class 0x020000
[    0.236363] pci 0000:01:00.0: reg 0x10: [mem 0xd1900000-0xd19fffff 64bit pref]
[    0.236398] pci 0000:01:00.0: reg 0x18: [mem 0xd1800000-0xd18fffff 64bit pref]
[    0.236649] pci 0000:01:00.0: supports D1 D2
[    0.236654] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.236795] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.239368] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.239381] pci 0000:00:1c.0:   bridge window [mem 0xd1800000-0xd19fffff]
[    0.243454] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163)
[    0.243464] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297)
[    0.243476] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542)
[    0.248117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248310] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248984] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.249149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.249354] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.256828] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.256837] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.256844] vgaarb: loaded
[    0.256850] vgaarb: bridge control possible 0000:00:02.0
[    0.257148] SCSI subsystem initialized
[    0.257277] libata version 3.00 loaded.
[    0.257381] ACPI: bus type USB registered
[    0.257440] usbcore: registered new interface driver usbfs
[    0.257463] usbcore: registered new interface driver hub
[    0.257520] usbcore: registered new device driver usb
[    0.258049] PCI: Using ACPI for IRQ routing
[    0.260789] PCI: pci_cache_line_size set to 64 bytes
[    0.260974] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.260982] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.260987] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.260991] e820: reserve RAM buffer [mem 0xba96f000-0xbbffffff]
[    0.260994] e820: reserve RAM buffer [mem 0xbbad1000-0xbbffffff]
[    0.261336] NetLabel: Initializing
[    0.261342] NetLabel:  domain hash size = 128
[    0.261344] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.261385] NetLabel:  unlabeled traffic allowed by default
[    0.261591] clocksource: Switched to clocksource refined-jiffies
[    0.286665] pnp: PnP ACPI init
[    0.287070] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.287077] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.287082] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.287094] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.287342] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.291285] system 00:02: [mem 0xd1a35000-0xd1a35fff] has been reserved
[    0.291293] system 00:02: [mem 0xd1a33000-0xd1a33fff] has been reserved
[    0.291299] system 00:02: [mem 0xd1a22000-0xd1a22fff] has been reserved
[    0.291304] system 00:02: [mem 0xd1a20000-0xd1a20fff] has been reserved
[    0.291310] system 00:02: [mem 0xd1a1e000-0xd1a1efff] has been reserved
[    0.291315] system 00:02: [mem 0xd1a1c000-0xd1a1cfff] has been reserved
[    0.291320] system 00:02: [mem 0xd1a1a000-0xd1a1afff] has been reserved
[    0.291325] system 00:02: [mem 0xd1a18000-0xd1a18fff] has been reserved
[    0.291330] system 00:02: [mem 0xd1a31000-0xd1a31fff] has been reserved
[    0.291335] system 00:02: [mem 0xd1a2f000-0xd1a2ffff] has been reserved
[    0.291347] system 00:02: [mem 0xd1a2d000-0xd1a2dfff] has been reserved
[    0.291353] system 00:02: [mem 0xd1a2b000-0xd1a2bfff] has been reserved
[    0.291358] system 00:02: [mem 0xd1a29000-0xd1a29fff] has been reserved
[    0.291363] system 00:02: [mem 0xd1a27000-0xd1a27fff] has been reserved
[    0.291368] system 00:02: [mem 0xd1a25000-0xd1a25fff] has been reserved
[    0.291373] system 00:02: [mem 0xd1a23000-0xd1a23fff] has been reserved
[    0.291385] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291508] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.291514] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.291522] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.291527] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.291532] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.291537] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.291542] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    0.291548] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.291553] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.291561] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291987] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.292851] pnp: PnP ACPI: found 5 devices
[    0.299404] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.299415] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.299430] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.299436] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.299441] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.299446] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.299473] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1b00000-0xd1cfffff 64bit pref]
[    0.299481] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.299492] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.299518] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.299588] pci 0000:00:1c.0:   bridge window [mem 0xd1800000-0xd19fffff]
[    0.299636] pci 0000:00:1c.0:   bridge window [mem 0xd1b00000-0xd1cfffff 64bit pref]
[    0.299727] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.299733] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.299737] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.299742] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.299746] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.299751] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.299755] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.299760] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
[    0.299765] pci_bus 0000:00: resource 12 [mem 0xbce00001-0xbee00000 window]
[    0.299769] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xdfffffff window]
[    0.299774] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.299778] pci_bus 0000:01: resource 1 [mem 0xd1800000-0xd19fffff]
[    0.299783] pci_bus 0000:01: resource 2 [mem 0xd1b00000-0xd1cfffff 64bit pref]
[    0.299909] NET: Registered protocol family 2
[    0.300385] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.300584] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.300778] TCP: Hash tables configured (established 32768 bind 32768)
[    0.300889] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.300952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.301159] NET: Registered protocol family 1
[    0.301203] pci 0000:00:02.0: Video device with shadowed ROM
[    0.301437] PCI: CLS 64 bytes, default 64
[    0.301612] Unpacking initramfs...
[    0.944479] Freeing initrd memory: 17148K (ffff88003ef3c000 - ffff88003fffb000)
[    0.944503] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.944511] software IO TLB [mem 0xb6000000-0xba000000] (64MB) mapped at [ffff8800b6000000-ffff8800b9ffffff]
[    0.946859] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.946947] audit: initializing netlink subsys (disabled)
[    0.946995] audit: type=2000 audit(1447847894.827:1): initialized
[    0.947735] Initialise system trusted keyring
[    0.947961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.952037] zbud: loaded
[    0.952573] VFS: Disk quotas dquot_6.6.0
[    0.952695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.953873] Key type big_key registered
[    0.953884] SELinux:  Registering netfilter hooks
[    0.968077] NET: Registered protocol family 38
[    0.968107] Key type asymmetric registered
[    0.968117] Asymmetric key parser 'x509' registered
[    0.968297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.968404] io scheduler noop registered
[    0.968414] io scheduler deadline registered
[    0.968524] io scheduler cfq registered (default)
[    0.970925] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.970934] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.970983] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.971002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.971097] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.971259] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.971277] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.971374] efifb: probing for efifb
[    0.971422] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1876k, total 1875k
[    0.971426] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.971428] efifb: scrolling: redraw
[    0.971432] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.971761] Console: switching to colour frame buffer device 100x37
[    0.975486] fb0: EFI VGA frame buffer device
[    0.975534] intel_idle: MWAIT substates: 0x33000020
[    0.975538] intel_idle: v0.4 model 0x4C
[    0.975541] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.976263] ACPI: AC Adapter [ADP1] (off-line)
[    0.976468] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.976476] ACPI: Power Button [PWRB]
[    0.976577] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.976584] ACPI: Sleep Button [SLPB]
[    0.976700] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.976748] ACPI: Lid Switch [LID]
[    0.981348] GHES: HEST is not enabled!
[    0.981617] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.002137] 00:01: ttyS0 at I/O 0x3f8 (irq = 224, base_baud = 115200) is a 16550A
[    1.006736] 8086228A:00: ttyS4 at MMIO 0xd1a21000 (irq = 4, base_baud = 2764800) is a 16550A
[    1.007147] 8086228A:01: ttyS5 at MMIO 0xd1a1f000 (irq = 5, base_baud = 2764800) is a 16550A
[    1.007950] hpet: number irqs doesn't agree with number of timers
[    1.008075] Non-volatile memory driver v1.3
[    1.008172] Linux agpgart interface v0.103
[    1.009584] libphy: Fixed MDIO Bus: probed
[    1.009745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.009760] ehci-pci: EHCI PCI platform driver
[    1.009799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.009814] ohci-pci: OHCI PCI platform driver
[    1.009841] uhci_hcd: USB Universal Host Controller Interface driver
[    1.010223] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.010374] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.010631] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.010649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.011036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.011045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011050] usb usb1: Product: xHCI Host Controller
[    1.011054] usb usb1: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd
[    1.011058] usb usb1: SerialNumber: 0000:00:14.0
[    1.011459] hub 1-0:1.0: USB hub found
[    1.011493] hub 1-0:1.0: 7 ports detected
[    1.012775] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.012917] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.013027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.013033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.013037] usb usb2: Product: xHCI Host Controller
[    1.013041] usb usb2: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd
[    1.013045] usb usb2: SerialNumber: 0000:00:14.0
[    1.013359] hub 2-0:1.0: USB hub found
[    1.013404] hub 2-0:1.0: 6 ports detected
[    1.013760] usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1)
[    1.013765] usb usb2-port2: failed to peer to usb1-port1 (-16)
[    1.013768] usb: port power management may be unreliable
[    1.013910] usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
[    1.013915] usb usb2-port3: failed to peer to usb1-port1 (-16)
[    1.014064] usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1)
[    1.014069] usb usb2-port4: failed to peer to usb1-port1 (-16)
[    1.014205] usb: failed to peer usb2-port5 and usb1-port1 by location (usb2-port5:none) (usb1-port1:usb2-port1)
[    1.014211] usb usb2-port5: failed to peer to usb1-port1 (-16)
[    1.014350] usb: failed to peer usb2-port6 and usb1-port1 by location (usb2-port6:none) (usb1-port1:usb2-port1)
[    1.014355] usb usb2-port6: failed to peer to usb1-port1 (-16)
[    1.014752] usbcore: registered new interface driver usbserial
[    1.014778] usbcore: registered new interface driver usbserial_generic
[    1.014800] usbserial: USB Serial support registered for generic
[    1.014885] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.095995] i8042: No controller found
[    2.096269] mousedev: PS/2 mouse device common for all mice
[    2.096941] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150930/evxface-654)
[    2.097289] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.097360] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
[    2.097543] device-mapper: uevent: version 1.0.3
[    2.097771] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
[    2.097949] Intel P-state driver initializing.
[    2.099586] hidraw: raw HID events driver (C) Jiri Kosina
[    2.099976] usbcore: registered new interface driver usbhid
[    2.099990] usbhid: USB HID core driver
[    2.100680] drop_monitor: Initializing network drop monitor service
[    2.101200] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.101413] Initializing XFRM netlink socket
[    2.102692] NET: Registered protocol family 10
[    2.104220] mip6: Mobile IPv6
[    2.104257] NET: Registered protocol family 17
[    2.105908] SSE version of gcm_enc/dec engaged.
[    2.125039] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170f8fa7afd, max_idle_ns: 440795249780 ns
[    2.140046] clocksource: Switched to clocksource tsc
[    2.170094] registered taskstats version 1
[    2.170134] Loading compiled-in X.509 certificates
[    2.172765] Loaded X.509 cert 'Fedora kernel signing key: 7f87fbbd4c585d8712955db375636155dac694cb'
[    2.172843] zswap: loaded using pool lzo/zbud
[    2.174130]   Magic number: 7:990:984
[    2.174471] rtc_cmos 00:04: setting system clock to 2015-11-18 11:58:16 UTC (1447847896)
[    2.175119] PM: Hibernation image not present or could not be loaded.
[    2.179004] Freeing unused kernel memory: 1528K (ffffffff81d45000 - ffffffff81ec3000)
[    2.179012] Write protecting the kernel read-only data: 12288k
[    2.180231] Freeing unused kernel memory: 412K (ffff880001799000 - ffff880001800000)
[    2.184021] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
[    2.184065] ------------[ cut here ]------------
[    2.184076] WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5e1/0x780()
[    2.184081] x86/mm: Found insecure W+X mapping at address ffff880001c00000/0xffff880001c00000
[    2.184084] Modules linked in:
[    2.184091] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-0.rc0.git7.3.fc24.x86_64 #1
[    2.184094] Hardware name: Microsoft Corporation Surface 3/Surface 3, BIOS 1.50310.318 03/10/2015
[    2.184097]  0000000000000000 000000006ef97ae6 ffff880139c27d48 ffffffff813aea8f
[    2.184102]  ffff880139c27d90 ffff880139c27d80 ffffffff810a1a22 ffff880139c27e90
[    2.184107]  0000000000000163 0000000000000004 0000000000000000 0000000000000000
[    2.184111] Call Trace:
[    2.184121]  [<ffffffff813aea8f>] dump_stack+0x44/0x55
[    2.184127]  [<ffffffff810a1a22>] warn_slowpath_common+0x82/0xc0
[    2.184131]  [<ffffffff810a1abc>] warn_slowpath_fmt+0x5c/0x80
[    2.184135]  [<ffffffff8106f6b1>] note_page+0x5e1/0x780
[    2.184140]  [<ffffffff8106fb5c>] ptdump_walk_pgd_level_core+0x30c/0x440
[    2.184145]  [<ffffffff8106fd37>] ptdump_walk_pgd_level_checkwx+0x17/0x20
[    2.184149]  [<ffffffff81065a64>] mark_rodata_ro+0xf4/0x100
[    2.184154]  [<ffffffff81785360>] ? rest_init+0x80/0x80
[    2.184158]  [<ffffffff8178537d>] kernel_init+0x1d/0xe0
[    2.184163]  [<ffffffff8179134f>] ret_from_fork+0x3f/0x70
[    2.184167]  [<ffffffff81785360>] ? rest_init+0x80/0x80
[    2.184170] ---[ end trace d16986b6dd8293fa ]---
[    2.200571] x86/mm: Checked W+X mappings: FAILED, 56407 W+X pages found.
[    2.222095] random: systemd urandom read with 11 bits of entropy available
[    2.225608] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.225972] systemd[1]: Detected architecture x86-64.
[    2.225979] systemd[1]: Running in initial RAM disk.
[    2.226027] systemd[1]: Set hostname to <surface>.
[    2.327387] systemd[1]: Created slice -.slice.
[    2.327414] systemd[1]: Starting -.slice.
[    2.327519] systemd[1]: Listening on Journal Socket.
[    2.327538] systemd[1]: Starting Journal Socket.
[    2.327608] systemd[1]: Listening on udev Control Socket.
[    2.327626] systemd[1]: Starting udev Control Socket.
[    2.327801] systemd[1]: Listening on Journal Audit Socket.
[    2.327819] systemd[1]: Starting Journal Audit Socket.
[    2.327966] systemd[1]: Created slice System Slice.
[    2.327985] systemd[1]: Starting System Slice.
[    2.328059] systemd[1]: Started dracut ask for additional cmdline parameters.
[    2.337638] systemd[1]: Starting Setup Virtual Console...
[    2.338093] systemd[1]: Started Load Kernel Modules.
[    2.339664] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.339714] systemd[1]: Reached target Swap.
[    2.339747] systemd[1]: Starting Swap.
[    2.339865] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.339884] systemd[1]: Starting Journal Socket (/dev/log).
[    2.341105] systemd[1]: Starting Journal Service...
[    2.344032] systemd[1]: Starting dracut cmdline hook...
[    2.344154] systemd[1]: Listening on udev Kernel Socket.
[    2.344182] systemd[1]: Starting udev Kernel Socket.
[    2.344216] systemd[1]: Reached target Sockets.
[    2.344235] systemd[1]: Starting Sockets.
[    2.344271] systemd[1]: Reached target Slices.
[    2.344287] systemd[1]: Starting Slices.
[    2.344333] systemd[1]: Reached target Timers.
[    2.344349] systemd[1]: Starting Timers.
[    2.345681] systemd[1]: Starting Apply Kernel Variables...
[    2.345729] systemd[1]: Reached target Local File Systems.
[    2.345763] systemd[1]: Starting Local File Systems.
[    2.346977] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.349886] audit: type=1130 audit(1447847896.674:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.350622] systemd[1]: Started Apply Kernel Variables.
[    2.350705] audit: type=1130 audit(1447847896.675:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.358450] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.363937] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    2.367479] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.367595] audit: type=1130 audit(1447847896.692:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.385859] systemd[1]: Started Journal Service.
[    2.385980] audit: type=1130 audit(1447847896.710:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.495943] audit: type=1130 audit(1447847896.820:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.528152] usb 1-2: New USB device found, idVendor=0424, idProduct=2137
[    2.528159] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.528162] usb 1-2: Product: USB2137
[    2.528165] usb 1-2: Manufacturer: SMSC
[    2.528640] hub 1-2:1.0: USB hub found
[    2.528677] hub 1-2:1.0: 7 ports detected
[    2.547519] audit: type=1130 audit(1447847896.872:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.554259] audit: type=1130 audit(1447847896.878:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.573608] audit: type=1130 audit(1447847896.898:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.608487] audit: type=1130 audit(1447847896.933:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.683326] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    2.777825] sdhci: Secure Digital Host Controller Interface driver
[    2.777832] sdhci: Copyright(c) Pierre Ossman
[    2.782160] sdhci-acpi 80860F14:00: No vmmc regulator found
[    2.782168] sdhci-acpi 80860F14:00: No vqmmc regulator found
[    2.786635] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.789488] sdhci-acpi 80860F14:01: No vmmc regulator found
[    2.789495] sdhci-acpi 80860F14:01: No vqmmc regulator found
[    2.792274] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.795613] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    2.855630] usb 1-3: New USB device found, idVendor=045e, idProduct=07de
[    2.855638] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.855641] usb 1-3: Product: Surface Type Cover
[    2.855644] usb 1-3: Manufacturer: Microsoft
[    2.869558] [drm] Initialized drm 1.1.0 20060810
[    2.896040] mmc0: MAN_BKOPS_EN bit is not set
[    2.904984] mmc0: new HS200 MMC card at address 0001
[    2.905235] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07DE.0001/input/input3
[    2.913347] mmcblk0: mmc0:0001 MDGAGC 116 GiB 
[    2.914542] mmcblk0boot0: mmc0:0001 MDGAGC partition 1 4.00 MiB
[    2.914804] mmcblk0boot1: mmc0:0001 MDGAGC partition 2 4.00 MiB
[    2.914958] mmcblk0rpmb: mmc0:0001 MDGAGC partition 3 4.00 MiB
[    2.917425]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    2.926327] usb 1-2.4: new full-speed USB device number 4 using xhci_hcd
[    2.957394] microsoft 0003:045E:07DE.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000:00:14.0-3/input0
[    3.013134] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b
[    3.013142] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.013145] usb 1-2.4: Product: USB Receiver
[    3.013148] usb 1-2.4: Manufacturer: Logitech
[    3.091443] usb 1-2.6: new full-speed USB device number 5 using xhci_hcd
[    3.179814] usb 1-2.6: New USB device found, idVendor=0596, idProduct=0524
[    3.179828] usb 1-2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.179842] usb 1-2.6: Product: 3M MicroTouch USB controller
[    3.179847] usb 1-2.6: Manufacturer: 3M
[    3.259174] usb 1-2.7: new high-speed USB device number 6 using xhci_hcd
[    3.443133] usb 1-2.7: New USB device found, idVendor=0bda, idProduct=570a
[    3.443149] usb 1-2.7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.443158] usb 1-2.7: Product: DELL S2340T Webcam
[    3.443167] usb 1-2.7: Manufacturer: 56.18006.48133B10J
[    3.443173] usb 1-2.7: SerialNumber: 201209030001
[    3.636115] usb 1-2.1: new high-speed USB device number 7 using xhci_hcd
[    3.724811] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2134
[    3.724824] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.724837] usb 1-2.1: Product: USB2134
[    3.724842] usb 1-2.1: Manufacturer: SMSC
[    3.726292] hub 1-2.1:1.0: USB hub found
[    3.726405] hub 1-2.1:1.0: 4 ports detected
[    3.832992] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[    4.292021] systemd-journald[168]: Received SIGTERM from PID 1 (systemd).
[    4.438886] SELinux: 32768 avtab hash slots, 103234 rules.
[    4.471071] SELinux: 32768 avtab hash slots, 103234 rules.
[    4.549894] SELinux:  8 users, 14 roles, 4897 types, 305 bools, 1 sens, 1024 cats
[    4.549902] SELinux:  92 classes, 103234 rules
[    4.556286] SELinux:  Completing initialization.
[    4.556313] SELinux:  Setting up existing superblocks.
[    4.583686] systemd[1]: Successfully loaded SELinux policy in 188.208ms.
[    4.607101] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    4.699847] systemd[1]: Relabelled /dev and /run in 82.889ms.
[    5.051189] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[    5.114132] RPC: Registered named UNIX socket transport module.
[    5.114138] RPC: Registered udp transport module.
[    5.114140] RPC: Registered tcp transport module.
[    5.114142] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.172967] Installing knfsd (copyright (C) 1996 [email protected]).
[    5.193260] systemd-journald[502]: Received request to flush runtime journal from PID 1
[    5.723997] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    5.724552] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    5.728092] i2c_hid i2c-MSHW0102:00: Fetching the HID descriptor
[    5.728101] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=01 00
[    5.731335] i2c_hid i2c-MSHW0102:00: HID Descriptor: 1e 00 00 01 8e 06 02 00 03 00 3f 00 04 00 3f 00 05 00 06 00 5e 04 bd 07 03 00 00 00 00 00
[    5.733249] i2c_hid i2c-MSHW0102:00: entering i2c_hid_parse
[    5.733256] i2c_hid i2c-MSHW0102:00: i2c_hid_hwreset
[    5.733260] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
[    5.733264] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08
[    5.734331] i2c_hid i2c-MSHW0102:00: input: 34 00 23 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.738335] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.741327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00
[    5.742345] i2c_hid i2c-MSHW0102:00: resetting...
[    5.742360] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 01
[    5.745330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4f 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 23 00 00 80 00 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f
[    5.749330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 18 00 00 00 0c 20 01 00 64 3e 00 20 fd 01 00 00 f1 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41 5b 00 00 4f c5 00 00
[    5.750257] wmi: Mapper loaded
[    5.753324] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00 00 01 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f
[    5.756320] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00
[    5.759322] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 51 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 d8 ad de 34 90 04 40 01 00 00 00 a0 f1 ff 1f fb cf 00 00
[    5.763327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 bf 89 00 00 cc f9 ff 1f ed 89 00 00 24 3f 00 20 f1 ff ff ff 00 00 00 00 1e 00 00 00 3d a5 00 00 ff ff 00 00 cc f9 ff 1f 13 00 00 00
[    5.764944] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: waiting...
[    5.768348] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: finished.
[    5.768358] i2c_hid i2c-MSHW0102:00: asking HID report descriptor
[    5.768363] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=02 00
[    5.818333] i2c_hid i2c-MSHW0102:00: Report Descriptor: 05 20 09 01 a1 01 85 01 05 20 09 73 a1 00 0a 09 03 15 00 25 02 75 08 95 01 a1 02 0a 30 08 0a 31 08 0a 32 08 b1 00 c0 0a 0e 03 15 00 27 ff ff ff ff 75 20 95 01 55 00 b1 02 0a 52 14 15 00 26 ff
[    5.819766] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
[    5.819774] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08
[    5.824458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.845074] random: nonblocking pool is initialized
[    5.880807] i2c i2c-6: Failed to register i2c client MSHW0011:00 at 0x6e (-16)
[    5.880816] i2c i2c-6: failed to add I2C device MSHW0011:00 from ACPI
[    5.885569] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
[    5.890627] intel_sst_acpi 808622A8:00: No matching machine driver found
[    5.897986] media: Linux media interface: v0.10
[    5.900205] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.4/input2
[    5.953621] input: 3M 3M MicroTouch USB controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.6/1-2.6:1.0/0003:0596:0524.0005/input/input4
[    5.957627] hid-multitouch 0003:0596:0524.0005: input,hiddev0,hidraw2: USB HID v1.10 Pointer [3M 3M MicroTouch USB controller] on usb-0000:00:14.0-2.6/input0
[    5.963400] rt5640 i2c-10EC5640:00: Device with ID register 0x6308 is not rt5640/39
[    5.963731] mwifiex_pcie 0000:01:00.0: enabling device (0000 -> 0002)
[    5.963973] mwifiex: rx work enabled, cpus 4
[    5.967068] Linux video capture interface: v2.00
[    6.156475] audit_printk_skb: 162 callbacks suppressed
[    6.156482] audit: type=1130 audit(1447844300.481:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c43308f2\x2dad28\x2d4c0e\x2d93d5\x2d17cb6a415c7a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.178250] audit: type=1130 audit(1447844300.502:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-5C9B\x2dF942 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.181591] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[    6.189085] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[    6.302207] usbcore: registered new interface driver snd-usb-audio
[    6.302496] uvcvideo: Found UVC 1.00 device DELL S2340T Webcam (0bda:570a)
[    6.312186] input: DELL S2340T Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.7/1-2.7:1.0/input/input5
[    6.312595] usbcore: registered new interface driver uvcvideo
[    6.312599] USB Video Class driver (1.1.1)
[    6.368462] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
[    6.368470] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08
[    6.369920] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.369926] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 31 02 06 00
[    6.370828] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 01 01 10 00 00 00 64 00 02 06 02 10
[    6.370836] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.370840] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 32 02 06 00
[    6.371553] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 02 01 10 00 00 00 64 00 02 06 02 10
[    6.371560] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.371564] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 33 02 06 00
[    6.372818] i2c_hid i2c-MSHW0102:00: report (len=30): 1e 00 03 01 64 00 00 00 e8 03 02 06 02 64 28 00 0a 00 64 00 0b 00 64 00 40 1f 0f 27 41 1f
[    6.372825] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.372828] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 34 02 06 00
[    6.373572] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 04 01 10 00 00 00 e8 03 02 06 02 10
[    6.373577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.373580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 20 06 00
[    6.377269] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.377275] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3
[    6.377279] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.377282] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 21 06 00
[    6.380952] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.380956] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3
[    6.380960] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.380962] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 22 06 00
[    6.381876] i2c_hid i2c-MSHW0102:00: report (len=19): 13 00 22 11 2d 07 03 00 00 00 00 00 00 00 00 00 00 00 00
[    6.381885] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.381889] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 23 06 00
[    6.385306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.385311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.385314] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.385317] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 24 06 00
[    6.387675] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.387679] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.387683] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.387686] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 25 06 00
[    6.389936] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.389941] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.389944] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.389947] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 26 06 00
[    6.392303] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.392307] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.392311] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.392314] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 27 06 00
[    6.394569] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.394574] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.394577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.394580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 28 06 00
[    6.403249] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.403254] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.403257] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report
[    6.403260] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 29 06 00
[    6.406306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.406311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3
[    6.406737] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power
[    6.406741] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08
[    6.415968] intel_rapl: Found RAPL domain package
[    6.415975] intel_rapl: Found RAPL domain core
[    6.457446] iTCO_vendor_support: vendor-support=0
[    6.460919] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.461059] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[    6.468492] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.501451] cfg80211: World regulatory domain updated:
[    6.501460] cfg80211:  DFS Master region: unset
[    6.501462] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.501467] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.501470] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.501472] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    6.501475] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.501479] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.501481] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    6.501484] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.501486] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    6.501782] input: Logitech K750 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0004/0003:046D:4002.0007/input/input6
[    6.508473] logitech-hidpp-device 0003:046D:4002.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech K750] on usb-0000:00:14.0-2.4:1
[    6.513876] logitech-hidpp-device 0003:046D:4101.0008: hidraw4: USB HID v1.11 Keyboard [Logitech T650] on usb-0000:00:14.0-2.4:2
[    6.632786] usb 1-2: USB disconnect, device number 2
[    6.632794] usb 1-2.1: USB disconnect, device number 7
[    6.633427] usb 1-2.4: USB disconnect, device number 4
[    6.973656] mwifiex_pcie 0000:01:00.0: info: FW download over, size 759128 bytes
[    7.019691] usb 1-2.6: USB disconnect, device number 5
[    7.029537] audit: type=1130 audit(1447844301.354:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.044750] usb 1-2.7: USB disconnect, device number 6
[    7.098269] audit: type=1130 audit(1447844301.422:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.098323] audit: type=1131 audit(1447844301.422:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.130347] audit: type=1130 audit(1447844301.454:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.131370] audit: type=1130 audit(1447844301.456:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.138844] audit: type=1130 audit(1447844301.463:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.138885] audit: type=1131 audit(1447844301.463:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.165370] audit: type=1130 audit(1447844301.490:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.714927] usb 1-4: new high-speed USB device number 8 using xhci_hcd
[    7.879600] usb 1-4: New USB device found, idVendor=1286, idProduct=204c
[    7.879607] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.879611] usb 1-4: Product: Bluetooth and Wireless LAN Composite Device
[    7.879613] usb 1-4: Manufacturer: Marvell
[    7.879616] usb 1-4: SerialNumber: 0000000000000000
[    7.986455] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[    8.003453] Bluetooth: Core ver 2.21
[    8.004139] NET: Registered protocol family 31
[    8.004144] Bluetooth: HCI device and connection manager initialized
[    8.004153] Bluetooth: HCI socket layer initialized
[    8.004159] Bluetooth: L2CAP socket layer initialized
[    8.004180] Bluetooth: SCO socket layer initialized
[    8.029932] usbcore: registered new interface driver btusb
[    8.086243] mwifiex_pcie 0000:01:00.0 mlan0: set_features() failed (-1); wanted 0x0000000000004000, left 0x0000000000004800
[    8.094175] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.4.p112) 
[    8.094183] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (15.68.4.p112) 
[    8.104765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.104771] Bluetooth: BNEP filters: protocol multicast
[    8.104781] Bluetooth: BNEP socket layer initialized
[    8.115399] mwifiex_pcie 0000:01:00.0 wlp1s0: renamed from mlan0
[    8.166481] cfg80211: Regulatory domain changed to country: FR
[    8.166490] cfg80211:  DFS Master region: ETSI
[    8.166493] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.166497] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.166500] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.166503] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.166506] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    8.166509] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    8.373062] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.454501] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.602893] Ebtables v2.0 registered
[    8.645175] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    9.553171] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.555997] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    9.729716] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   11.112797] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'idoru' bssid f4:ca:e5:c2:74:6c
[   11.151645] mwifiex_pcie 0000:01:00.0: info: associated to bssid f4:ca:e5:c2:74:6c successfully
[   11.151703] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   12.448526] fuse init (API version 7.23)
[   12.615691] tun: Universal TUN/TAP device driver, 1.6
[   12.615696] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   12.617144] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9
[   12.664950] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9
[   12.664974] device virbr0-nic entered promiscuous mode
[   12.665019] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9
[   13.001815] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9
[   13.001868] virbr0: port 1(virbr0-nic) entered listening state
[   13.001884] virbr0: port 1(virbr0-nic) entered listening state
[   13.011555] mwifiex_pcie 0000:01:00.0 wlp1s0: set_features() failed (-1); wanted 0x0000000000006000, left 0x0000000000006800
[   13.011619] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9
[   13.011671] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9
[   13.011699] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9
[   13.011726] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9
[   13.011747] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9
[   13.107427] virbr0: port 1(virbr0-nic) entered disabled state
[   13.282532] Bluetooth: RFCOMM TTY layer initialized
[   13.282938] Bluetooth: RFCOMM socket layer initialized
[   13.284771] Bluetooth: RFCOMM ver 1.11
[   15.569185] mwifiex_pcie 0000:01:00.0: Rx of mgmt packet failed
[   51.727275] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  145.848207] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[  145.861772] usb 2-2: New USB device found, idVendor=1b8f, idProduct=0305
[  145.861784] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  145.861791] usb 2-2: Product: EXPRESS DUO
[  145.861797] usb 2-2: Manufacturer: STT
[  145.861802] usb 2-2: SerialNumber: 0312125800000506
[  145.927756] usb-storage 2-2:1.0: USB Mass Storage device detected
[  145.928129] scsi host0: usb-storage 2-2:1.0
[  145.928874] usbcore: registered new interface driver usb-storage
[  145.934957] usbcore: registered new interface driver uas
[  146.930454] scsi 0:0:0:0: Direct-Access     STT      EXPRESS DUO      1.00 PQ: 0 ANSI: 5
[  146.932927] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  146.933068] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[  146.935184] sd 0:0:0:0: [sda] Write Protect is off
[  146.935195] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[  146.935459] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[  146.939092]  sda:
[  146.940200] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  147.191570] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  175.356774] mwifiex_pcie 0000:01:00.0: Rx of mgmt packet failed