patch "iio: si7020: Swap data byte order" added to staging-linus
Subsystems (2)
This is a note to let you know that I've just added the patch titled
iio: si7020: Swap data byte order
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
Quoted 1 line
From
0d2f6fd3ffd5e7a447233a57112246bc00064752Mon Sep 17 00:00:00 2001
From: Chris Lesiak <[email protected]>
Date: Mon, 2 Nov 2015 15:45:03 -0600
Subject: iio: si7020: Swap data byte order
The Silicon Labs Si7013, Si7020, and Si7021 family of I2C humidity and temperature sensors deliver 16 bit data high byte first.
See the datasheet available at:
https://www.silabs.com/Support%20Documents%2fTechnicalDocs%2fSi7020-A20.pdf
But as documented in Documentation/i2c/smbus-protocol, i2c_smbus_read_word_data() expects the low byte first.
Change the driver to use i2c_smbus_read_word_swapped to get correct byte order.
--- drivers/iio/humidity/si7020.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/humidity/si7020.c +4 -4
@@ -50,10 +50,10 @@ static int si7020_read_raw(struct iio_dev *indio_dev,switch (mask) {case IIO_CHAN_INFO_RAW : - ret =i2c_smbus_read_word_data (*client, - chan->type ==IIO_TEMP ? -SI7020CMD_TEMP_HOLD : -SI7020CMD_RH_HOLD ); + ret =i2c_smbus_read_word_swapped (*client, + chan->type ==IIO_TEMP ? +SI7020CMD_TEMP_HOLD : +SI7020CMD_RH_HOLD );if (ret <0 )return ret; *val = ret >>2 ;
Signature · 1 line
2.6.2