sf: Remove #ifdef #endif in Makefile
PATCH 1/1 sf: Remove #ifdef #endif in Makefile
The #ifdef #endif in drivers/mtd/spi/Makefile actually does nothing but causes confusion. Remove it.
---
drivers/mtd/spi/Makefile | 2 -- 1 file changed, 2 deletions(-)
drivers/mtd/spi/Makefile +0 -2
@@ -12,9 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif -#ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o -#endif obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
Signature · 1 line
1.8.2.1
PATCH 1/1 sf: Remove #ifdef #endif in Makefile
Hi Bin,
Quoted 14 lines · Bin Meng
The #ifdef #endif in
drivers/mtd/spi/Makefileactually does nothing but causes confusion. Remove it.Signed-off-by Bin Meng <[email protected]>---
drivers/mtd/spi/Makefile | 2 -- 1 file changed, 2 deletions(-)drivers/mtd/spi/Makefile +0
-0
drivers/mtd/spi/Makefile obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o · line 18
Quoted 9 lines
drivers/mtd/spi/Makefile +0
-2@@ -12,9 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif -#ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o -#endif obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
Sent similar change on this [1] patch
[1] https://patchwork.ozlabs.org/patch/549041/
thanks!
Signature · 1 line
Jagan .
PATCH 1/1 sf: Remove #ifdef #endif in Makefile
Hi Jagan,
Quoted 29 lines · Jagan Teki
Hi Bin,
Quoted 14 lines · Bin Meng
The #ifdef #endif in
drivers/mtd/spi/Makefileactually does nothing but causes confusion. Remove it.Signed-off-by Bin Meng <[email protected]>---
drivers/mtd/spi/Makefile | 2 -- 1 file changed, 2 deletions(-)drivers/mtd/spi/Makefile +0
-0drivers/mtd/spi/Makefile obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o · line 18
Quoted 9 lines
drivers/mtd/spi/Makefile +0
-2@@ -12,9 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif -#ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o -#endif obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.oSent similar change on this [1] patch
Quoted 2 lines
Ah, yes! Thanks.
Quoted 2 lines
thanks!
--
Regards,
Bin