Patch "usb: gadget: atmel_usba_udc: Expose correct device speed" has been added to the 4.1-stable tree

This is a note to let you know that I've just added the patch titled

usb: gadget: atmel_usba_udc: Expose correct device speed

to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-gadget-atmel_usba_udc-expose-correct-device-speed.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Douglas Gilbert <[email protected]>
Date: Mon, 16 Nov 2015 19:22:08 +0100
Subject: usb: gadget: atmel_usba_udc: Expose correct device speed

From: Douglas Gilbert <[email protected]>

commit d134c48d889ddceadf4c990e6f3df16b816ed5d4 upstream.

Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register.

For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have).

---
 drivers/usb/gadget/udc/atmel_usba_udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1634,7 +1634,7 @@ static irqreturn_t usba_udc_irq(int irq,
 	spin_lock(&udc->lock);
 
 	int_enb = usba_int_enb_get(udc);
-	status = usba_readl(udc, INT_STA) & int_enb;
+	status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
 	DBG(DBG_INT, "irq, status=%#08x\n", status);
 
 	if (status & USBA_DET_SUSPEND) {

Patches currently in stable-queue which might be from [email protected] are

queue-4.1/usb-gadget-atmel_usba_udc-expose-correct-device-speed.patch