Skip to contentSkip to conversation

ARC: [axs10x] cap ethernet phy to 100 Mbit/sec

PATCH In review Alexey Brodkin 2 participants 2 messages Dec 7, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARC: [axs10x] cap ethernet phy to 100 Mbit/sec

Current ARC SDP boards cannot reliably handle 1Gbit Ethernet connections due to limitations in hardware.

To make sure networking is stable on the board we're limiting phy to 100 Mbit.

Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>
Cc Vineet Gupta <vgupta at synopsys.com>
---
 arch/arc/boot/dts/axs10x_mb.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arc/boot/dts/axs10x_mb.dtsi +1 -0
index f3db321..44a578c 100644
@@ -46,6 +46,7 @@
 			snps,pbl = < 32 >;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
+			max-speed = <100>;
 		};
 
 		ehci at 0x40000 {
Signature · 1 line
2.5.0
#1 lore raw

On Monday 07 December 2015 04:52 PM, Alexey Brodkin wrote:

Current ARC SDP boards cannot reliably handle 1Gbit Ethernet connections due to limitations in hardware.

To make sure networking is stable on the board we're limiting phy to 100 Mbit.

Signed-off-by Alexey Brodkin <abrodkin at synopsys.com><mailto:abrodkin at synopsys.com>
Cc Vineet Gupta <vgupta at synopsys.com><mailto:vgupta at synopsys.com>

LGTM - added to for-curr for 4.4 !

Thx,
-Vineet