pci: Update VPD size with correct length
PATCH 1/1 pci: Update VPD size with correct length
PCI-2.2 VPD entries have a maximum size of 32k, but might actually be smaller than that. To figure out the actual size one has to read the VPD area until the 'end marker' is reached.
Trying to read VPD data beyond that marker results in 'interesting' effects, from simple read errors to crashing the card. And to make matters worse not every PCI card implements this properly, leaving us with no 'end' marker or even completely invalid data. This path modifies the size of the VPD attribute to the available size, and disables the VPD attribute altogether if no valid data could be read.
--- drivers/pci/access.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
drivers/pci/access.c +49 -0
@@ -475,6 +475,48 @@ static const struct pci_vpd_ops pci_vpd_f0_ops = { .release = pci_vpd_pci22_release, }; +/** +* pci_vpd_size - determine actual size of Vital Product Data +* @dev: pci device struct +* @old_size: current assumed size, also maximum allowed size +* +*/ +static size_t +pci_vpd_pci22_size (struct pci_dev *dev,size_t old_size) +{ +size_t off =0 ; +unsigned char header[1 +2 ];/* 1 byte tag, 2 bytes length */ + +while (off < old_size &&pci_read_vpd (dev, off,1 , header)) { +unsigned char tag; + +if (header[0 ] ==0xff ) { +/* Invalid data from VPD read */ + tag = header[0 ]; + }else if (header[0 ] &0x80 ) { +/* Large Resource Data Type Tag */ +if (pci_read_vpd (dev, off+1 ,2 , &header[1 ]) !=2 ) +return off +1 ; + off +=3 + ((header[2 ] <<8 ) | header[1 ]); + tag = (header[0 ] &0x7f ); + }else { +/* Short Resource Data Type Tag */ + off +=1 + (header[0 ] &0x07 ); + tag = (header[0 ] &0x78 ) >>3 ; + } +if (tag ==0x0f )/* End tag descriptor */ +break ; +if ((tag !=0x02 ) && (tag !=0x10 ) && (tag !=0x11 )) { +dev_debug (&dev->dev, +"invalid %s vpd tag %02x at offset %zu." , + header[0 ] &0x80 ?"large" :"short" , + tag, off); +break ; + } + } +return off; +} +int pci_vpd_pci22_init (struct pci_dev *dev) {struct pci_vpd_pci22 *vpd;
@@ -497,6 +539,13 @@ int pci_vpd_pci22_init(struct pci_dev *dev) vpd->cap = cap; vpd->busy = false; dev->vpd = &vpd->base; + vpd->base.len =pci_vpd_pci22_size (dev, vpd->base.len); +if (vpd->base.len ==0 ) { +dev_debug (&dev->dev,"Disabling VPD access." ); + dev->vpd =NULL ; +kfree (vpd); +return -ENXIO ; + }return 0 ; }
Signature · 1 line
1.8.5.6
kbuild test robot
build botreproduce:
Hi Hannes,
[auto build test ERROR on pci/next]
[also build test ERROR on v4.4-rc5 next-20151216]
url: https://github.com/0day-ci/linux/commits/Hannes-Reinecke/pci-Update-VPD-size-with-correct-length/20151216-183013 base: https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next config: x86_64-randconfig-x011-12141150 (attached as .config) reproduce: # save the attached .config to linux build tree make ARCH=x86_64
All errors (new ones prefixed by >>):
drivers/pci/access.c: In function 'pci_vpd_pci22_size':
>> drivers/pci/access.c:510:4: error: implicit declaration of function 'dev_debug' [-Werror=implicit-function-declaration]
dev_debug(&dev->dev,
^cc1: some warnings being treated as errors
vim +/dev_debug +510 drivers/pci/access.c
504 off += 1 + (header[0] & 0x07);
505 tag = (header[0] & 0x78) >> 3;
506 }
507 if (tag == 0x0f) /* End tag descriptor */
508 break;
509 if ((tag != 0x02) && (tag != 0x10) && (tag != 0x11)) {
> 510 dev_debug(&dev->dev, 511 "invalid %s vpd tag %02x at offset %zu.", 512 header[0] & 0x80 ? "large" : "short", 513 tag, off);
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation