python-rtimu: Add recipe to support RTIMULib
PATCH 1/2 python-rtimu: Add recipe to support RTIMULib
RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems. Python module for Raspberry Pi Sense HAT depends on it.
Python module python-rtimu uses the source code from the GitHub repository of RPi-Distro.
--- recipes-devtools/python/python-rtimu_git.bb | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 recipes-devtools/python/python-rtimu_git.bb
recipes-devtools/python/python-rtimu_git.bb new file +12 -0
@@ -0,0 +1,12 @@ +DESCRIPTION = "RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems" +HOMEPAGE = "https://github.com/RPi-Distro/RTIMULib/" +SECTION = "devel/python" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://../../LICENSE;md5=96cdecb41125f498958e09b72faf318e" + +SRC_URI = "git://github.com/RPi-Distro/RTIMULib.git;protocol=http;branch=master " +SRCREV = "b949681af69b45f0f7f4bb53b6770037b5b02178" + +S = "${WORKDIR}/git/Linux/python/" + +inherit setuptools
Signature · 1 line
2.5.0
PATCH 2/2 python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 recipes-devtools/python/python-sense-hat_2.1.0.bb
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +31 -0
@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission" +HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda" + +SRCNAME = "sense-hat" + +SRC_URI = "https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz" + +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] = "c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca" + +S = "${WORKDIR}/${SRCNAME}-${PV}" + +inherit setuptools + +DEPENDS_${PN} += " \ + jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + "
Signature · 1 line
2.5.0
Re: [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Quoted 25 lines · Leon Anavi
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 recipes-devtools/python/python-sense-hat_2.1.0.bbrecipes-devtools/python/python-sense-hat_2.1.0.bb new file +8
-0@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission" +HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda" + +SRCNAME = "sense-hat" +
recipes-devtools/python/python-sense-hat_2.1.0.bb line 18
Quoted 10 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +10
-0+SRC_URI = "https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz" + +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] = "c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca" + +S = "${WORKDIR}/${SRCNAME}-${PV}" + +inherit setuptools + +DEPENDS_${PN} += " \
Just use DEPENDS here and remove -dev entries below, its implied with DEPENDS
Quoted 21 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +13
-1+ jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + " --2.5.0
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Re: [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Quoted 35 lines · Khem Raj
Quoted 34 lines · Leon Anavi
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 recipes-devtools/python/python-sense-hat_2.1.0.bbrecipes-devtools/python/python-sense-hat_2.1.0.bb new file +1
-0@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HAT usedin the Astro Pi mission"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM ="file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+ +SRCNAME = "sense-hat" + +SRC_URI ="https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +3
-0+ +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] ="
c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"
Quoted 8 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb line 18
Quoted 6 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +6
-0+ +S = "${WORKDIR}/${SRCNAME}-${PV}" + +inherit setuptools + +DEPENDS_${PN} += " \Just use DEPENDS here and remove -dev entries below, its implied with DEPENDS
Done. I resubmitted this patch again. Thank you for the help.
Best regards, Leon
Quoted 22 lines
Quoted 22 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +13
-1+ jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + " --2.5.0
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
http://anavi.org/
Re: [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Quoted 51 lines · Leon Anavi
Quoted 40 lines · Khem Raj
Quoted 38 lines · Leon Anavi
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 recipes-devtools/python/python-sense-hat_2.1.0.bbrecipes-devtools/python/python-sense-hat_2.1.0.bb new file +1
-0@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HAT used inthe Astro Pi mission"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM ="file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+ +SRCNAME = "sense-hat" + +SRC_URI ="https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +3
-0+ +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] ="
c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"recipes-devtools/python/python-sense-hat_2.1.0.bb new file +2
-0+ +S = "${WORKDIR}/${SRCNAME}-${PV}"Quoted 8 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb line 18
Quoted 4 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+ +inherit setuptools + +DEPENDS_${PN} += " \Just use DEPENDS here and remove -dev entries below, its implied with DEPENDS
Quoted 2 lines
Done. I resubmitted this patch again. Thank you for the help.
Looks good now. Thx
Quoted 29 lines
Best regards, Leon
Quoted 17 lines
Quoted 17 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +13
-1+ jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + " --2.5.0
Quoted 5 lines
Quoted 5 lines
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Re: [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Quoted 54 lines · Khem Raj
Quoted 53 lines · Leon Anavi
Quoted 50 lines · Khem Raj
Quoted 38 lines · Leon Anavi
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644recipes-devtools/python/python-sense-hat_2.1.0.bb
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +1
-0@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HAT usedin
the Astro Pi mission"recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM ="file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+ +SRCNAME = "sense-hat" + +SRC_URI ="https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +3
-0+ +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] ="
c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"recipes-devtools/python/python-sense-hat_2.1.0.bb line 18
Quoted 6 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +6
-0+ +S = "${WORKDIR}/${SRCNAME}-${PV}" + +inherit setuptools + +DEPENDS_${PN} += " \Just use DEPENDS here and remove -dev entries below, its implied with DEPENDS
Quoted 4 lines
Quoted 2 lines
Done. I resubmitted this patch again. Thank you for the help.
Looks good now. Thx
It was my pleasure. Thanks again for the feedback.
Btw a quick and easy way to test the result on Raspberry Pi with a Sense HAT:
wget https://github.com/leon-anavi/python-sense-hat-scripts/archive/master.zip
unzip master.zip
cd python-sense-hat-scripts-master/
python python-sense-hat-text.py
If everything is OK you should see red text "Hello" scrolling on the LED matrix of the Sense HAT.
Best regards,
Leon
Quoted 30 lines
Quoted 30 lines
Best regards, Leon
Quoted 17 lines
Quoted 17 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +13
-1+ jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + " --2.5.0
Quoted 5 lines
Quoted 5 lines
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
http://anavi.org/
Re: [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Hi,
Kind reminder that I am still waiting for feedback regarding these two patches for Raspberry Pi Sense HAT.
Thanks, Leon
Quoted 105 lines · Leon Anavi
Quoted 54 lines · Khem Raj
Quoted 53 lines · Leon Anavi
Quoted 50 lines · Khem Raj
Quoted 38 lines · Leon Anavi
Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission. This recipe provides the officially supported library for the Sense HAT with access to all of the on-board sensors and the LED matrix.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-sense-hat_2.1.0.bb | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644recipes-devtools/python/python-sense-hat_2.1.0.bb
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +1
-0@@ -0,0 +1,31 @@ +SUMMARY = "Python module to control the Raspberry Pi Sense HATused in
the Astro Pi mission"recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat" +SECTION = "devel/python" +LICENSE = "BSD" +LIC_FILES_CHKSUM ="file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +4
-0+ +SRCNAME = "sense-hat" + +SRC_URI ="https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +3
-0+ +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca" +SRC_URI[sha256sum] ="
c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"recipes-devtools/python/python-sense-hat_2.1.0.bb line 18
Quoted 6 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +6
-0+ +S = "${WORKDIR}/${SRCNAME}-${PV}" + +inherit setuptools + +DEPENDS_${PN} += " \Just use DEPENDS here and remove -dev entries below, its implied with DEPENDS
Quoted 4 lines
Quoted 2 lines
Done. I resubmitted this patch again. Thank you for the help.
Looks good now. Thx
It was my pleasure. Thanks again for the feedback.
Btw a quick and easy way to test the result on Raspberry Pi with a Sense HAT:
wget https://github.com/leon-anavi/python-sense-hat-scripts/archive/master.zip
unzip master.zip
cd python-sense-hat-scripts-master/
pythonpython-sense-hat-text.pyIf everything is OK you should see red text "Hello" scrolling on the LED matrix of the Sense HAT.
Best regards,
LeonQuoted 30 lines
Quoted 30 lines
Best regards, Leon
Quoted 17 lines
Quoted 17 lines
recipes-devtools/python/python-sense-hat_2.1.0.bb new file +13
-1+ jpeg \ + jpeg-dev \ + zlib \ + zlib-dev \ + freetype \ + freetype-dev \ + " + +RDEPENDS_${PN} += " \ + python-numpy \ + python-rtimu \ + python-imaging \ + " --2.5.0
Quoted 5 lines
Quoted 5 lines
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
http://anavi.org/
Hi,
Quoted 4 lines · Leon Anavi
RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems. Python module for Raspberry Pi Sense HAT depends on it.
Quoted 8 lines
Python module python-rtimu uses the source code from the GitHub repository of RPi-Distro.
Signed-off-by Leon Anavi <[email protected]>--- recipes-devtools/python/python-rtimu_git.bb | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 recipes-devtools/python/python-rtimu_git.bb
Merged patch to master with some minor formatting tweaks (removed extra space in SRC_URI and broke DESCRIPTION line around 90 chars).
Thanks,
--
Andrei Gherzan
Hi Andrei,
Quoted 11 lines · Andrei Gherzan
Hi,
Quoted 7 lines · Leon Anavi
RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems. Python module for Raspberry Pi Sense HAT depends on it.
Python module python-rtimu uses the source code from the GitHub repository of RPi-Distro.
Quoted 9 lines
Quoted 5 lines
Signed-off-by Leon Anavi <[email protected]>---
recipes-devtools/python/python-rtimu_git.bb [1] | 12 ++++++++++++1 file changed, 12 insertions(+)create mode 100644 recipes-devtools/python/python-rtimu_git.bb [1]
Merged patch to master with some minor formatting tweaks (removed extra space in
SRC_URIand broke DESCRIPTION line around 90 chars).
Cool :) Thank you for merging my Raspberry Pi Sense HAT patches.
Best regards, Leon
Quoted 7 lines
Thanks,
--
Andrei GherzanLinks:
------
[1] http://python-rtimu_git.bb
Signature · 1 line
http://anavi.org/