drm/i915/huc: Support HuC authentication
Subsystems (2)
PATCH 6/6 drm/i915/huc: Support HuC authentication
From: Alex Dai <[email protected]>
The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication.
Signed-off-by Alex Dai <[email protected]>
Signed-off-by Peter Antoine <[email protected]>
--- drivers/gpu/drm/i915/i915_guc_submission.c | 65 ++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_guc_fwif.h | 1 + drivers/gpu/drm/i915/intel_guc_loader.c | 2 + 3 files changed, 68 insertions(+)
drivers/gpu/drm/i915/i915_guc_submission.c +65 -0
@@ -25,6 +25,7 @@#include <linux/circ_buf.h> #include "i915_drv.h" #include "intel_guc.h" +#include "intel_huc.h" /** * DOC: GuC-based command submission
@@ -1059,3 +1060,67 @@ int intel_guc_resume(struct drm_device *dev)return host2guc_action (guc, data,ARRAY_SIZE (data)); } + +/** +* intel_huc_ucode_auth() - authenticate ucode +* @dev: the drm device +* +* Triggers a HuC fw authentication request to the GuC via host-2-guc +* interface. +*/ +void intel_huc_ucode_auth (struct drm_device *dev) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +struct intel_guc *guc = &dev_priv->guc; +struct intel_huc *huc = &dev_priv->huc; +int ret; +u32 data[2 ]; + +/* Bypass the case where there is no HuC firmware */ +if (huc->huc_fw.fetch_status ==UC_FIRMWARE_NONE || + huc->huc_fw.load_status ==UC_FIRMWARE_NONE ) +return ; + +if (guc->guc_fw.load_status !=UC_FIRMWARE_SUCCESS ) { +DRM_ERROR ("HuC: GuC fw wasn't loaded. Can't authenticate" ); +return ; + } + +if (huc->huc_fw.load_status !=UC_FIRMWARE_SUCCESS ) { +DRM_ERROR ("HuC: fw wasn't loaded. Nothing to authenticate" ); +return ; + } + + ret =i915_gem_obj_ggtt_pin (huc->huc_fw.uc_fw_obj,0 ,0 ); +if (ret) { +DRM_ERROR ("HuC: Pin failed" ); +return ; + } + +/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */ +I915_WRITE (GEN8_GTCR ,GEN8_GTCR_INVALIDATE ); + +/* Specify auth action and where public signature is. It's stored +* at the beginning of the gem object, before the fw bits +*/ + data[0 ] =HOST2GUC_ACTION_AUTHENTICATE_HUC ; + data[1 ] =i915_gem_obj_ggtt_offset (huc->huc_fw.uc_fw_obj) + + huc->huc_fw.rsa_offset; + + ret =host2guc_action (guc, data,ARRAY_SIZE (data)); +if (ret) { +DRM_ERROR ("HuC: GuC did not ack Auth request\n" ); + goto out; + } + +/* Check authentication status, it should be done by now */ + ret =wait_for_atomic ( + (I915_READ (HUC_STATUS2 ) &HUC_FW_VERIFIED ) >0 ,5000 ); +if (ret) { +DRM_ERROR ("HuC: Authentication failed\n" ); + goto out; + } + +out: +i915_gem_object_ggtt_unpin (huc->huc_fw.uc_fw_obj); +}
drivers/gpu/drm/i915/intel_guc_fwif.h +1 -0
@@ -429,6 +429,7 @@ enum host2guc_action {HOST2GUC_ACTION_ENTER_S_STATE =0x501 ,HOST2GUC_ACTION_EXIT_S_STATE =0x502 ,HOST2GUC_ACTION_SLPC_REQUEST =0x3003 , +HOST2GUC_ACTION_AUTHENTICATE_HUC =0x4000 , HOST2GUC_ACTION_LIMIT };
drivers/gpu/drm/i915/intel_guc_loader.c +2 -0
@@ -424,6 +424,8 @@ int intel_guc_ucode_load(struct drm_device *dev)intel_uc_fw_status_repr (guc_fw->fetch_status), intel_uc_fw_status_repr(guc_fw->load_status)); +intel_huc_ucode_auth (dev); +if (i915.enable_guc_submission) {/* The execbuf_client will be recreated. Release it first. */ i915_guc_submission_disable (dev);
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx