ASoC: Add SPDIF support for Allwinner SoCs

From: Marcus Cooper <[email protected]>

This patch set adds support for the Allwinner SPDIF transceiver.

For now just the SPDIF transmitter has been tested on a Mele A2000(A10) and a Itead Ibox(A20).

In order for this patch set to be functional we require an audio clock patch which will be delivered separately. For those that are interested I've pushed the patches here with all the required changes to get SPDIF audio out of the device.

https://github.com/codekipper/linux-sunxi/commits/spdif_delivery

Thanks in advance,
CK

---
Changes since v4:
- corrected indentation issues
- removed old macros
- removed unnecessary enabling of apb clock

Changes since v3:
- removed code required for spdif capture
- added disable/enable of apb clk to suspend/resume.
- removed unnecessary dt checks in probe
- fixed error conditions in probe/resume
- modified pm_runtime functionality and confirmed that driver worked when PM was disabled.
- removed .owner from platform driver
- renamed bindings file

Changes since v2:
- removed sunxi-machine-spdif and replaced with simple audio card
- removed untested compatibilities from device tree documentation
- added pm_runtime and remove shutdown
- removed pll2 as it's the parent of the spdif clock
- rename clk to spdif_clk
- removed enabling of mclk output
- removed interrupts status being cleared as it's not being used
- use default fifo settings for now
- fixed alignments for wrapped lines

Changes since v1:
- Moved sunxi-machine-spdif.c to separate patch
- replaced sunxi in naming scheme with sun4i in the sun4i-spdif driver.
- split tx controller into separate enable/disable functions
- moved setclk and setfmt functionality into hw params
- added support for mono signals.
- cleaned up probe clock set up.
- removed all writes to transmit status registers.
- removed of_id
- removed power management code.
- Added support for more rates.

Marcus Cooper (2):
dt-bindings: sunxi :add sun4i SPDIF transceiver
ASoC: sunxi: Add support for the SPDIF block

 .../bindings/sound/sunxi,sun4i-spdif.txt           |  39 ++
 sound/soc/sunxi/Kconfig                            |   8 +
 sound/soc/sunxi/Makefile                           |   1 +
 sound/soc/sunxi/sun4i-spdif.c                      | 549 +++++++++++++++++++++
 4 files changed, 597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
 create mode 100644 sound/soc/sunxi/sun4i-spdif.c

2.7.1

From: Marcus Cooper <[email protected]>

Add devicetree bindings for the SPDIF transceiver found on found on Allwinners A10 and A20 SoCs.

---
 .../bindings/sound/sunxi,sun4i-spdif.txt           | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt

new file mode 100644
index 0000000..13503aa
@@ -0,0 +1,39 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+For now only playback is supported.
+
+Required properties:
+
+  - compatible		: should be one of the following:
+    - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Includes the following entries:
+	"apb"		  clock for the spdif bus.
+	"spdif"		  clock for spdif controller.
+
+Example:
+
+spdif: spdif@01c21000 {
+	compatible = "allwinner,sun4i-a10-spdif";
+	reg = <0x01c21000 0x40>;
+	interrupts = <13>;
+	clocks = <&apb0_gates 1>, <&spdif_clk>;
+	clock-names = "apb", "spdif";
+	dmas = <&dma 0 2>, <&dma 0 2>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};

2.7.1

From: Marcus Cooper <[email protected]>

The sun4i, sun5i and sun7i SoC families have an SPDIF block which is capable of playback and capture.

This patch enables the playback of this block for
the sun4i families.

---
 sound/soc/sunxi/Kconfig       |   8 +
 sound/soc/sunxi/Makefile      |   1 +
 sound/soc/sunxi/sun4i-spdif.c | 549 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 558 insertions(+)
 create mode 100644 sound/soc/sunxi/sun4i-spdif.c

index 84c72ec..ae42294 100644
@@ -8,4 +8,12 @@ config SND_SUN4I_CODEC
 	  Select Y or M to add support for the Codec embedded in the Allwinner
 	  A10 and affiliated SoCs.
 
+config SND_SUN4I_SPDIF
+	tristate "Allwinner A10 SPDIF Support"
+	depends on OF
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  Say Y or M to add support for the S/PDIF audio block in the Allwinner
+	  A10 and affiliated SoCs.
 endmenu

index ea8a08c..8f5e889 100644
@@ -1,2 +1,3 @@
 obj-$(CONFIG_SND_SUN4I_CODEC) += sun4i-codec.o
 
+obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o

2.7.1

NAK...last bunch of changes introduced a warning which slipped through, I'll fix that and send a new patch series. CK