Skip to contentSkip to conversation

OMAP3_logic: Add NAND args to boot UBIFS

PATCH New Adam Ford 2 participants 3 messages Feb 10, 2016 – Feb 15, 2016

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/1 OMAP3_logic: Add NAND args to boot UBIFS

With the recent addition of UBI support, this patch will add the preset parameters to allow for mouting an UBIFS from the 'fs' partition in NAND.

-V2: ubi.mtd=fs instead of ubi.mtd=4

Signed-off-by Adam Ford <[email protected]>
---
 include/configs/omap3_logic.h | 6 ++++++
 1 file changed, 6 insertions(+)
include/configs/omap3_logic.h +6 -0
index 9ea6ef3..fba2a12 100644
@@ -180,6 +180,8 @@
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
+	"nandrootfstype=ubifs rootwait\0" \
 	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \

@@ -221,6 +223,10 @@
 		"${optargs} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
+	"nandargs=run setconsole; setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
 	"fdtaddr=0x86000000\0" \
 	"loadfdtimage=mmc rescan; " \
 		"fatload mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
Signature · 1 line
1.9.1
#1 lore raw

PATCH v2 1/1 OMAP3_logic: Add NAND args to boot UBIFS

Quoted 6 lines · Adam Ford

With the recent addition of UBI support, this patch will add the preset parameters to allow for mouting an UBIFS from the 'fs' partition in NAND.

-V2: ubi.mtd=fs instead of ubi.mtd=4

Signed-off-by Adam Ford <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160210/ff65875e/attachment.sig>
#2 lore raw

PATCH v2 1/1 OMAP3_logic: Add NAND args to boot UBIFS

In reply to Adam Ford
Quoted 7 lines · Adam Ford

With the recent addition of UBI support, this patch will add the preset parameters to allow for mouting an UBIFS from the 'fs' partition in NAND.

-V2: ubi.mtd=fs instead of ubi.mtd=4

Signed-off-by Adam Ford <[email protected]>
Reviewed-by Tom Rini <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160215/82044b49/attachment.sig>