Skip to contentSkip to conversation

regulator: gpio: don't print error on EPROBE_DEFER

PATCH New Rabin Vincent 1 participant 1 message Feb 19, 2016 Voltage and current regulator framework

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: gpio: don't print error on EPROBE_DEFER

Don't print out an error with the driver sees EPROBE_DEFER when attempting to get the gpio. These errors are usually transient; the probe will be retried later.

---
 drivers/regulator/gpio-regulator.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/regulator/gpio-regulator.c +4 -2
index 7bba8b7..a8718e9 100644
@@ -283,8 +283,10 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 		drvdata->nr_gpios = config->nr_gpios;
 		ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
 		if (ret) {
-			dev_err(&pdev->dev,
-			"Could not obtain regulator setting GPIOs: %d\n", ret);
+			if (ret != -EPROBE_DEFER)
+				dev_err(&pdev->dev,
+					"Could not obtain regulator setting GPIOs: %d\n",
+					ret);
 			goto err_memstate;
 		}
 	}
Signature · 1 line
2.7.0