Skip to contentSkip to conversation

Patch "tty: Add support for PCIe WCH382 2S multi-IO card" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Feb 24, 2016

Subsystems (2)
Stable branch TTY layer and serial drivers
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

tty: Add support for PCIe WCH382 2S multi-IO card

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     tty-add-support-for-pcie-wch382-2s-multi-io-card.patch

and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 7dde55787b43a8f2b4021916db38d90c03a2ec64 Mon Sep 17 00:00:00 2001

From: Jeremy McNicoll <[email protected]>
Date: Tue, 2 Feb 2016 13:00:45 -0800
Subject: tty: Add support for PCIe WCH382 2S multi-IO card

From: Jeremy McNicoll <[email protected]>

commit 7dde55787b43a8f2b4021916db38d90c03a2ec64 upstream.

WCH382 2S board is a PCIe card with 2 DB9 COM ports detected as Serial controller: Device 1c00:3253 (rev 10) (prog-if 05 [16850])

Signed-off-by Jeremy McNicoll <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/tty/serial/8250/8250_pci.c +21 -0
@@ -1936,6 +1936,7 @@ pci_wch_ch38x_setup(struct serial_privat
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
+#define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
 #define PCI_VENDOR_ID_PERICOM			0x12D8
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951

@@ -2618,6 +2619,14 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
+	/* WCH CH382 2S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
 	/* WCH CH382 2S1P card (16850 clone) */
 	{
 		.vendor         = PCIE_VENDOR_ID_WCH,

@@ -2936,6 +2945,7 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_wch382_2,
 	pbn_wch384_4,
 	pbn_pericom_PI7C9X7951,
 	pbn_pericom_PI7C9X7952,

@@ -3756,6 +3766,13 @@ static struct pciserial_board pci_boards
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+	[pbn_wch382_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+		.first_offset	= 0xC0,
+	},
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,

@@ -5545,6 +5562,10 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch382_2 },
+
 	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/tty-add-support-for-pcie-wch382-2s-multi-io-card.patch queue-4.4/iommu-vt-d-don-t-skip-pci-devices-when-disabling-iotlb.patch