staging: dgnc: remove unneeded else
PATCH 1/4 staging: dgnc: remove unneeded else
If pci_enable_device() fails then we can return directly.
---
I saw there is some pending dgnc patch in outreachy, so this series might not apply. This series is based on staging-testing. I will resend v2 if it fails.
drivers/staging/dgnc/dgnc_driver.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/staging/dgnc/dgnc_driver.c +7 -7
@@ -283,13 +283,13 @@ static int dgnc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)/* wake up and enable device */ rc =pci_enable_device (pdev); -if (rc <0 ) { - rc = -EIO ; - }else { - rc =dgnc_found_board (pdev, ent->driver_data); -if (rc ==0 ) - dgnc_NumBoards++; - } +if (rc) +return -EIO ; + + rc =dgnc_found_board (pdev, ent->driver_data); +if (rc ==0 ) + dgnc_NumBoards++; +return rc; }
Signature · 1 line
1.9.1
PATCH 2/4 staging: dgnc: remove pci_unregister_driver
If pci_register_driver() fails then dgnc_NumBoards can never be more than zero. dgnc_NumBoards is incremented only at the end of a successful probe. And moreover if the pci driver has failed to register then we never need to unregister it. Lets just print the warning, perform the cleanup and exit with the error code.
--- drivers/staging/dgnc/dgnc_driver.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)
drivers/staging/dgnc/dgnc_driver.c +5 -14
@@ -181,23 +181,14 @@ static int __init dgnc_init_module(void)* Find and configure all the cards */ rc =pci_register_driver (&dgnc_driver); - -/* -* If something went wrong in the scan, bail out of driver. -*/ -if (rc <0 ) { -/* Only unregister if it was actually registered. */ -if (dgnc_NumBoards) -pci_unregister_driver (&dgnc_driver); -else -pr_warn ("WARNING: dgnc driver load failed. No Digi Neo or Classic boards found.\n" ); - +if (rc) { +pr_warn ("WARNING: dgnc driver load failed. No Digi Neo or Classic boards found.\n" );dgnc_cleanup_module (); - }else { -dgnc_create_driver_sysfiles (&dgnc_driver); +return rc; } +dgnc_create_driver_sysfiles (&dgnc_driver); -return rc; +return 0 ; }module_init (dgnc_init_module);
Signature · 1 line
1.9.1
PATCH 3/4 staging: dgnc: unregister pci driver
In reply to Sudip MukherjeeWe may choose to load the module without the hardware present. That will register the pci driver but since probe will not succeed so dgnc_NumBoards will be 0. Now if we unload the module then the pci driver stays registered as dgnc_NumBoards is 0. And if we try to load the module again it fails with the error:
"Driver 'dgnc' is already registered."
--- drivers/staging/dgnc/dgnc_driver.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/staging/dgnc/dgnc_driver.c +1 -2
@@ -156,8 +156,7 @@ static void dgnc_cleanup_module(void)dgnc_tty_post_uninit (); -if (dgnc_NumBoards) -pci_unregister_driver (&dgnc_driver); +pci_unregister_driver (&dgnc_driver); }/*
Signature · 1 line
1.9.1
PATCH 4/4 staging: dgnc: cleanup properly
In reply to Sudip Mukherjeedgnc_cleanup_module() was called when the module unloaded to do a total cleanup and it was also called if pci_register_driver() fails. But dgnc_cleanup_module() will try dgnc_remove_driver_sysfiles() but the sysfiles will be created only if pci_register_driver() succeeds. So if pci_register_driver() fails and we try dgnc_cleanup_module() then we were getting:
[ 942.001479] BUG: unable to handle kernel NULL pointer dereference at 00000018 [ 942.001482] IP: [<c122c7a8>] sysfs_remove_file_ns+0x8/0x20
with part of the call trace as:
[ 942.001544] Call Trace: [ 942.001555] [<c149acc6>] driver_remove_file+0x16/0x20 [ 942.001571] [<f864a708>] dgnc_remove_driver_sysfiles+0x18/0x40 [dgnc] [ 942.001575] [<f8643ac7>] dgnc_cleanup_module+0x47/0x260 [dgnc] [ 942.001577] [<f86cb000>] ? 0xf86cb000 [ 942.001580] [<f86cb1e6>] dgnc_init_module+0x1e6/0x1000 [dgnc]
Lets have a separate cleanup function which will execute dgnc_remove_driver_sysfiles() depending on the argument passed to it.
---
Hi Greg,
If you remember this problem was reported by Navy Cheng on the kernelnewbies list but his report did not contain the call trace. He just reported that his system hangs after reloading dgnc module.
drivers/staging/dgnc/dgnc_driver.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/staging/dgnc/dgnc_driver.c +13 -8
@@ -125,12 +125,7 @@ static struct pci_driver dgnc_driver = {* ************************************************************************/ -/* -* dgnc_cleanup_module() -* -* Module unload. This is where it all ends. -*/ -static void dgnc_cleanup_module (void ) +static void cleanup (bool sysfiles) {int i;unsigned long flags;
@@ -142,7 +137,8 @@ static void dgnc_cleanup_module(void)/* Turn off poller right away. */ del_timer_sync (&dgnc_poll_timer); -dgnc_remove_driver_sysfiles (&dgnc_driver); +if (sysfiles) +dgnc_remove_driver_sysfiles (&dgnc_driver);device_destroy (dgnc_class,MKDEV (dgnc_Major,0 ));class_destroy (dgnc_class);
@@ -155,7 +151,16 @@ static void dgnc_cleanup_module(void) }dgnc_tty_post_uninit (); +} +/* +* dgnc_cleanup_module() +* +* Module unload. This is where it all ends. +*/ +static void dgnc_cleanup_module (void ) +{ +cleanup (true);pci_unregister_driver (&dgnc_driver); }
@@ -182,7 +187,7 @@ static int __init dgnc_init_module(void) rc =pci_register_driver (&dgnc_driver);if (rc) {pr_warn ("WARNING: dgnc driver load failed. No Digi Neo or Classic boards found.\n" ); -dgnc_cleanup_module (); +cleanup (false);return rc; }dgnc_create_driver_sysfiles (&dgnc_driver);
Signature · 1 line
1.9.1