patch "USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder" added to usb-linus

This is a note to let you know that I've just added the patch titled

    USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: Vittorio Alfieri <[email protected]>
Date: Sun, 28 Feb 2016 14:40:24 +0100
Subject: USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder.

---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

index 7c319e7edda2..73a366de5102 100644
@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */

2.7.2