Skip to contentSkip to conversation

Patch "USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder" has been added to the 3.10-stable tree

PATCH [email protected] 1 participant 1 message Mar 7, 2016

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     usb-cp210x-add-id-for-parrot-nmea-gps-flight-recorder.patch

and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 3c4c615d70c8cbdc8ba8c79ed702640930652a79 Mon Sep 17 00:00:00 2001

From: Vittorio Alfieri <[email protected]>
Date: Sun, 28 Feb 2016 14:40:24 +0100
Subject: USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

From: Vittorio Alfieri <[email protected]>

commit 3c4c615d70c8cbdc8ba8c79ed702640930652a79 upstream.

The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder.

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/cp210x.c +1 -0
@@ -164,6 +164,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */

Patches currently in stable-queue which might be from [email protected] are

queue-3.10/usb-cp210x-add-id-for-parrot-nmea-gps-flight-recorder.patch