Shared pll improvements
Subsystems (2)
cover Shared pll improvements
Here's an updated patch series with Maarten's comments addressed. The last two patches also have fixes to please the state checker.
Thanks,
Ander
Ander Conselvan de Oliveira (13):
drm/i915: Move shared dpll code to a new file
drm/i915: Move ddi shared dpll code to intel_dpll_mgr.c drm/i915: Split intel_get_shared_dpll() into smaller functions drm/i915: Store a direct pointer to shared dpll in intel_crtc_state drm/i915: Move shared dpll struct definitions to separate header file drm/i915: Move shared dpll function prototypes to intel_dpll_mgr.h drm/i915: Use a table to initilize shared dplls
drm/i915: Refactor platform specifics out of intel_get_shared_dpll() drm/i915: Move HSW/BDW pll selection logic to intel_dpll_mgr.c drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c drm/i915: Move BXT pll configuration logic to intel_dpll_mgr.c drm/i915: Manage HSW/BDW LCPLLs with the shared dpll interface drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.h | 77 +- drivers/gpu/drm/i915/intel_crt.c | 8 +- drivers/gpu/drm/i915/intel_ddi.c | 1200 +--------------------- drivers/gpu/drm/i915/intel_display.c | 501 ++-------- drivers/gpu/drm/i915/intel_dp.c | 73 +- drivers/gpu/drm/i915/intel_dp_mst.c | 4 - drivers/gpu/drm/i915/intel_dpll_mgr.c | 1774 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dpll_mgr.h | 164 +++ drivers/gpu/drm/i915/intel_drv.h | 17 +- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 11 files changed, 2055 insertions(+), 1766 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dpll_mgr.c create mode 100644 drivers/gpu/drm/i915/intel_dpll_mgr.h
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/13 drm/i915: Move shared dpll code to a new file
Create the new file intel_dpll_mgr.c and move the shared dpll code to it. Follow up patches that reorganize pll handling will move more code there and tweak the interface.
No functional changes.
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_display.c | 348 +------------------------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 368 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 8 + 4 files changed, 379 insertions(+), 346 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dpll_mgr.c
drivers/gpu/drm/i915/Makefile +1 -0
@@ -56,6 +56,7 @@ i915-y += intel_audio.o \ intel_atomic_plane.o \ intel_bios.o \ intel_display.o \ + intel_dpll_mgr.o \ intel_fbc.o \ intel_fifo_underrun.o \ intel_frontbuffer.o \
drivers/gpu/drm/i915/intel_display.c +2 -346
378 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.c new file +368 -0
368 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +8 -0
@@ -1168,6 +1168,9 @@ intel_rotation_90_or_270(unsigned int rotation)void intel_create_rotation_property (struct drm_device *dev,struct intel_plane *plane); +void assert_pch_transcoder_disabled (struct drm_i915_private *dev_priv, +enum pipe pipe); +/* shared dpll functions */ struct intel_shared_dpll *intel_crtc_to_shared_dpll (struct intel_crtc *crtc); void assert_shared_dpll(struct drm_i915_private *dev_priv,
@@ -1177,6 +1180,11 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,#define assert_shared_dpll_disabled (d, p) assert_shared_dpll(d, p, false)struct intel_shared_dpll *intel_get_shared_dpll (struct intel_crtc *crtc,struct intel_crtc_state *state); +void intel_prepare_shared_dpll (struct intel_crtc *crtc); +void intel_enable_shared_dpll (struct intel_crtc *crtc); +void intel_disable_shared_dpll (struct intel_crtc *crtc); +void intel_shared_dpll_commit (struct drm_atomic_state *state); +void intel_shared_dpll_init (struct drm_device *dev);int vlv_force_pll_on (struct drm_device *dev,enum pipe pipe,const struct dpll *dpll);
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/13 drm/i915: Move ddi shared dpll code to intel_dpll_mgr.c
In reply to Ander Conselvan de OliveiraNo functional changes.
--- drivers/gpu/drm/i915/intel_ddi.c | 472 ---------------------------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 472 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 - 3 files changed, 472 insertions(+), 473 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +0 -472
@@ -2430,235 +2430,6 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder) } } -static void hsw_ddi_wrpll_enable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -I915_WRITE (WRPLL_CTL (pll->id), pll->config.hw_state.wrpll); -POSTING_READ (WRPLL_CTL (pll->id)); -udelay (20 ); -} - -static void hsw_ddi_spll_enable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -I915_WRITE (SPLL_CTL , pll->config.hw_state.spll); -POSTING_READ (SPLL_CTL ); -udelay (20 ); -} - -static void hsw_ddi_wrpll_disable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -uint32_t val; - - val =I915_READ (WRPLL_CTL (pll->id)); -I915_WRITE (WRPLL_CTL (pll->id), val & ~WRPLL_PLL_ENABLE ); -POSTING_READ (WRPLL_CTL (pll->id)); -} - -static void hsw_ddi_spll_disable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -uint32_t val; - - val =I915_READ (SPLL_CTL ); -I915_WRITE (SPLL_CTL , val & ~SPLL_PLL_ENABLE ); -POSTING_READ (SPLL_CTL ); -} - -static bool hsw_ddi_wrpll_get_hw_state (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -struct intel_dpll_hw_state *hw_state) -{ -uint32_t val; - -if (!intel_display_power_get_if_enabled (dev_priv,POWER_DOMAIN_PLLS )) -return false; - - val =I915_READ (WRPLL_CTL (pll->id)); - hw_state->wrpll = val; - -intel_display_power_put (dev_priv,POWER_DOMAIN_PLLS ); - -return val &WRPLL_PLL_ENABLE ; -} - -static bool hsw_ddi_spll_get_hw_state (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -struct intel_dpll_hw_state *hw_state) -{ -uint32_t val; - -if (!intel_display_power_get_if_enabled (dev_priv,POWER_DOMAIN_PLLS )) -return false; - - val =I915_READ (SPLL_CTL ); - hw_state->spll = val; - -intel_display_power_put (dev_priv,POWER_DOMAIN_PLLS ); - -return val &SPLL_PLL_ENABLE ; -} - - -static const char *const hsw_ddi_pll_names[] = { -"WRPLL 1" , -"WRPLL 2" , -"SPLL" -}; - -static void hsw_shared_dplls_init (struct drm_i915_private *dev_priv) -{ -int i; - - dev_priv->num_shared_dpll =3 ; - -for (i =0 ; i <2 ; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = hsw_ddi_wrpll_disable; - dev_priv->shared_dplls[i].enable = hsw_ddi_wrpll_enable; - dev_priv->shared_dplls[i].get_hw_state = - hsw_ddi_wrpll_get_hw_state; - } - -/* SPLL is special, but needs to be initialized anyway.. */ - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = hsw_ddi_spll_disable; - dev_priv->shared_dplls[i].enable = hsw_ddi_spll_enable; - dev_priv->shared_dplls[i].get_hw_state = hsw_ddi_spll_get_hw_state; - -} - -static const char *const skl_ddi_pll_names[] = { -"DPLL 1" , -"DPLL 2" , -"DPLL 3" , -}; - -struct skl_dpll_regs { -i915_reg_t ctl, cfgcr1, cfgcr2; -}; - -/* this array is indexed by the *shared* pll id */ -static const struct skl_dpll_regs skl_dpll_regs[3 ] = { - { -/* DPLL 1 */ - .ctl =LCPLL2_CTL , - .cfgcr1 =DPLL_CFGCR1 (SKL_DPLL1 ), - .cfgcr2 =DPLL_CFGCR2 (SKL_DPLL1 ), - }, - { -/* DPLL 2 */ - .ctl =WRPLL_CTL (0 ), - .cfgcr1 =DPLL_CFGCR1 (SKL_DPLL2 ), - .cfgcr2 =DPLL_CFGCR2 (SKL_DPLL2 ), - }, - { -/* DPLL 3 */ - .ctl =WRPLL_CTL (1 ), - .cfgcr1 =DPLL_CFGCR1 (SKL_DPLL3 ), - .cfgcr2 =DPLL_CFGCR2 (SKL_DPLL3 ), - }, -}; - -static void skl_ddi_pll_enable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -uint32_t val; -unsigned int dpll; -const struct skl_dpll_regs *regs = skl_dpll_regs; - -/* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */ - dpll = pll->id +1 ; - - val =I915_READ (DPLL_CTRL1 ); - - val &= ~(DPLL_CTRL1_HDMI_MODE (dpll) |DPLL_CTRL1_SSC (dpll) | -DPLL_CTRL1_LINK_RATE_MASK (dpll)); - val |= pll->config.hw_state.ctrl1 << (dpll *6 ); - -I915_WRITE (DPLL_CTRL1 , val); -POSTING_READ (DPLL_CTRL1 ); - -I915_WRITE (regs[pll->id].cfgcr1, pll->config.hw_state.cfgcr1); -I915_WRITE (regs[pll->id].cfgcr2, pll->config.hw_state.cfgcr2); -POSTING_READ (regs[pll->id].cfgcr1); -POSTING_READ (regs[pll->id].cfgcr2); - -/* the enable bit is always bit 31 */ -I915_WRITE (regs[pll->id].ctl, -I915_READ (regs[pll->id].ctl) |LCPLL_PLL_ENABLE ); - -if (wait_for (I915_READ (DPLL_STATUS ) &DPLL_LOCK (dpll),5 )) -DRM_ERROR ("DPLL %d not locked\n" , dpll); -} - -static void skl_ddi_pll_disable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -const struct skl_dpll_regs *regs = skl_dpll_regs; - -/* the enable bit is always bit 31 */ -I915_WRITE (regs[pll->id].ctl, -I915_READ (regs[pll->id].ctl) & ~LCPLL_PLL_ENABLE ); -POSTING_READ (regs[pll->id].ctl); -} - -static bool skl_ddi_pll_get_hw_state (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -struct intel_dpll_hw_state *hw_state) -{ -uint32_t val; -unsigned int dpll; -const struct skl_dpll_regs *regs = skl_dpll_regs; -bool ret; - -if (!intel_display_power_get_if_enabled (dev_priv,POWER_DOMAIN_PLLS )) -return false; - - ret = false; - -/* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */ - dpll = pll->id +1 ; - - val =I915_READ (regs[pll->id].ctl); -if (!(val &LCPLL_PLL_ENABLE )) - goto out; - - val =I915_READ (DPLL_CTRL1 ); - hw_state->ctrl1 = (val >> (dpll *6 )) &0x3f ; - -/* avoid reading back stale values if HDMI mode is not enabled */ -if (val &DPLL_CTRL1_HDMI_MODE (dpll)) { - hw_state->cfgcr1 =I915_READ (regs[pll->id].cfgcr1); - hw_state->cfgcr2 =I915_READ (regs[pll->id].cfgcr2); - } - ret = true; - -out: -intel_display_power_put (dev_priv,POWER_DOMAIN_PLLS ); - -return ret; -} - -static void skl_shared_dplls_init (struct drm_i915_private *dev_priv) -{ -int i; - - dev_priv->num_shared_dpll =3 ; - -for (i =0 ; i < dev_priv->num_shared_dpll; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = skl_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = skl_ddi_pll_disable; - dev_priv->shared_dplls[i].enable = skl_ddi_pll_enable; - dev_priv->shared_dplls[i].get_hw_state = - skl_ddi_pll_get_hw_state; - } -} -static void broxton_phy_init (struct drm_i915_private *dev_priv,enum dpio_phy phy) {
@@ -2783,249 +2554,6 @@ void broxton_ddi_phy_uninit(struct drm_device *dev)I915_WRITE (BXT_P_CR_GT_DISP_PWRON ,0 ); } -static const char *const bxt_ddi_pll_names[] = { -"PORT PLL A" , -"PORT PLL B" , -"PORT PLL C" , -}; - -static void bxt_ddi_pll_enable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -uint32_t temp; -enum port port = (enum port )pll->id;/* 1:1 port->PLL mapping */ - - temp =I915_READ (BXT_PORT_PLL_ENABLE (port)); - temp &= ~PORT_PLL_REF_SEL ; -/* Non-SSC reference */ -I915_WRITE (BXT_PORT_PLL_ENABLE (port), temp); - -/* Disable 10 bit clock */ - temp =I915_READ (BXT_PORT_PLL_EBB_4 (port)); - temp &= ~PORT_PLL_10BIT_CLK_ENABLE ; -I915_WRITE (BXT_PORT_PLL_EBB_4 (port), temp); - -/* Write P1 & P2 */ - temp =I915_READ (BXT_PORT_PLL_EBB_0 (port)); - temp &= ~(PORT_PLL_P1_MASK |PORT_PLL_P2_MASK ); - temp |= pll->config.hw_state.ebb0; -I915_WRITE (BXT_PORT_PLL_EBB_0 (port), temp); - -/* Write M2 integer */ - temp =I915_READ (BXT_PORT_PLL (port,0 )); - temp &= ~PORT_PLL_M2_MASK ; - temp |= pll->config.hw_state.pll0; -I915_WRITE (BXT_PORT_PLL (port,0 ), temp); - -/* Write N */ - temp =I915_READ (BXT_PORT_PLL (port,1 )); - temp &= ~PORT_PLL_N_MASK ; - temp |= pll->config.hw_state.pll1; -I915_WRITE (BXT_PORT_PLL (port,1 ), temp); - -/* Write M2 fraction */ - temp =I915_READ (BXT_PORT_PLL (port,2 )); - temp &= ~PORT_PLL_M2_FRAC_MASK ; - temp |= pll->config.hw_state.pll2; -I915_WRITE (BXT_PORT_PLL (port,2 ), temp); - -/* Write M2 fraction enable */ - temp =I915_READ (BXT_PORT_PLL (port,3 )); - temp &= ~PORT_PLL_M2_FRAC_ENABLE ; - temp |= pll->config.hw_state.pll3; -I915_WRITE (BXT_PORT_PLL (port,3 ), temp); - -/* Write coeff */ - temp =I915_READ (BXT_PORT_PLL (port,6 )); - temp &= ~PORT_PLL_PROP_COEFF_MASK ; - temp &= ~PORT_PLL_INT_COEFF_MASK ; - temp &= ~PORT_PLL_GAIN_CTL_MASK ; - temp |= pll->config.hw_state.pll6; -I915_WRITE (BXT_PORT_PLL (port,6 ), temp); - -/* Write calibration val */ - temp =I915_READ (BXT_PORT_PLL (port,8 )); - temp &= ~PORT_PLL_TARGET_CNT_MASK ; - temp |= pll->config.hw_state.pll8; -I915_WRITE (BXT_PORT_PLL (port,8 ), temp); - - temp =I915_READ (BXT_PORT_PLL (port,9 )); - temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK ; - temp |= pll->config.hw_state.pll9; -I915_WRITE (BXT_PORT_PLL (port,9 ), temp); - - temp =I915_READ (BXT_PORT_PLL (port,10 )); - temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H ; - temp &= ~PORT_PLL_DCO_AMP_MASK ; - temp |= pll->config.hw_state.pll10; -I915_WRITE (BXT_PORT_PLL (port,10 ), temp); - -/* Recalibrate with new settings */ - temp =I915_READ (BXT_PORT_PLL_EBB_4 (port)); - temp |=PORT_PLL_RECALIBRATE ; -I915_WRITE (BXT_PORT_PLL_EBB_4 (port), temp); - temp &= ~PORT_PLL_10BIT_CLK_ENABLE ; - temp |= pll->config.hw_state.ebb4; -I915_WRITE (BXT_PORT_PLL_EBB_4 (port), temp); - -/* Enable PLL */ - temp =I915_READ (BXT_PORT_PLL_ENABLE (port)); - temp |=PORT_PLL_ENABLE ; -I915_WRITE (BXT_PORT_PLL_ENABLE (port), temp); -POSTING_READ (BXT_PORT_PLL_ENABLE (port)); - -if (wait_for_atomic_us ((I915_READ (BXT_PORT_PLL_ENABLE (port)) & -PORT_PLL_LOCK ),200 )) -DRM_ERROR ("PLL %d not locked\n" , port); - -/* -* While we write to the group register to program all lanes at once we -* can read only lane registers and we pick lanes 0/1 for that. -*/ - temp =I915_READ (BXT_PORT_PCS_DW12_LN01 (port)); - temp &= ~LANE_STAGGER_MASK ; - temp &= ~LANESTAGGER_STRAP_OVRD ; - temp |= pll->config.hw_state.pcsdw12; -I915_WRITE (BXT_PORT_PCS_DW12_GRP (port), temp); -} - -static void bxt_ddi_pll_disable (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll) -{ -enum port port = (enum port )pll->id;/* 1:1 port->PLL mapping */ -uint32_t temp; - - temp =I915_READ (BXT_PORT_PLL_ENABLE (port)); - temp &= ~PORT_PLL_ENABLE ; -I915_WRITE (BXT_PORT_PLL_ENABLE (port), temp); -POSTING_READ (BXT_PORT_PLL_ENABLE (port)); -} - -static bool bxt_ddi_pll_get_hw_state (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -struct intel_dpll_hw_state *hw_state) -{ -enum port port = (enum port )pll->id;/* 1:1 port->PLL mapping */ -uint32_t val; -bool ret; - -if (!intel_display_power_get_if_enabled (dev_priv,POWER_DOMAIN_PLLS )) -return false; - - ret = false; - - val =I915_READ (BXT_PORT_PLL_ENABLE (port)); -if (!(val &PORT_PLL_ENABLE )) - goto out; - - hw_state->ebb0 =I915_READ (BXT_PORT_PLL_EBB_0 (port)); - hw_state->ebb0 &=PORT_PLL_P1_MASK |PORT_PLL_P2_MASK ; - - hw_state->ebb4 =I915_READ (BXT_PORT_PLL_EBB_4 (port)); - hw_state->ebb4 &=PORT_PLL_10BIT_CLK_ENABLE ; - - hw_state->pll0 =I915_READ (BXT_PORT_PLL (port,0 )); - hw_state->pll0 &=PORT_PLL_M2_MASK ; - - hw_state->pll1 =I915_READ (BXT_PORT_PLL (port,1 )); - hw_state->pll1 &=PORT_PLL_N_MASK ; - - hw_state->pll2 =I915_READ (BXT_PORT_PLL (port,2 )); - hw_state->pll2 &=PORT_PLL_M2_FRAC_MASK ; - - hw_state->pll3 =I915_READ (BXT_PORT_PLL (port,3 )); - hw_state->pll3 &=PORT_PLL_M2_FRAC_ENABLE ; - - hw_state->pll6 =I915_READ (BXT_PORT_PLL (port,6 )); - hw_state->pll6 &=PORT_PLL_PROP_COEFF_MASK | -PORT_PLL_INT_COEFF_MASK | -PORT_PLL_GAIN_CTL_MASK ; - - hw_state->pll8 =I915_READ (BXT_PORT_PLL (port,8 )); - hw_state->pll8 &=PORT_PLL_TARGET_CNT_MASK ; - - hw_state->pll9 =I915_READ (BXT_PORT_PLL (port,9 )); - hw_state->pll9 &=PORT_PLL_LOCK_THRESHOLD_MASK ; - - hw_state->pll10 =I915_READ (BXT_PORT_PLL (port,10 )); - hw_state->pll10 &=PORT_PLL_DCO_AMP_OVR_EN_H | -PORT_PLL_DCO_AMP_MASK ; - -/* -* While we write to the group register to program all lanes at once we -* can read only lane registers. We configure all lanes the same way, so -* here just read out lanes 0/1 and output a note if lanes 2/3 differ. -*/ - hw_state->pcsdw12 =I915_READ (BXT_PORT_PCS_DW12_LN01 (port)); -if (I915_READ (BXT_PORT_PCS_DW12_LN23 (port)) != hw_state->pcsdw12) -DRM_DEBUG_DRIVER ("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n" , - hw_state->pcsdw12, -I915_READ (BXT_PORT_PCS_DW12_LN23 (port))); - hw_state->pcsdw12 &=LANE_STAGGER_MASK |LANESTAGGER_STRAP_OVRD ; - - ret = true; - -out: -intel_display_power_put (dev_priv,POWER_DOMAIN_PLLS ); - -return ret; -} - -static void bxt_shared_dplls_init (struct drm_i915_private *dev_priv) -{ -int i; - - dev_priv->num_shared_dpll =3 ; - -for (i =0 ; i < dev_priv->num_shared_dpll; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = bxt_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = bxt_ddi_pll_disable; - dev_priv->shared_dplls[i].enable = bxt_ddi_pll_enable; - dev_priv->shared_dplls[i].get_hw_state = - bxt_ddi_pll_get_hw_state; - } -} - -void intel_ddi_pll_init (struct drm_device *dev) -{ -struct drm_i915_private *dev_priv = dev->dev_private; -uint32_t val =I915_READ (LCPLL_CTL ); - -if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) -skl_shared_dplls_init (dev_priv); -else if (IS_BROXTON (dev)) -bxt_shared_dplls_init (dev_priv); -else -hsw_shared_dplls_init (dev_priv); - -if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) { -int cdclk_freq; - - cdclk_freq = dev_priv->display.get_display_clock_speed (dev); - dev_priv->skl_boot_cdclk = cdclk_freq; -if (skl_sanitize_cdclk (dev_priv)) -DRM_DEBUG_KMS ("Sanitized cdclk programmed by pre-os\n" ); -if (!(I915_READ (LCPLL1_CTL ) &LCPLL_PLL_ENABLE )) -DRM_ERROR ("LCPLL1 is disabled\n" ); - }else if (IS_BROXTON (dev)) { -broxton_init_cdclk (dev); -broxton_ddi_phy_init (dev); - }else { -/* -* The LCPLL register should be turned on by the BIOS. For now -* let's just check its state and print errors in case -* something is wrong. Don't even try to turn it on. -*/ - -if (val &LCPLL_CD_SOURCE_FCLK ) -DRM_ERROR ("CDCLK source is not LCPLL\n" ); - -if (val &LCPLL_PLL_DISABLE ) -DRM_ERROR ("LCPLL is disabled\n" ); - } -} -void intel_ddi_prepare_link_retrain (struct intel_dp *intel_dp) {struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp);
drivers/gpu/drm/i915/intel_dpll_mgr.c +472 -0
478 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +0 -1
@@ -1031,7 +1031,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc);void intel_ddi_init (struct drm_device *dev,enum port port);enum port intel_ddi_get_encoder_port (struct intel_encoder *intel_encoder);bool intel_ddi_get_hw_state (struct intel_encoder *encoder,enum pipe *pipe); -void intel_ddi_pll_init (struct drm_device *dev);void intel_ddi_enable_transcoder_func (struct drm_crtc *crtc);void intel_ddi_disable_transcoder_func (struct drm_i915_private *dev_priv,enum transcoder cpu_transcoder);
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/13 drm/i915: Split intel_get_shared_dpll() into smaller functions
In reply to Ander Conselvan de OliveiraMake the code neater by splitting the code for platforms with fixed PLL to their own functions and splitting the logic for finding a shareable or unused pll from the logic for setting it up.
--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 109 +++++++++++++++++++++++----------- 1 file changed, 74 insertions(+), 35 deletions(-)
drivers/gpu/drm/i915/intel_dpll_mgr.c +74 -35
@@ -145,52 +145,65 @@ void intel_disable_shared_dpll(struct intel_crtc *crtc)intel_display_power_put (dev_priv,POWER_DOMAIN_PLLS ); } -struct intel_shared_dpll *intel_get_shared_dpll (struct intel_crtc *crtc, -struct intel_crtc_state *crtc_state) +static enum intel_dpll_id +ibx_get_fixed_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *crtc_state) { -struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);struct intel_shared_dpll *pll; -struct intel_shared_dpll_config *shared_dpll;enum intel_dpll_id i; -int max = dev_priv->num_shared_dpll; - shared_dpll =intel_atomic_get_shared_dpll_state (crtc_state->base.state); +/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ + i = (enum intel_dpll_id ) crtc->pipe; + pll = &dev_priv->shared_dplls[i]; -if (HAS_PCH_IBX (dev_priv->dev)) { -/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ - i = (enum intel_dpll_id ) crtc->pipe; - pll = &dev_priv->shared_dplls[i]; +DRM_DEBUG_KMS ("CRTC:%d using pre-allocated %s\n" , + crtc->base.base.id, pll->name); -DRM_DEBUG_KMS ("CRTC:%d using pre-allocated %s\n" , - crtc->base.base.id, pll->name); +return i; +} -WARN_ON (shared_dpll[i].crtc_mask); +static enum intel_dpll_id +bxt_get_fixed_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *crtc_state) +{ +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +struct intel_encoder *encoder; +struct intel_digital_port *intel_dig_port; +struct intel_shared_dpll *pll; +enum intel_dpll_id i; - goto found; - } +/* PLL is attached to port in bxt */ + encoder =intel_ddi_get_crtc_new_encoder (crtc_state); +if (WARN_ON (!encoder)) +return DPLL_ID_PRIVATE ; -if (IS_BROXTON (dev_priv->dev)) { -/* PLL is attached to port in bxt */ -struct intel_encoder *encoder; -struct intel_digital_port *intel_dig_port; + intel_dig_port =enc_to_dig_port (&encoder->base); +/* 1:1 mapping between ports and PLLs */ + i = (enum intel_dpll_id )intel_dig_port->port; + pll = &dev_priv->shared_dplls[i]; +DRM_DEBUG_KMS ("CRTC:%d using pre-allocated %s\n" , + crtc->base.base.id, pll->name); - encoder =intel_ddi_get_crtc_new_encoder (crtc_state); -if (WARN_ON (!encoder)) -return NULL ; +return i; +} - intel_dig_port =enc_to_dig_port (&encoder->base); -/* 1:1 mapping between ports and PLLs */ - i = (enum intel_dpll_id )intel_dig_port->port; - pll = &dev_priv->shared_dplls[i]; -DRM_DEBUG_KMS ("CRTC:%d using pre-allocated %s\n" , - crtc->base.base.id, pll->name); -WARN_ON (shared_dpll[i].crtc_mask); +static enum intel_dpll_id +intel_find_shared_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *crtc_state) +{ +struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; +struct intel_shared_dpll *pll; +struct intel_shared_dpll_config *shared_dpll; +enum intel_dpll_id i; +int max = dev_priv->num_shared_dpll; - goto found; - }else if (INTEL_INFO (dev_priv)->gen <9 &&HAS_DDI (dev_priv)) +if (INTEL_INFO (dev_priv)->gen <9 &&HAS_DDI (dev_priv))/* Do not consider SPLL */ max =2 ; + shared_dpll =intel_atomic_get_shared_dpll_state (crtc_state->base.state); +for (i =0 ; i < max; i++) { pll = &dev_priv->shared_dplls[i];
@@ -205,7 +218,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, crtc->base.base.id, pll->name, shared_dpll[i].crtc_mask, pll->active); - goto found; +return i; } }
@@ -215,13 +228,39 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,if (shared_dpll[i].crtc_mask ==0 ) {DRM_DEBUG_KMS ("CRTC:%d allocated %s\n" , crtc->base.base.id, pll->name); - goto found; +return i; } } -return NULL ; +return DPLL_ID_PRIVATE ; +} + +struct intel_shared_dpll * +intel_get_shared_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *crtc_state) +{ +struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; +struct intel_shared_dpll *pll; +struct intel_shared_dpll_config *shared_dpll; +enum intel_dpll_id i; + + shared_dpll =intel_atomic_get_shared_dpll_state (crtc_state->base.state); + +if (HAS_PCH_IBX (dev_priv->dev)) { + i =ibx_get_fixed_dpll (crtc, crtc_state); +WARN_ON (shared_dpll[i].crtc_mask); + }else if (IS_BROXTON (dev_priv->dev)) { + i =bxt_get_fixed_dpll (crtc, crtc_state); +WARN_ON (shared_dpll[i].crtc_mask); + }else { + i =intel_find_shared_dpll (crtc, crtc_state); + } + +if (i <0 ) +return NULL ; + + pll = &dev_priv->shared_dplls[i]; -found:if (shared_dpll[i].crtc_mask ==0 ) shared_dpll[i].hw_state = crtc_state->dpll_hw_state;
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/13 drm/i915: Store a direct pointer to shared dpll in intel_crtc_state
In reply to Ander Conselvan de OliveiraChange the type of intel_crtc_state->shared_dpll to be a pointer to a shared dpll. With this there is no need to first convert the id stored in the crtc state to a pointer in order to use it. It does introduce a bit of hassle on doing the opposite.
The long term objective is to hide details about dpll ids behind the shared dpll interface.
--- drivers/gpu/drm/i915/intel_ddi.c | 4 +- drivers/gpu/drm/i915/intel_display.c | 108 ++++++++++++++++++++++------------ drivers/gpu/drm/i915/intel_dpll_mgr.c | 51 ++++++++++++---- drivers/gpu/drm/i915/intel_drv.h | 19 +++++- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 5 files changed, 132 insertions(+), 52 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +3 -1
@@ -1209,6 +1209,7 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);int clock = crtc_state->port_clock;if (intel_encoder->type ==INTEL_OUTPUT_HDMI ) {
@@ -1244,7 +1245,8 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc, WARN_ON(spll->hw_state.spll != crtc_state->dpll_hw_state.spll))return false; - crtc_state->shared_dpll =DPLL_ID_SPLL ; + crtc_state->shared_dpll = +intel_get_shared_dpll_by_id (dev_priv,DPLL_ID_SPLL ); spll->hw_state.spll = crtc_state->dpll_hw_state.spll; spll->crtc_mask |=1 << intel_crtc->pipe; }
drivers/gpu/drm/i915/intel_display.c +72 -36
287 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.c +40 -11
93 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +16 -3
@@ -448,8 +448,8 @@ struct intel_crtc_state {* haswell. */ struct dpll dpll; -/* Selected dpll when shared or DPLL_ID_PRIVATE. */ -enum intel_dpll_id shared_dpll; +/* Selected dpll when shared or NULL. */ +struct intel_shared_dpll *shared_dpll;/* * - PORT_CLK_SEL for DDI ports on HSW/BDW.
@@ -1171,7 +1171,20 @@ void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, enum pipe pipe);/* shared dpll functions */ -struct intel_shared_dpll *intel_crtc_to_shared_dpll (struct intel_crtc *crtc); +struct intel_shared_dpll * +intel_get_shared_dpll_by_id (struct drm_i915_private *dev_priv, +enum intel_dpll_id id); +enum intel_dpll_id +intel_get_shared_dpll_id (struct drm_i915_private *dev_priv, +struct intel_shared_dpll *pll); +void +intel_shared_dpll_config_get (struct intel_shared_dpll_config *config, +struct intel_shared_dpll *pll, +struct intel_crtc *crtc); +void +intel_shared_dpll_config_put (struct intel_shared_dpll_config *config, +struct intel_shared_dpll *pll, +struct intel_crtc *crtc);void assert_shared_dpll (struct drm_i915_private *dev_priv,struct intel_shared_dpll *pll,bool state);
drivers/gpu/drm/i915/intel_lvds.c +1 -1
@@ -145,7 +145,7 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)if (HAS_PCH_SPLIT (dev)) {assert_fdi_rx_pll_disabled (dev_priv, pipe);assert_shared_dpll_disabled (dev_priv, -intel_crtc_to_shared_dpll (crtc)); + crtc->config->shared_dpll); }else {assert_pll_disabled (dev_priv, pipe); }
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/13 drm/i915: Move shared dpll struct definitions to separate header file
In reply to Ander Conselvan de OliveiraMove the declarations related to shared dplls from i915_drv.h to their own header file.
The code that became the shared dpll infrastructre was first introcude in commit ee7b9f93fd96 ("drm/i915: manage PCH PLLs separately from pipes"), hence the 2012-2016 copyright years in the new header file.
--- drivers/gpu/drm/i915/i915_drv.h | 76 +----------------------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 106 ++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+), 75 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dpll_mgr.h
drivers/gpu/drm/i915/i915_drv.h +1 -75
@@ -53,6 +53,7 @@#include <linux/kref.h> #include <linux/pm_qos.h> #include "intel_guc.h" +#include "intel_dpll_mgr.h" /* General customization: */
@@ -340,81 +341,6 @@ struct drm_i915_file_private {unsigned int bsd_ring; }; -enum intel_dpll_id { -DPLL_ID_PRIVATE =-1 ,/* non-shared dpll in use */ -/* real shared dpll ids must be >= 0 */ -DPLL_ID_PCH_PLL_A =0 , -DPLL_ID_PCH_PLL_B =1 , -/* hsw/bdw */ -DPLL_ID_WRPLL1 =0 , -DPLL_ID_WRPLL2 =1 , -DPLL_ID_SPLL =2 , - -/* skl */ -DPLL_ID_SKL_DPLL1 =0 , -DPLL_ID_SKL_DPLL2 =1 , -DPLL_ID_SKL_DPLL3 =2 , -}; -#define I915_NUM_PLLS 3 - -struct intel_dpll_hw_state { -/* i9xx, pch plls */ -uint32_t dpll; -uint32_t dpll_md; -uint32_t fp0; -uint32_t fp1; - -/* hsw, bdw */ -uint32_t wrpll; -uint32_t spll; - -/* skl */ -/* -* DPLL_CTRL1 has 6 bits for each each this DPLL. We store those in -* lower part of ctrl1 and they get shifted into position when writing -* the register. This allows us to easily compare the state to share -* the DPLL. -*/ -uint32_t ctrl1; -/* HDMI only, 0 when used for DP */ -uint32_t cfgcr1, cfgcr2; - -/* bxt */ -uint32_t ebb0, ebb4, pll0, pll1, pll2, pll3, pll6, pll8, pll9, pll10, - pcsdw12; -}; - -struct intel_shared_dpll_config { -unsigned crtc_mask;/* mask of CRTCs sharing this PLL */ -struct intel_dpll_hw_state hw_state; -}; - -struct intel_shared_dpll { -struct intel_shared_dpll_config config; - -int active;/* count of number of active CRTCs (i.e. DPMS on) */ -bool on;/* is the PLL actually active? Disabled during modeset */ -const char *name; -/* should match the index in the dev_priv->shared_dplls array */ -enum intel_dpll_id id; -/* The mode_set hook is optional and should be used together with the -* intel_prepare_shared_dpll function. */ -void (*mode_set)(struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll); -void (*enable)(struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll); -void (*disable)(struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll); -bool (*get_hw_state)(struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -struct intel_dpll_hw_state *hw_state); -}; - -#define SKL_DPLL0 0 -#define SKL_DPLL1 1 -#define SKL_DPLL2 2 -#define SKL_DPLL3 3 -/* Used by dp and fdi links */ struct intel_link_m_n {uint32_t tu;
drivers/gpu/drm/i915/intel_dpll_mgr.h new file +106 -0
106 lines not on this page · raw message
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/13 drm/i915: Move shared dpll function prototypes to intel_dpll_mgr.h
In reply to Ander Conselvan de OliveiraMove shared dpll function prototype together with other shared dpll definitions.
--- drivers/gpu/drm/i915/intel_dpll_mgr.h | 30 ++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 28 ---------------------------- 2 files changed, 30 insertions(+), 28 deletions(-)
drivers/gpu/drm/i915/intel_dpll_mgr.h +30 -0
@@ -26,6 +26,8 @@#define _INTEL_DPLL_MGR_H_struct drm_i915_private ; +struct intel_crtc ; +struct intel_crtc_state ;enum intel_dpll_id {DPLL_ID_PRIVATE =-1 ,/* non-shared dpll in use */
@@ -102,5 +104,33 @@ struct intel_shared_dpll {#define SKL_DPLL2 2#define SKL_DPLL3 3 +/* shared dpll functions */ +struct intel_shared_dpll * +intel_get_shared_dpll_by_id (struct drm_i915_private *dev_priv, +enum intel_dpll_id id); +enum intel_dpll_id +intel_get_shared_dpll_id (struct drm_i915_private *dev_priv, +struct intel_shared_dpll *pll); +void +intel_shared_dpll_config_get (struct intel_shared_dpll_config *config, +struct intel_shared_dpll *pll, +struct intel_crtc *crtc); +void +intel_shared_dpll_config_put (struct intel_shared_dpll_config *config, +struct intel_shared_dpll *pll, +struct intel_crtc *crtc); +void assert_shared_dpll (struct drm_i915_private *dev_priv, +struct intel_shared_dpll *pll, +bool state); +#define assert_shared_dpll_enabled (d, p) assert_shared_dpll(d, p, true) +#define assert_shared_dpll_disabled (d, p) assert_shared_dpll(d, p, false) +struct intel_shared_dpll *intel_get_shared_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *state); +void intel_prepare_shared_dpll (struct intel_crtc *crtc); +void intel_enable_shared_dpll (struct intel_crtc *crtc); +void intel_disable_shared_dpll (struct intel_crtc *crtc); +void intel_shared_dpll_commit (struct drm_atomic_state *state); +void intel_shared_dpll_init (struct drm_device *dev); +#endif /* _INTEL_DPLL_MGR_H_ */
drivers/gpu/drm/i915/intel_drv.h +0 -28
@@ -1170,34 +1170,6 @@ void intel_create_rotation_property(struct drm_device *dev,void assert_pch_transcoder_disabled (struct drm_i915_private *dev_priv,enum pipe pipe); -/* shared dpll functions */ -struct intel_shared_dpll * -intel_get_shared_dpll_by_id (struct drm_i915_private *dev_priv, -enum intel_dpll_id id); -enum intel_dpll_id -intel_get_shared_dpll_id (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll); -void -intel_shared_dpll_config_get (struct intel_shared_dpll_config *config, -struct intel_shared_dpll *pll, -struct intel_crtc *crtc); -void -intel_shared_dpll_config_put (struct intel_shared_dpll_config *config, -struct intel_shared_dpll *pll, -struct intel_crtc *crtc); -void assert_shared_dpll (struct drm_i915_private *dev_priv, -struct intel_shared_dpll *pll, -bool state); -#define assert_shared_dpll_enabled (d, p) assert_shared_dpll(d, p, true) -#define assert_shared_dpll_disabled (d, p) assert_shared_dpll(d, p, false) -struct intel_shared_dpll *intel_get_shared_dpll (struct intel_crtc *crtc, -struct intel_crtc_state *state); -void intel_prepare_shared_dpll (struct intel_crtc *crtc); -void intel_enable_shared_dpll (struct intel_crtc *crtc); -void intel_disable_shared_dpll (struct intel_crtc *crtc); -void intel_shared_dpll_commit (struct drm_atomic_state *state); -void intel_shared_dpll_init (struct drm_device *dev); -int vlv_force_pll_on (struct drm_device *dev,enum pipe pipe,const struct dpll *dpll);void vlv_force_pll_off (struct drm_device *dev,enum pipe pipe);
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/13 drm/i915: Use a table to initilize shared dplls
In reply to Ander Conselvan de OliveiraUse a table to store the per-platform shared dpll information in one place. This way, there is no need for platform specific init funtions.
--- drivers/gpu/drm/i915/intel_display.c | 16 +-- drivers/gpu/drm/i915/intel_dpll_mgr.c | 189 ++++++++++++++++------------------ drivers/gpu/drm/i915/intel_dpll_mgr.h | 22 ++-- 3 files changed, 108 insertions(+), 119 deletions(-)
drivers/gpu/drm/i915/intel_display.c +8 -8
@@ -9296,8 +9296,8 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,intel_get_shared_dpll_by_id (dev_priv, pll_id); pll = pipe_config->shared_dpll; -WARN_ON (!pll->get_hw_state (dev_priv, pll, - &pipe_config->dpll_hw_state)); +WARN_ON (!pll->funcs.get_hw_state (dev_priv, pll, + &pipe_config->dpll_hw_state)); tmp = pipe_config->dpll_hw_state.dpll; pipe_config->pixel_multiplier =
@@ -9843,8 +9843,8 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc, pll = pipe_config->shared_dpll;if (pll) { -WARN_ON (!pll->get_hw_state (dev_priv, pll, - &pipe_config->dpll_hw_state)); +WARN_ON (!pll->funcs.get_hw_state (dev_priv, pll, + &pipe_config->dpll_hw_state)); }/*
@@ -12922,7 +12922,7 @@ check_shared_dpll_state(struct drm_device *dev)DRM_DEBUG_KMS ("%s\n" , pll->name); - active = pll->get_hw_state (dev_priv, pll, &dpll_hw_state); + active = pll->funcs.get_hw_state (dev_priv, pll, &dpll_hw_state); I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask), "more active pll users than references: %i vs %i\n",
@@ -15672,8 +15672,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)for (i =0 ; i < dev_priv->num_shared_dpll; i++) {struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; - pll->on = pll->get_hw_state (dev_priv, pll, - &pll->config.hw_state); + pll->on = pll->funcs.get_hw_state (dev_priv, pll, + &pll->config.hw_state); pll->active =0 ; pll->config.crtc_mask =0 ;for_each_intel_crtc (dev, crtc) {
@@ -15810,7 +15810,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev)DRM_DEBUG_KMS ("%s enabled but not in use, disabling\n" , pll->name); - pll->disable (dev_priv, pll); + pll->funcs.disable (dev_priv, pll); pll->on = false; }
drivers/gpu/drm/i915/intel_dpll_mgr.c +86 -103
259 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +14 -8
@@ -28,6 +28,7 @@struct drm_i915_private ;struct intel_crtc ;struct intel_crtc_state ; +struct intel_shared_dpll ;enum intel_dpll_id {DPLL_ID_PRIVATE =-1 ,/* non-shared dpll in use */
@@ -78,14 +79,7 @@ struct intel_shared_dpll_config {struct intel_dpll_hw_state hw_state; }; -struct intel_shared_dpll { -struct intel_shared_dpll_config config; - -int active;/* count of number of active CRTCs (i.e. DPMS on) */ -bool on;/* is the PLL actually active? Disabled during modeset */ -const char *name; -/* should match the index in the dev_priv->shared_dplls array */ -enum intel_dpll_id id; +struct intel_shared_dpll_funcs {/* The mode_set hook is optional and should be used together with the * intel_prepare_shared_dpll function. */ void (*mode_set)(struct drm_i915_private *dev_priv,
@@ -99,6 +93,18 @@ struct intel_shared_dpll { struct intel_dpll_hw_state *hw_state); }; +struct intel_shared_dpll { +struct intel_shared_dpll_config config; + +int active;/* count of number of active CRTCs (i.e. DPMS on) */ +bool on;/* is the PLL actually active? Disabled during modeset */ +const char *name; +/* should match the index in the dev_priv->shared_dplls array */ +enum intel_dpll_id id; + +struct intel_shared_dpll_funcs funcs; +}; +#define SKL_DPLL0 0#define SKL_DPLL1 1#define SKL_DPLL2 2
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 8/13 drm/i915: Refactor platform specifics out of intel_get_shared_dpll()
In reply to Ander Conselvan de OliveiraThe function intel_get_shared_dpll() had a more or less generic implementation with some platform specific checks to handle smaller differences between platforms. However, the minimalist approach forces bigger differences between platforms to be implemented outside of the shared dpll code (see the *_ddi_pll_select() functions in intel_ddi.c, for instance).
This patch changes the implementation of intel_get_share_dpll() so that a completely platform specific version can be used, providing helpers to reduce code duplication. This should allow the code from the ddi pll select functions to be moved, and also make room for making more dplls managed by the shared dpll infrastructure.
v2: WARN_ON(!dpll_mgr) in intel_get_shared_dpll(). (Maarten)
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_dpll_mgr.c | 226 +++++++++++++++++++++------------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 2 + 3 files changed, 145 insertions(+), 84 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1809,6 +1809,7 @@ struct drm_i915_private {/* dpll and cdclk state is protected by connection_mutex */ int num_shared_dpll;struct intel_shared_dpll shared_dplls[I915_NUM_PLLS ]; +const struct intel_dpll_mgr *dpll_mgr;unsigned int active_crtcs;unsigned int min_pixclk[I915_MAX_PIPES ];
drivers/gpu/drm/i915/intel_dpll_mgr.c +142 -84
348 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +2 -0
@@ -30,6 +30,8 @@ struct intel_crtc;struct intel_crtc_state ;struct intel_shared_dpll ; +struct intel_dpll_mgr ; +enum intel_dpll_id {DPLL_ID_PRIVATE =-1 ,/* non-shared dpll in use */ /* real shared dpll ids must be >= 0 */
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 9/13 drm/i915: Move HSW/BDW pll selection logic to intel_dpll_mgr.c
In reply to Ander Conselvan de OliveiraMove the code for selecting and configuring HSW/BDW DDI PLLs into the shared dpll infrastructure. With this most of the PLL selection logic for those platforms is in one place. DisplayPort is handled separately, but that should be fixed on a follow up patch. It also allows a small clean up of the SPLL logic.
v2: Rebase.
--- drivers/gpu/drm/i915/intel_crt.c | 8 +- drivers/gpu/drm/i915/intel_ddi.c | 271 ++----------------------------- drivers/gpu/drm/i915/intel_display.c | 2 +- drivers/gpu/drm/i915/intel_dpll_mgr.c | 295 ++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dpll_mgr.h | 13 +- 5 files changed, 307 insertions(+), 282 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -7
@@ -265,15 +265,9 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder, pipe_config->pipe_bpp =24 ;/* FDI must always be 2.7 GHz */ -if (HAS_DDI (dev)) { - pipe_config->ddi_pll_sel =PORT_CLK_SEL_SPLL ; +if (HAS_DDI (dev)) pipe_config->port_clock =135000 *2 ; - pipe_config->dpll_hw_state.wrpll =0 ; - pipe_config->dpll_hw_state.spll = -SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz |SPLL_PLL_SSC ; - } -return true; }
drivers/gpu/drm/i915/intel_ddi.c +11 -260
304 lines not on this page · raw message
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -8930,7 +8930,7 @@ static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,else crtc_state->dpll_hw_state.fp1 = fp; - pll =intel_get_shared_dpll (crtc, crtc_state); + pll =intel_get_shared_dpll (crtc, crtc_state,NULL );if (pll ==NULL ) {DRM_DEBUG_DRIVER ("failed to find PLL for pipe %c\n" ,pipe_name (crtc->pipe));
drivers/gpu/drm/i915/intel_dpll_mgr.c +283 -12
341 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +11 -2
@@ -25,11 +25,19 @@#ifndef _INTEL_DPLL_MGR_H_#define _INTEL_DPLL_MGR_H_ +/*FIXME: Move this to a more appropriate place. */ +#define abs_diff (a, b) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + (void) (&__a == &__b); \ + __a > __b ? (__a - __b) : (__b - __a); }) +struct drm_i915_private ;struct intel_crtc ;struct intel_crtc_state ; -struct intel_shared_dpll ; +struct intel_encoder ; +struct intel_shared_dpll ;struct intel_dpll_mgr ; enum intel_dpll_id {
@@ -133,7 +141,8 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,#define assert_shared_dpll_enabled (d, p) assert_shared_dpll(d, p, true)#define assert_shared_dpll_disabled (d, p) assert_shared_dpll(d, p, false)struct intel_shared_dpll *intel_get_shared_dpll (struct intel_crtc *crtc, -struct intel_crtc_state *state); +struct intel_crtc_state *state, +struct intel_encoder *encoder);void intel_prepare_shared_dpll (struct intel_crtc *crtc);void intel_enable_shared_dpll (struct intel_crtc *crtc);void intel_disable_shared_dpll (struct intel_crtc *crtc);
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 10/13 drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c
In reply to Ander Conselvan de OliveiraMove the code for selecting plls for SKL/KLB into the shared dpll code, so that the platform specific details are hidden behind that interface.
--- drivers/gpu/drm/i915/intel_ddi.c | 301 +-------------------------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 307 +++++++++++++++++++++++++++++++++- 2 files changed, 306 insertions(+), 302 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +1 -300
@@ -1005,311 +1005,15 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc, } } -struct skl_wrpll_context { -uint64_t min_deviation;/* current minimal deviation */ -uint64_t central_freq;/* chosen central freq */ -uint64_t dco_freq;/* chosen dco freq */ -unsigned int p;/* chosen divider */ -}; - -static void skl_wrpll_context_init (struct skl_wrpll_context *ctx) -{ -memset (ctx,0 ,sizeof (*ctx)); - - ctx->min_deviation =U64_MAX ; -} - -/* DCO freq must be within +1%/-6% of the DCO central freq */ -#define SKL_DCO_MAX_PDEVIATION 100 -#define SKL_DCO_MAX_NDEVIATION 600 - -static void skl_wrpll_try_divider (struct skl_wrpll_context *ctx, -uint64_t central_freq, -uint64_t dco_freq, -unsigned int divider) -{ -uint64_t deviation; - - deviation =div64_u64 (10000 *abs_diff (dco_freq, central_freq), - central_freq); - -/* positive deviation */ -if (dco_freq >= central_freq) { -if (deviation <SKL_DCO_MAX_PDEVIATION && - deviation < ctx->min_deviation) { - ctx->min_deviation = deviation; - ctx->central_freq = central_freq; - ctx->dco_freq = dco_freq; - ctx->p = divider; - } -/* negative deviation */ - }else if (deviation <SKL_DCO_MAX_NDEVIATION && - deviation < ctx->min_deviation) { - ctx->min_deviation = deviation; - ctx->central_freq = central_freq; - ctx->dco_freq = dco_freq; - ctx->p = divider; - } -} - -static void skl_wrpll_get_multipliers (unsigned int p, -unsigned int *p0/* out */ , -unsigned int *p1/* out */ , -unsigned int *p2/* out */ ) -{ -/* even dividers */ -if (p %2 ==0 ) { -unsigned int half = p /2 ; - -if (half ==1 || half ==2 || half ==3 || half ==5 ) { - *p0 =2 ; - *p1 =1 ; - *p2 = half; - }else if (half %2 ==0 ) { - *p0 =2 ; - *p1 = half /2 ; - *p2 =2 ; - }else if (half %3 ==0 ) { - *p0 =3 ; - *p1 = half /3 ; - *p2 =2 ; - }else if (half %7 ==0 ) { - *p0 =7 ; - *p1 = half /7 ; - *p2 =2 ; - } - }else if (p ==3 || p ==9 ) {/* 3, 5, 7, 9, 15, 21, 35 */ - *p0 =3 ; - *p1 =1 ; - *p2 = p /3 ; - }else if (p ==5 || p ==7 ) { - *p0 = p; - *p1 =1 ; - *p2 =1 ; - }else if (p ==15 ) { - *p0 =3 ; - *p1 =1 ; - *p2 =5 ; - }else if (p ==21 ) { - *p0 =7 ; - *p1 =1 ; - *p2 =3 ; - }else if (p ==35 ) { - *p0 =7 ; - *p1 =1 ; - *p2 =5 ; - } -} - -struct skl_wrpll_params { -uint32_t dco_fraction; -uint32_t dco_integer; -uint32_t qdiv_ratio; -uint32_t qdiv_mode; -uint32_t kdiv; -uint32_t pdiv; -uint32_t central_freq; -}; - -static void skl_wrpll_params_populate (struct skl_wrpll_params *params, -uint64_t afe_clock, -uint64_t central_freq, -uint32_t p0,uint32_t p1,uint32_t p2) -{ -uint64_t dco_freq; - -switch (central_freq) { -case 9600000000ULL : - params->central_freq =0 ; -break ; -case 9000000000ULL : - params->central_freq =1 ; -break ; -case 8400000000ULL : - params->central_freq =3 ; - } - -switch (p0) { -case 1 : - params->pdiv =0 ; -break ; -case 2 : - params->pdiv =1 ; -break ; -case 3 : - params->pdiv =2 ; -break ; -case 7 : - params->pdiv =4 ; -break ; -default : -WARN (1 ,"Incorrect PDiv\n" ); - } - -switch (p2) { -case 5 : - params->kdiv =0 ; -break ; -case 2 : - params->kdiv =1 ; -break ; -case 3 : - params->kdiv =2 ; -break ; -case 1 : - params->kdiv =3 ; -break ; -default : -WARN (1 ,"Incorrect KDiv\n" ); - } - - params->qdiv_ratio = p1; - params->qdiv_mode = (params->qdiv_ratio ==1 ) ?0 :1 ; - - dco_freq = p0 * p1 * p2 * afe_clock; - -/* -* Intermediate values are in Hz. -* Divide by MHz to match bsepc -*/ - params->dco_integer =div_u64 (dco_freq,24 *MHz (1 )); - params->dco_fraction = -div_u64 ((div_u64 (dco_freq,24 ) - - params->dco_integer *MHz (1 )) *0x8000 ,MHz (1 )); -} - -static bool -skl_ddi_calculate_wrpll (int clock/* in Hz */ , -struct skl_wrpll_params *wrpll_params) -{ -uint64_t afe_clock = clock *5 ;/* AFE Clock is 5x Pixel clock */ -uint64_t dco_central_freq[3 ] = {8400000000ULL , -9000000000ULL , -9600000000ULL }; -static const int even_dividers[] = {4 ,6 ,8 ,10 ,12 ,14 ,16 ,18 ,20 , -24 ,28 ,30 ,32 ,36 ,40 ,42 ,44 , -48 ,52 ,54 ,56 ,60 ,64 ,66 ,68 , -70 ,72 ,76 ,78 ,80 ,84 ,88 ,90 , -92 ,96 ,98 }; -static const int odd_dividers[] = {3 ,5 ,7 ,9 ,15 ,21 ,35 }; -static const struct { -const int *list; -int n_dividers; - } dividers[] = { - { even_dividers,ARRAY_SIZE (even_dividers) }, - { odd_dividers,ARRAY_SIZE (odd_dividers) }, - }; -struct skl_wrpll_context ctx; -unsigned int dco, d, i; -unsigned int p0, p1, p2; - -skl_wrpll_context_init (&ctx); - -for (d =0 ; d <ARRAY_SIZE (dividers); d++) { -for (dco =0 ; dco <ARRAY_SIZE (dco_central_freq); dco++) { -for (i =0 ; i < dividers[d].n_dividers; i++) { -unsigned int p = dividers[d].list[i]; -uint64_t dco_freq = p * afe_clock; - -skl_wrpll_try_divider (&ctx, - dco_central_freq[dco], - dco_freq, - p); -/* -* Skip the remaining dividers if we're sure to -* have found the definitive divider, we can't -* improve a 0 deviation. -*/ -if (ctx.min_deviation ==0 ) - goto skip_remaining_dividers; - } - } - -skip_remaining_dividers: -/* -* If a solution is found with an even divider, prefer -* this one. -*/ -if (d ==0 && ctx.p) -break ; - } - -if (!ctx.p) { -DRM_DEBUG_DRIVER ("No valid divider found for %dHz\n" , clock); -return false; - } - -/* -* gcc incorrectly analyses that these can be used without being -* initialized. To be fair, it's hard to guess. -*/ - p0 = p1 = p2 =0 ; -skl_wrpll_get_multipliers (ctx.p, &p0, &p1, &p2); -skl_wrpll_params_populate (wrpll_params, afe_clock, ctx.central_freq, - p0, p1, p2); - -return true; -} -static bool skl_ddi_pll_select (struct intel_crtc *intel_crtc,struct intel_crtc_state *crtc_state,struct intel_encoder *intel_encoder) {struct intel_shared_dpll *pll; -uint32_t ctrl1, cfgcr1, cfgcr2; -int clock = crtc_state->port_clock; -/* -* See comment in intel_dpll_hw_state to understand why we always use 0 -* as the DPLL id in this function. -*/ - - ctrl1 =DPLL_CTRL1_OVERRIDE (0 ); - -if (intel_encoder->type ==INTEL_OUTPUT_HDMI ) { -struct skl_wrpll_params wrpll_params = {0 , }; - - ctrl1 |=DPLL_CTRL1_HDMI_MODE (0 ); - -if (!skl_ddi_calculate_wrpll (clock *1000 , &wrpll_params)) -return false; - - cfgcr1 =DPLL_CFGCR1_FREQ_ENABLE | -DPLL_CFGCR1_DCO_FRACTION (wrpll_params.dco_fraction) | - wrpll_params.dco_integer; - - cfgcr2 =DPLL_CFGCR2_QDIV_RATIO (wrpll_params.qdiv_ratio) | -DPLL_CFGCR2_QDIV_MODE (wrpll_params.qdiv_mode) | -DPLL_CFGCR2_KDIV (wrpll_params.kdiv) | -DPLL_CFGCR2_PDIV (wrpll_params.pdiv) | - wrpll_params.central_freq; - }else if (intel_encoder->type ==INTEL_OUTPUT_DISPLAYPORT || - intel_encoder->type ==INTEL_OUTPUT_DP_MST ) { -switch (crtc_state->port_clock /2 ) { -case 81000 : - ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_810 ,0 ); -break ; -case 135000 : - ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_1350 ,0 ); -break ; -case 270000 : - ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_2700 ,0 ); -break ; - } - - cfgcr1 = cfgcr2 =0 ; - }else if (intel_encoder->type ==INTEL_OUTPUT_EDP ) { +if (intel_encoder->type ==INTEL_OUTPUT_EDP )return true; - }else -return false; - -memset (&crtc_state->dpll_hw_state,0 , -sizeof (crtc_state->dpll_hw_state)); - - crtc_state->dpll_hw_state.ctrl1 = ctrl1; - crtc_state->dpll_hw_state.cfgcr1 = cfgcr1; - crtc_state->dpll_hw_state.cfgcr2 = cfgcr2; pll =intel_get_shared_dpll (intel_crtc, crtc_state, intel_encoder);if (pll ==NULL ) {
@@ -1318,9 +1022,6 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,return false; } -/* shared DPLL id 0 is DPLL 1 */ - crtc_state->ddi_pll_sel = pll->id +1 ; -return true; }
drivers/gpu/drm/i915/intel_dpll_mgr.c +305 -2
321 lines not on this page · raw message
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 11/13 drm/i915: Move BXT pll configuration logic to intel_dpll_mgr.c
In reply to Ander Conselvan de OliveiraMove the code for configurating BXT plls into the shared dpll code, so that the platform specific details are hidden behind that interface.
--- drivers/gpu/drm/i915/intel_ddi.c | 141 +--------------------------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 139 +++++++++++++++++++++++++++++++-- 2 files changed, 134 insertions(+), 146 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +1 -140
@@ -1025,151 +1025,12 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,return true; } -/* bxt clock parameters */ -struct bxt_clk_div { -int clock; -uint32_t p1; -uint32_t p2; -uint32_t m2_int; -uint32_t m2_frac; -bool m2_frac_en; -uint32_t n; -}; - -/* pre-calculated values for DP linkrates */ -static const struct bxt_clk_div bxt_dp_clk_val[] = { - {162000 ,4 ,2 ,32 ,1677722 ,1 ,1 }, - {270000 ,4 ,1 ,27 ,0 ,0 ,1 }, - {540000 ,2 ,1 ,27 ,0 ,0 ,1 }, - {216000 ,3 ,2 ,32 ,1677722 ,1 ,1 }, - {243000 ,4 ,1 ,24 ,1258291 ,1 ,1 }, - {324000 ,4 ,1 ,32 ,1677722 ,1 ,1 }, - {432000 ,3 ,1 ,32 ,1677722 ,1 ,1 } -}; -static bool bxt_ddi_pll_select (struct intel_crtc *intel_crtc,struct intel_crtc_state *crtc_state,struct intel_encoder *intel_encoder) { -struct intel_shared_dpll *pll; -struct bxt_clk_div clk_div = {0 }; -int vco =0 ; -uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; -uint32_t lanestagger; -int clock = crtc_state->port_clock; - -if (intel_encoder->type ==INTEL_OUTPUT_HDMI ) { -intel_clock_t best_clock; - -/* Calculate HDMI div */ -/* -* FIXME: tie the following calculation into -* i9xx_crtc_compute_clock -*/ -if (!bxt_find_best_dpll (crtc_state, clock, &best_clock)) { -DRM_DEBUG_DRIVER ("no PLL dividers found for clock %d pipe %c\n" , - clock,pipe_name (intel_crtc->pipe)); -return false; - } - - clk_div.p1 = best_clock.p1; - clk_div.p2 = best_clock.p2; -WARN_ON (best_clock.m1 !=2 ); - clk_div.n = best_clock.n; - clk_div.m2_int = best_clock.m2 >>22 ; - clk_div.m2_frac = best_clock.m2 & ((1 <<22 ) -1 ); - clk_div.m2_frac_en = clk_div.m2_frac !=0 ; - - vco = best_clock.vco; - }else if (intel_encoder->type ==INTEL_OUTPUT_DISPLAYPORT || - intel_encoder->type ==INTEL_OUTPUT_EDP ) { -int i; - - clk_div = bxt_dp_clk_val[0 ]; -for (i =0 ; i <ARRAY_SIZE (bxt_dp_clk_val); ++i) { -if (bxt_dp_clk_val[i].clock == clock) { - clk_div = bxt_dp_clk_val[i]; -break ; - } - } - vco = clock *10 /2 * clk_div.p1 * clk_div.p2; - } - -if (vco >=6200000 && vco <=6700000 ) { - prop_coef =4 ; - int_coef =9 ; - gain_ctl =3 ; - targ_cnt =8 ; - }else if ((vco >5400000 && vco <6200000 ) || - (vco >=4800000 && vco <5400000 )) { - prop_coef =5 ; - int_coef =11 ; - gain_ctl =3 ; - targ_cnt =9 ; - }else if (vco ==5400000 ) { - prop_coef =3 ; - int_coef =8 ; - gain_ctl =1 ; - targ_cnt =9 ; - }else { -DRM_ERROR ("Invalid VCO\n" ); -return false; - } - -memset (&crtc_state->dpll_hw_state,0 , -sizeof (crtc_state->dpll_hw_state)); - -if (clock >270000 ) - lanestagger =0x18 ; -else if (clock >135000 ) - lanestagger =0x0d ; -else if (clock >67000 ) - lanestagger =0x07 ; -else if (clock >33000 ) - lanestagger =0x04 ; -else - lanestagger =0x02 ; - - crtc_state->dpll_hw_state.ebb0 = -PORT_PLL_P1 (clk_div.p1) |PORT_PLL_P2 (clk_div.p2); - crtc_state->dpll_hw_state.pll0 = clk_div.m2_int; - crtc_state->dpll_hw_state.pll1 =PORT_PLL_N (clk_div.n); - crtc_state->dpll_hw_state.pll2 = clk_div.m2_frac; - -if (clk_div.m2_frac_en) - crtc_state->dpll_hw_state.pll3 = -PORT_PLL_M2_FRAC_ENABLE ; - - crtc_state->dpll_hw_state.pll6 = - prop_coef |PORT_PLL_INT_COEFF (int_coef); - crtc_state->dpll_hw_state.pll6 |= -PORT_PLL_GAIN_CTL (gain_ctl); - - crtc_state->dpll_hw_state.pll8 = targ_cnt; - - crtc_state->dpll_hw_state.pll9 =5 <<PORT_PLL_LOCK_THRESHOLD_SHIFT ; - - crtc_state->dpll_hw_state.pll10 = -PORT_PLL_DCO_AMP (PORT_PLL_DCO_AMP_DEFAULT ) - |PORT_PLL_DCO_AMP_OVR_EN_H ; - - crtc_state->dpll_hw_state.ebb4 =PORT_PLL_10BIT_CLK_ENABLE ; - - crtc_state->dpll_hw_state.pcsdw12 = -LANESTAGGER_STRAP_OVRD | lanestagger; - - pll =intel_get_shared_dpll (intel_crtc, crtc_state, intel_encoder); -if (pll ==NULL ) { -DRM_DEBUG_DRIVER ("failed to find PLL for pipe %c\n" , -pipe_name (intel_crtc->pipe)); -return false; - } - -/* shared DPLL id 0 is DPLL A */ - crtc_state->ddi_pll_sel = pll->id; - -return true; +return !!intel_get_shared_dpll (intel_crtc, crtc_state, intel_encoder); }/*
drivers/gpu/drm/i915/intel_dpll_mgr.c +133 -6
162 lines not on this page · raw message
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 12/13 drm/i915: Manage HSW/BDW LCPLLs with the shared dpll interface
In reply to Ander Conselvan de OliveiraManage the LCPLLs used with DisplayPort, so that all the HSW/BDW DPLLs are managed by the shared dpll code.
v2: Introduce INTEL_DPLL_ALWAYS_ON flag to please state checker. (Ander)
v3: Initialize pll->flags in intel_shared_dpll_init(). (Ander)
--- drivers/gpu/drm/i915/intel_ddi.c | 18 +++---- drivers/gpu/drm/i915/intel_display.c | 25 ++++++---- drivers/gpu/drm/i915/intel_dp.c | 23 +-------- drivers/gpu/drm/i915/intel_dp_mst.c | 4 -- drivers/gpu/drm/i915/intel_dpll_mgr.c | 90 ++++++++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 12 ++++- drivers/gpu/drm/i915/intel_drv.h | 1 - 7 files changed, 108 insertions(+), 65 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +7 -11
@@ -992,17 +992,13 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc, {struct intel_shared_dpll *pll; -if (intel_encoder->type ==INTEL_OUTPUT_HDMI || - intel_encoder->type ==INTEL_OUTPUT_ANALOG ) { - pll =intel_get_shared_dpll (intel_crtc, crtc_state, - intel_encoder); -if (!pll) -DRM_DEBUG_DRIVER ("failed to find PLL for pipe %c\n" , -pipe_name (intel_crtc->pipe)); -return pll; - }else { -return true; - } + pll =intel_get_shared_dpll (intel_crtc, crtc_state, + intel_encoder); +if (!pll) +DRM_DEBUG_DRIVER ("failed to find PLL for pipe %c\n" , +pipe_name (intel_crtc->pipe)); + +return pll; } static bool
drivers/gpu/drm/i915/intel_display.c +17 -8
@@ -9808,13 +9808,19 @@ static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,case PORT_CLK_SEL_SPLL : id =DPLL_ID_SPLL ;break ; +case PORT_CLK_SEL_LCPLL_810 : + id =DPLL_ID_LCPLL_810 ; +break ; +case PORT_CLK_SEL_LCPLL_1350 : + id =DPLL_ID_LCPLL_1350 ; +break ; +case PORT_CLK_SEL_LCPLL_2700 : + id =DPLL_ID_LCPLL_2700 ; +break ;default :MISSING_CASE (pipe_config->ddi_pll_sel);/* fall through */ case PORT_CLK_SEL_NONE : -case PORT_CLK_SEL_LCPLL_810 : -case PORT_CLK_SEL_LCPLL_1350 : -case PORT_CLK_SEL_LCPLL_2700 :return ; }
@@ -12929,11 +12935,14 @@ check_shared_dpll_state(struct drm_device *dev) pll->active, hweight32(pll->config.crtc_mask));I915_STATE_WARN (pll->active && !pll->on,"pll in active use but not on in sw tracking\n" ); -I915_STATE_WARN (pll->on && !pll->active, -"pll in on but not on in use in sw tracking\n" ); -I915_STATE_WARN (pll->on != active, -"pll on state mismatch (expected %i, found %i)\n" , - pll->on, active); + +if (!(pll->flags &INTEL_DPLL_ALWAYS_ON )) { +I915_STATE_WARN (pll->on && !pll->active, +"pll in on but not on in use in sw tracking\n" ); +I915_STATE_WARN (pll->on != active, +"pll on state mismatch (expected %i, found %i)\n" , + pll->on, active); + }for_each_intel_crtc (dev, crtc) {if (crtc->base.state->enable && crtc->config->shared_dpll == pll)
drivers/gpu/drm/i915/intel_dp.c +1 -22
@@ -1275,25 +1275,6 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config) pipe_config->dpll_hw_state.ctrl1 = ctrl1; } -void -hsw_dp_set_ddi_pll_sel (struct intel_crtc_state *pipe_config) -{ -memset (&pipe_config->dpll_hw_state,0 , -sizeof (pipe_config->dpll_hw_state)); - -switch (pipe_config->port_clock /2 ) { -case 81000 : - pipe_config->ddi_pll_sel =PORT_CLK_SEL_LCPLL_810 ; -break ; -case 135000 : - pipe_config->ddi_pll_sel =PORT_CLK_SEL_LCPLL_1350 ; -break ; -case 270000 : - pipe_config->ddi_pll_sel =PORT_CLK_SEL_LCPLL_2700 ; -break ; - } -} -static int intel_dp_sink_rates (struct intel_dp *intel_dp,const int **sink_rates) {
@@ -1653,10 +1634,8 @@ found:if ((IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) &&is_edp (intel_dp))skl_edp_set_pll_config (pipe_config); -else if (IS_BROXTON (dev)) +else if (IS_BROXTON (dev) ||IS_HASWELL (dev) ||IS_BROADWELL (dev))/* handled in ddi */ ; -else if (IS_HASWELL (dev) ||IS_BROADWELL (dev)) -hsw_dp_set_ddi_pll_sel (pipe_config);else intel_dp_set_clock (encoder, pipe_config);
drivers/gpu/drm/i915/intel_dp_mst.c +0 -4
@@ -33,7 +33,6 @@static bool intel_dp_mst_compute_config (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config) { -struct drm_device *dev = encoder->base.dev;struct intel_dp_mst_encoder *intel_mst =enc_to_mst (&encoder->base);struct intel_digital_port *intel_dig_port = intel_mst->primary;struct intel_dp *intel_dp = &intel_dig_port->dp;
@@ -92,9 +91,6 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder, pipe_config->dp_m_n.tu = slots; -if (IS_HASWELL (dev) ||IS_BROADWELL (dev)) -hsw_dp_set_ddi_pll_sel (pipe_config); -return true; }
drivers/gpu/drm/i915/intel_dpll_mgr.c +72 -18
162 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +11 -1
@@ -49,13 +49,21 @@ enum intel_dpll_id {DPLL_ID_WRPLL1 =0 ,DPLL_ID_WRPLL2 =1 ,DPLL_ID_SPLL =2 , +DPLL_ID_LCPLL_810 =3 , +DPLL_ID_LCPLL_1350 =4 , +DPLL_ID_LCPLL_2700 =5 ,/* skl */ DPLL_ID_SKL_DPLL1 =0 ,DPLL_ID_SKL_DPLL2 =1 , DPLL_ID_SKL_DPLL3 = 2, }; -#define I915_NUM_PLLS 3 +#define I915_NUM_PLLS 6 + +/** Inform the state checker that the DPLL is kept enabled even if not +* in use by any crtc. +*/ +#define INTEL_DPLL_ALWAYS_ON (1 << 0) struct intel_dpll_hw_state {/* i9xx, pch plls */
@@ -113,6 +121,8 @@ struct intel_shared_dpll {enum intel_dpll_id id;struct intel_shared_dpll_funcs funcs; + +uint32_t flags; };#define SKL_DPLL0 0
drivers/gpu/drm/i915/intel_drv.h +0 -1
@@ -1279,7 +1279,6 @@ void intel_edp_drrs_invalidate(struct drm_device *dev,void intel_edp_drrs_flush (struct drm_device *dev,unsigned frontbuffer_bits);bool intel_digital_port_connected (struct drm_i915_private *dev_priv,struct intel_digital_port *port); -void hsw_dp_set_ddi_pll_sel (struct intel_crtc_state *pipe_config); void intel_dp_program_link_training_pattern(struct intel_dp *intel_dp,
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 13/13 drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
In reply to Ander Conselvan de OliveiraInclude DPLL0 in the managed dplls for SKL/KBL. While it has to be kept enabled because of it driving CDCLK, it is better to special case that inside the DPLL code than in the higher level.
v2: Use INTEL_DPLL_ALWAYS_ON flag. (Ander)
v3: Remove extremely paranoid WARN_ONs. (Maarten)
Handle DPLL0 in skylake_get_ddi_pll() properly. (Ander)
--- drivers/gpu/drm/i915/intel_ddi.c | 21 ------ drivers/gpu/drm/i915/intel_display.c | 12 +--- drivers/gpu/drm/i915/intel_dp.c | 52 +------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 124 ++++++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 7 +- 5 files changed, 105 insertions(+), 111 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +0 -21
@@ -1008,9 +1008,6 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc, {struct intel_shared_dpll *pll; -if (intel_encoder->type ==INTEL_OUTPUT_EDP ) -return true; - pll =intel_get_shared_dpll (intel_crtc, crtc_state, intel_encoder);if (pll ==NULL ) { DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
@@ -1570,24 +1567,6 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,uint32_t dpll = pipe_config->ddi_pll_sel;uint32_t val; -/* -* DPLL0 is used for eDP and is the only "private" DPLL (as -* opposed to shared) on SKL -*/ -if (encoder->type ==INTEL_OUTPUT_EDP ) { -WARN_ON (dpll !=SKL_DPLL0 ); - - val =I915_READ (DPLL_CTRL1 ); - - val &= ~(DPLL_CTRL1_HDMI_MODE (dpll) | -DPLL_CTRL1_SSC (dpll) | -DPLL_CTRL1_LINK_RATE_MASK (dpll)); - val |= pipe_config->dpll_hw_state.ctrl1 << (dpll *6 ); - -I915_WRITE (DPLL_CTRL1 , val); -POSTING_READ (DPLL_CTRL1 ); - } -/* DDI -> PLL mapping */ val =I915_READ (DPLL_CTRL2 );
drivers/gpu/drm/i915/intel_display.c +3 -9
@@ -9758,21 +9758,15 @@ static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv, struct intel_crtc_state *pipe_config) {enum intel_dpll_id id; -u32 temp, dpll_ctl1; +u32 temp; temp =I915_READ (DPLL_CTRL2 ) &DPLL_CTRL2_DDI_CLK_SEL_MASK (port); pipe_config->ddi_pll_sel = temp >> (port *3 +1 );switch (pipe_config->ddi_pll_sel) {case SKL_DPLL0 : -/* -* On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part -* of the shared DPLL framework and thus needs to be read out -* separately -*/ - dpll_ctl1 =I915_READ (DPLL_CTRL1 ); - pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 &0x3f ; -return ; + id =DPLL_ID_SKL_DPLL0 ; +break ;case SKL_DPLL1 : id =DPLL_ID_SKL_DPLL1 ;break ;
drivers/gpu/drm/i915/intel_dp.c +1 -51
64 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.c +97 -27
213 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +4 -3
@@ -54,9 +54,10 @@ enum intel_dpll_id {DPLL_ID_LCPLL_2700 =5 ,/* skl */ -DPLL_ID_SKL_DPLL1 =0 , -DPLL_ID_SKL_DPLL2 =1 , - DPLL_ID_SKL_DPLL3 = 2, +DPLL_ID_SKL_DPLL0 =0 , +DPLL_ID_SKL_DPLL1 =1 , +DPLL_ID_SKL_DPLL2 =2 , + DPLL_ID_SKL_DPLL3 = 3, };#define I915_NUM_PLLS 6
Signature · 6 lines
2.4.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 13/13] drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
Op 08-03-16 om 16:46 schreef Ander Conselvan de Oliveira:
Quoted 9 lines
Include DPLL0 in the managed dplls for SKL/KBL. While it has to be kept enabled because of it driving CDCLK, it is better to special case that inside the DPLL code than in the higher level.
v2: Use
INTEL_DPLL_ALWAYS_ONflag. (Ander)v3: Remove extremely paranoid
WARN_ONs. (Maarten)
Handle DPLL0 inskylake_get_ddi_pll()properly. (Ander)
Quoted 8 lines
Signed-off-by Ander Conselvan de Oliveira <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 21 ------ drivers/gpu/drm/i915/intel_display.c | 12 +--- drivers/gpu/drm/i915/intel_dp.c | 52 +------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 124 ++++++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 7 +- 5 files changed, 105 insertions(+), 111 deletions(-)
Excellent, glad you managed to test it. :)
Quoted 11 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +6
-0@@ -1176,6 +1221,19 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,case 270000 : ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_2700 ,0 );break ; +/* eDP 1.4 rates */ +case 162000 : + ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_1620 ,0 ); +break ; +/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which +results in CDCLK change. Need to handle the change of CDCLK by
drivers/gpu/drm/i915/intel_dpll_mgr.c skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, · line 1239
Quoted 10 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +7
-0+disabling pipes and re-enabling them */ +case 108000 : + ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_1080 ,0 ); +break ; +case 216000 : + ctrl1 |=DPLL_CTRL1_LINK_RATE (DPLL_CTRL1_LINK_RATE_2160 ,0 ); +break ; } cfgcr1 = cfgcr2 =0 ;
Seems there's already a patch to address this on the mailing list, so for 12 and 13:
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 13/13] drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
Quoted 47 lines · Maarten Lankhorst
Op 08-03-16 om 16:46 schreef Ander Conselvan de Oliveira:
Quoted 11 lines
Include DPLL0 in the managed dplls for SKL/KBL. While it has to be kept enabled because of it driving CDCLK, it is better to special case that inside the DPLL code than in the higher level.
v2: Use
INTEL_DPLL_ALWAYS_ONflag. (Ander)v3: Remove extremely paranoid
WARN_ONs. (Maarten)
Handle DPLL0 inskylake_get_ddi_pll()properly. (Ander)Signed-off-by: Ander Conselvan de Oliveira <
[email protected]>Quoted 8 lines
--- drivers/gpu/drm/i915/intel_ddi.c | 21 ------ drivers/gpu/drm/i915/intel_display.c | 12 +--- drivers/gpu/drm/i915/intel_dp.c | 52 +------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 124 ++++++++++++++++++++++++++----- --- drivers/gpu/drm/i915/intel_dpll_mgr.h | 7 +- 5 files changed, 105 insertions(+), 111 deletions(-)Excellent, glad you managed to test it. :)
Quoted 26 lines
(quoted diff) +5
-0@@ -1176,6 +1221,19 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, case 270000: ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0); break; + /* eDP 1.4 rates */ + case 162000: + ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, 0); + break; + /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is8640 which
(quoted diff) +1
-0+ results in CDCLK change. Need to handle the change of CDCLKby
drivers/gpu/drm/i915/intel_dpll_mgr.c +3
-0+disabling pipes and re-enabling them */ +case 108000 : + ctrl1 |=
DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 0);drivers/gpu/drm/i915/intel_dpll_mgr.c +3
-0+break ; +case 216000 : + ctrl1 |=
DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, 0);(quoted diff) +1
-0+ break; }
Quoted 6 lines
Quoted 2 lines
cfgcr1 = cfgcr2 = 0;
Seems there's already a patch to address this on the mailing list, so for 12 and 13:
Reviewed-by Maarten Lankhorst <[email protected]>
Whole series merged. Thanks for reviewing.
Ander
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for Shared pll improvements (rev4)
In reply to Ander Conselvan de Oliveira== Series Details ==
== Series Details ==
Series: Shared pll improvements (rev4)
URL : https://patchwork.freedesktop.org/series/3850/
State : warning
== Summary ==
Series 3850v4 Shared pll improvements
http://patchwork.freedesktop.org/api/1.0/series/3850/revisions/4/mbox/
Test kms_flip:
Subgroup basic-flip-vs-dpms:
dmesg-warn -> PASS (bdw-ultra)
Test kms_frontbuffer_tracking:
Subgroup basic:
pass -> DMESG-WARN (snb-x220t)
Test kms_pipe_crc_basic:
Subgroup nonblocking-crc-pipe-b:
dmesg-warn -> PASS (hsw-gt2)
Test pm_rpm:
Subgroup basic-pci-d3-state:
dmesg-fail -> FAIL (snb-x220t)
pass -> DMESG-WARN (snb-dellxps)
Subgroup basic-rte:
dmesg-warn -> PASS (snb-x220t)
dmesg-warn -> PASS (snb-dellxps)
dmesg-warn -> PASS (bsw-nuc-2)bdw-nuci7 total:186 pass:174 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:186 pass:167 dwarn:0 dfail:0 fail:0 skip:19 bsw-nuc-2 total:186 pass:151 dwarn:0 dfail:0 fail:0 skip:35 byt-nuc total:186 pass:154 dwarn:0 dfail:0 fail:0 skip:32 hsw-brixbox total:186 pass:166 dwarn:0 dfail:0 fail:0 skip:20 hsw-gt2 total:186 pass:170 dwarn:1 dfail:0 fail:0 skip:15 ilk-hp8440p total:186 pass:127 dwarn:0 dfail:0 fail:0 skip:59 ivb-t430s total:186 pass:164 dwarn:0 dfail:0 fail:0 skip:22 skl-i5k-2 total:186 pass:165 dwarn:0 dfail:0 fail:0 skip:21 skl-i7k-2 total:186 pass:165 dwarn:0 dfail:0 fail:0 skip:21 snb-dellxps total:186 pass:155 dwarn:1 dfail:0 fail:0 skip:30 snb-x220t total:186 pass:155 dwarn:1 dfail:0 fail:1 skip:29
Results at /archive/results/CI_IGT_test/Patchwork_1542/
b519bbd9633eca6bc8e8e80588b48bcee447c330 drm-intel-nightly: 2016y-03m-08d-13h-00m-35s UTC integration manifest f8848e64f47e4200ca993ab5bb868bd6c68767a3 drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code 4ebc277121e7ac78ec5b276285036adc7fd0378c drm/i915: Manage HSW/BDW LCPLLs with the shared dpll interface 3a4e1a242b5bcfd9f13dd396148496cd5023e148 drm/i915: Move BXT pll configuration logic to intel_dpll_mgr.c 7c5af214173d1b70d5700182ac13c1426b420101 drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c bbd624df74bdedbbdd6aeed20dff43e8cc2c1bf2 drm/i915: Move HSW/BDW pll selection logic to intel_dpll_mgr.c 7dfc6d5ac9dbca040722b3f8160d701303224e23 drm/i915: Refactor platform specifics out of intel_get_shared_dpll() 0e6c3ed940919ec78fcd17fe817854463239c949 drm/i915: Use a table to initilize shared dplls 2a434bf66a3a5db28cee6fdcb302007554cbac5e drm/i915: Move shared dpll function prototypes to intel_dpll_mgr.h 4654f45012aa9cce7a906a11f3ef6833826f0c2a drm/i915: Move shared dpll struct definitions to separate header file 29d479929a350c2623dae07f400623f33ece8f1a drm/i915: Store a direct pointer to shared dpll in intel_crtc_state 12b8330b15a5feb3e6a3cf41216a2f2f803ee755 drm/i915: Split intel_get_shared_dpll() into smaller functions dfa9c8044c69fb361e7482c5c58b997618eb163d drm/i915: Move ddi shared dpll code to intel_dpll_mgr.c 8584a2d3faa95cfe6094391d7a20d1a1f3a790c7 drm/i915: Move shared dpll code to a new file
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: warning for Shared pll improvements (rev4)
Quoted 11 lines · Patchwork
== Series Details ==
Series: Shared pll improvements (rev4)
URL : https://patchwork.freedesktop.org/series/3850/
State : warning== Summary ==
Series 3850v4 Shared pll improvements
http://patchwork.freedesktop.org/api/1.0/series/3850/revisions/4/mbox/
Quoted 6 lines
Test
kms_flip:Subgroup basic-flip-vs-dpms: dmesg-warn -> PASS (bdw-ultra) Test kms_frontbuffer_tracking: Subgroup basic: pass -> DMESG-WARN (snb-x220t)
https://bugs.freedesktop.org/show_bug.cgi?id=94349
Quoted 6 lines
Test
kms_pipe_crc_basic:Subgroup nonblocking-crc-pipe-b: dmesg-warn -> PASS (hsw-gt2) Test pm_rpm: Subgroup basic-pci-d3-state: dmesg-fail -> FAIL (snb-x220t)
https://bugs.freedesktop.org/show_bug.cgi?id=93123
Quoted 1 line
pass -> DMESG-WARN (snb-dellxps)
https://bugs.freedesktop.org/show_bug.cgi?id=94349
Quoted 40 lines
Subgroup basic-rte: dmesg-warn -> PASS (snb-x220t) dmesg-warn -> PASS (snb-dellxps) dmesg-warn -> PASS (bsw-nuc-2)bdw-nuci7 total:186 pass:174 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:186 pass:167 dwarn:0 dfail:0 fail:0 skip:19 bsw-nuc-2 total:186 pass:151 dwarn:0 dfail:0 fail:0 skip:35 byt-nuc total:186 pass:154 dwarn:0 dfail:0 fail:0 skip:32 hsw-brixbox total:186 pass:166 dwarn:0 dfail:0 fail:0 skip:20 hsw-gt2 total:186 pass:170 dwarn:1 dfail:0 fail:0 skip:15 ilk-hp8440p total:186 pass:127 dwarn:0 dfail:0 fail:0 skip:59 ivb-t430s total:186 pass:164 dwarn:0 dfail:0 fail:0 skip:22 skl-i5k-2 total:186 pass:165 dwarn:0 dfail:0 fail:0 skip:21 skl-i7k-2 total:186 pass:165 dwarn:0 dfail:0 fail:0 skip:21 snb-dellxps total:186 pass:155 dwarn:1 dfail:0 fail:0 skip:30 snb-x220t total:186 pass:155 dwarn:1 dfail:0 fail:1 skip:29Results at /archive/results/CI_IGT_test/Patchwork_1542/
b519bbd9633eca6bc8e8e80588b48bcee447c330drm-intel-nightly: 2016y-03m-08d-13h -00m-35s UTC integration manifestf8848e64f47e4200ca993ab5bb868bd6c68767a3drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code4ebc277121e7ac78ec5b276285036adc7fd0378cdrm/i915: Manage HSW/BDW LCPLLs with the shared dpll interface3a4e1a242b5bcfd9f13dd396148496cd5023e148drm/i915: Move BXT pll configuration logic tointel_dpll_mgr.c7c5af214173d1b70d5700182ac13c1426b420101drm/i915: Move SKL/KLB pll selection logic tointel_dpll_mgr.cbbd624df74bdedbbdd6aeed20dff43e8cc2c1bf2drm/i915: Move HSW/BDW pll selection logic tointel_dpll_mgr.c7dfc6d5ac9dbca040722b3f8160d701303224e23drm/i915: Refactor platform specifics out ofintel_get_shared_dpll()0e6c3ed940919ec78fcd17fe817854463239c949drm/i915: Use a table to initilize shared dplls2a434bf66a3a5db28cee6fdcb302007554cbac5edrm/i915: Move shared dpll function prototypes tointel_dpll_mgr.h4654f45012aa9cce7a906a11f3ef6833826f0c2adrm/i915: Move shared dpll struct definitions to separate header file
Quoted 9 lines
29d479929a350c2623dae07f400623f33ece8f1adrm/i915: Store a direct pointer to shared dpll inintel_crtc_state12b8330b15a5feb3e6a3cf41216a2f2f803ee755drm/i915: Splitintel_get_shared_dpll()into smaller functionsdfa9c8044c69fb361e7482c5c58b997618eb163ddrm/i915: Move ddi shared dpll code tointel_dpll_mgr.c8584a2d3faa95cfe6094391d7a20d1a1f3a790c7drm/i915: Move shared dpll code to a new file
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx