xtensa: add core variants used in sample configurations

new file mode 100644
index 0000000..309caa1
@@ -0,0 +1,384 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of version 2.1 of the GNU
+ * Lesser General Public License as published by the Free Software Foundation.
+ *
+ * Copyright (c) 1999-2009 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		0	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MP_INTERRUPTS	1	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		1	/* core RunStall control port */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			2	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_DFP			0	/* double precision FP pkg */
+#define XCHAL_HAVE_DFP_accel		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2		1	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		8	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		800000	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"test_mmuhifi_c3"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION		"test_mmuhifi_c3"
+#define XCHAL_BUILD_UNIQUE_ID		0x00005A6A	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3CBFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x10405A6A	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX3.0.0"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2300	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		0	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		230000	/* major*100+minor */
+#define XCHAL_HW_REL_LX3		1
+#define XCHAL_HW_REL_LX3_0		1
+#define XCHAL_HW_REL_LX3_0_0		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2300	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	0	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		230000	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2300	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	0	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		230000	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	1	/* MP coherence feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		8
+#define XCHAL_DCACHE_SETWIDTH		8
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		2
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	0
+#define XCHAL_DCACHE_LINE_LOCKABLE	0
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	8
+#define XCHAL_DCACHE_ACCESS_SIZE	8
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			0	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		2	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		12	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	4	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		9	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		2	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x00000FFF
+#define XCHAL_INTLEVEL2_MASK		0x00000000
+#define XCHAL_INTLEVEL3_MASK		0x00000000
+#define XCHAL_INTLEVEL4_MASK		0x00000000
+#define XCHAL_INTLEVEL5_MASK		0x00000000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00000000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x00000FFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		1
+#define XCHAL_INT9_LEVEL		1
+#define XCHAL_INT10_LEVEL		1
+#define XCHAL_INT11_LEVEL		1
+#define XCHAL_DEBUGLEVEL		2	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFFFF000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000080
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000004
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x00000E3B
+#define XCHAL_INTTYPE_MASK_TIMER	0x00000140
+#define XCHAL_INTTYPE_MASK_NMI		0x00000000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		8	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+/*  (There are many interrupts each at level(s) 1.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		9	/* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM		10	/* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM		11	/* (intlevel 1) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0xD0000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0xD8000500
+#define XCHAL_RESET_VECTOR1_PADDR	0x00000500
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0xD0000340
+#define XCHAL_USER_VECTOR_PADDR		0x00000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD00003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000280
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000280
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL2_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL2_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL2_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		0	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		0	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+

183 lines not on this page · raw message

141 lines not on this page · raw message

new file mode 100644
index 0000000..1ed2cb8
@@ -0,0 +1,532 @@
+/* 
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ *				processor CORE configuration
+ *
+ *  See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+   Copyright (c) 1999-2014 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE		0	/* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	0	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MX			0	/* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS	0	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		0	/* core RunStall control port */
+#define XCHAL_HAVE_PSO			0	/* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM		0	/* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION	0	/* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* single prec floating point */
+#define XCHAL_HAVE_FP_DIV		0	/* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP		0	/* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT		0	/* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT		0	/* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP			0	/* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV		0	/* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP		0	/* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT		0	/* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT		0	/* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_accel		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3		1	/* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP		0	/* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI		0	
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+#define XCHAL_HAVE_BBE16		0	/* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT		0	/* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV		0	/* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD	0	/* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP		0	/* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3			0	/* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE	0	/* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16		0	/* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI	0	/* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16		0	/* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16		0	/* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3		0	/* basic 3-way FLIX option */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS	1	/* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		8	/* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY		1	/* d-side pipeline delay
+						   (1 = 5-stage, 2 = 7-stage) */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		1000004	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"test_kc705_hifi"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x0004983D	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3FFFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x1904983D	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX5.0.4"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2500	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		4	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		250004	/* major*100+minor */
+#define XCHAL_HW_REL_LX5		1
+#define XCHAL_HW_REL_LX5_0		1
+#define XCHAL_HW_REL_LX5_0_4		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2500	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	4	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		250004	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2500	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	4	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		250004	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	0	/* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH		1	/* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1		0	/* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES	1	/* dcache pref. castout bufsz */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	8
+#define XCHAL_DCACHE_ACCESS_SIZE	8
+
+#define XCHAL_DCACHE_BANKS		1	/* number of banks */
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE	1	/* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		16	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F00BF
+#define XCHAL_INTLEVEL2_MASK		0x00000140
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00009000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F00BF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F01FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F0FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		2
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		4
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_PROFILING
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F0000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING	0x00008000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+#define XCHAL_PROFILING_INTERRUPT	15	/* profiling interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 2, 3, 4.)  */
+
+
+/*
+ *  External interrupt mapping.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		21	/* (intlevel 3) */
+/*  EXTERNAL BInterrupt pin numbers mapped to each core interrupt number:  */
+#define XCHAL_INT0_EXTNUM		0	/* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM		1	/* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM		2	/* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM		3	/* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM		4	/* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM		5	/* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM		6	/* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM		7	/* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM		8	/* (intlevel 4) */
+#define XCHAL_INT14_EXTNUM		9	/* (intlevel 7) */
+#define XCHAL_INT16_EXTNUM		10	/* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM		11	/* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM		12	/* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM		13	/* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM		14	/* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM		15	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_HALT			0	/* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER		0	/* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0x00002000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00002000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0x00001000
+#define XCHAL_RESET_VECTOR1_PADDR	0x00001000
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0x00002340
+#define XCHAL_USER_VECTOR_PADDR		0x00002340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0x00002300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00002300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x000023C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000023C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x00002000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00002000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x00002180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00002180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x000021C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000021C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x00002200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00002200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0x00002240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00002240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0x00002280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00002280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0x000022C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000022C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG MODULE
+  ----------------------------------------------------------------------*/
+
+/*  Misc  */
+#define XCHAL_HAVE_DEBUG_ERI		1	/* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB		0	/* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG		1	/* JTAG to debug module */
+
+/*  On-Chip Debug (OCD)  */
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR		1	/* L32DDR/S32DDR (faster OCD) */
+
+/*  TRAX (in core)  */
+#define XCHAL_HAVE_TRAX			1	/* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE		262144	/* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE	1	/* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH		0	/* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH		0	/* timestamp bitwidth, 0=none */
+
+/*  Perf counters  */
+#define XCHAL_NUM_PERF_COUNTERS		8	/* performance counters */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY		6	/* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+

329 lines not on this page · raw message

190 lines not on this page · raw message