drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBT
Subsystems (2)
PATCH 2/5 drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBT
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent.
v2: Moving the comment to intel_dsi.h(Jani)
v3: Renaming the field names (Jani)
Cc Jani Nikula <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Yetunde Adebisi <[email protected]>
Signed-off-by Deepak M <[email protected]>
---
DCS commands 0x53h and 0x54h controls the panel
PWM operations and therfore we should send these
commands to the ports mentioned in the field
"dl_panel_pwm_ports" in the VBT
DCS commands 55h and 56h controls the CABC operation and therfore we should be sending these commands to the ports specified in the field "dl_cabc_ports" in the VBT.
drivers/gpu/drm/i915/intel_bios.c | 10 ++++++++++ drivers/gpu/drm/i915/intel_bios.h | 5 ++++- drivers/gpu/drm/i915/intel_dsi.h | 9 +++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_bios.c +10 -0
@@ -749,6 +749,16 @@ parse_mipi_config(struct drm_i915_private *dev_priv,return ; } +/* +* These fields are introduced from the VBT version 197 onwards, +* so making sure that these bits are set zero in the previous +* versions. +*/ +if (dev_priv->vbt.dsi.config->dual_link && bdb->version <197 ) { + dev_priv->vbt.dsi.config->dl_cabc_ports =0 ; + dev_priv->vbt.dsi.config->dl_panel_pwm_ports =0 ; + } +/* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ; }
drivers/gpu/drm/i915/intel_bios.h +4 -1
@@ -113,7 +113,10 @@ struct mipi_config { u16 dual_link:2; u16 lane_cnt:2; u16 pixel_overlap:3; - u16 rsvd3:9; + u16 rgb_flip:1; + u16 dl_cabc_ports:2; + u16 dl_panel_pwm_ports:2; + u16 rsvd3:4;u16 rsvd4;
drivers/gpu/drm/i915/intel_dsi.h +9 -0
@@ -78,6 +78,15 @@ struct intel_dsi {u8 escape_clk_div;u8 dual_link; + +/* +* Below field will inform us on which port the panel blk_cntrl +* and CABC ON/OFF commands needs to be sent in case of dual link +* panels +*/ +u8 cabc_dcs_ports; +u8 panel_pwm_dcs_ports; +u8 pixel_overlap;u32 port_bits;u32 bw_timer;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx