drm/i915: Sharing the pixel_format_from_vbt to whole i915
Subsystems (2)
PATCH 1/2 drm/i915: Sharing the pixel_format_from_vbt to whole i915
Shared the function pixel_format_from_vbt for whole display module. Function declaration is added to intel_dsi.h.
V2: Moved the function to intel_dsi.c and renamed as per the purpose
of the function. Suggested by Jani.
Previously reviewed at https://lists.freedesktop.org/archives/intel-gfx/2016-April/091736.html
--- drivers/gpu/drm/i915/intel_dsi.c | 18 ++++++++++++++++++ drivers/gpu/drm/i915/intel_dsi.h | 1 + drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 23 +++-------------------- 3 files changed, 22 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/intel_dsi.c +18 -0
@@ -46,6 +46,24 @@ static const struct { }, }; +enum mipi_dsi_pixel_format pixel_format_from_register_bits (u32 fmt) +{ +/* It just so happens the VBT matches register contents. */ +switch (fmt) { +case VID_MODE_FORMAT_RGB888 : +return MIPI_DSI_FMT_RGB888 ; +case VID_MODE_FORMAT_RGB666 : +return MIPI_DSI_FMT_RGB666 ; +case VID_MODE_FORMAT_RGB666_PACKED : +return MIPI_DSI_FMT_RGB666_PACKED ; +case VID_MODE_FORMAT_RGB565 : +return MIPI_DSI_FMT_RGB565 ; +default : +MISSING_CASE (fmt); +return MIPI_DSI_FMT_RGB666 ; + } +} +static void wait_for_dsi_fifo_empty (struct intel_dsi *intel_dsi,enum port port) {struct drm_encoder *encoder = &intel_dsi->base.base;
drivers/gpu/drm/i915/intel_dsi.h +1 -0
@@ -134,5 +134,6 @@ extern void intel_dsi_reset_clocks(struct intel_encoder *encoder, enum port port);struct drm_panel *vbt_panel_init (struct intel_dsi *intel_dsi,u16 panel_id); +enum mipi_dsi_pixel_format pixel_format_from_register_bits (u32 fmt);#endif /* _INTEL_DSI_H */
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c +3 -20
@@ -412,25 +412,6 @@ static const struct drm_panel_funcs vbt_panel_funcs = { .get_modes = vbt_panel_get_modes, }; -/* XXX: This should be done when parsing the VBT in intel_bios.c */ -static enum mipi_dsi_pixel_format pixel_format_from_vbt (u32 fmt) -{ -/* It just so happens the VBT matches register contents. */ -switch (fmt) { -case VID_MODE_FORMAT_RGB888 : -return MIPI_DSI_FMT_RGB888 ; -case VID_MODE_FORMAT_RGB666 : -return MIPI_DSI_FMT_RGB666 ; -case VID_MODE_FORMAT_RGB666_PACKED : -return MIPI_DSI_FMT_RGB666_PACKED ; -case VID_MODE_FORMAT_RGB565 : -return MIPI_DSI_FMT_RGB565 ; -default : -MISSING_CASE (fmt); -return MIPI_DSI_FMT_RGB666 ; - } -} -struct drm_panel *vbt_panel_init (struct intel_dsi *intel_dsi,u16 panel_id) {struct drm_device *dev = intel_dsi->base.base.dev;
@@ -455,7 +436,9 @@ struct drm_panel *vbt_panel_init(struct intel_dsi *intel_dsi, u16 panel_id) intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ?0 :1 ; intel_dsi->clock_stop = mipi_config->enable_clk_stop ?1 :0 ; intel_dsi->lane_count = mipi_config->lane_cnt +1 ; - intel_dsi->pixel_format =pixel_format_from_vbt (mipi_config->videomode_color_format <<7 ); + intel_dsi->pixel_format = +pixel_format_from_register_bits ( + mipi_config->videomode_color_format <<7 ); bpp =mipi_dsi_pixel_format_to_bpp (intel_dsi->pixel_format); intel_dsi->dual_link = mipi_config->dual_link;
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915/BXT: Get pipe conf from the port registers
At BXT DSI, PIPE registers are inactive. So we can't get the PIPE's mode parameters from them. The possible option is retriving them from the PORT registers.
The required changes are added for BXT in intel_dsi_get_config (encoder->get_config).
v2: Addressed the Jani's comments
-removed the redundant call to encoder->get_config
-read bpp from port register
-removed retrival of src_size from encoder->get_configv3: pipe_config->pipe_bpp is fixed
Jani's review comments addressed:
Few horizontal timing parameters dropped from the patch to make progress, as there seems to be some disagreement on best/feasible/possible options.
Previously Reviewed at: https://lists.freedesktop.org/archives/intel-gfx/2016-April/091737.html
--- drivers/gpu/drm/i915/intel_dsi.c | 60 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
drivers/gpu/drm/i915/intel_dsi.c +60 -0
@@ -758,14 +758,74 @@ out_put_power:return active; } +static void bxt_dsi_get_pipe_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_device *dev = encoder->base.dev; +struct drm_i915_private *dev_priv = dev->dev_private; +struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +unsigned int bpp, fmt; +enum port port; +u16 vfp, vsync, vbp; + +/* +* Atleast one port is active as encoder->get_config called only if +* encoder->get_hw_state() returns true. +*/ +for_each_dsi_port (port, intel_dsi->ports) { +if (I915_READ (BXT_MIPI_PORT_CTRL (port)) &DPI_ENABLE ) +break ; + } + + fmt =I915_READ (MIPI_DSI_FUNC_PRG (port)) &VID_MODE_FORMAT_MASK ; + pipe_config->pipe_bpp = +mipi_dsi_pixel_format_to_bpp ( +pixel_format_from_register_bits (fmt)); + bpp = pipe_config->pipe_bpp; + +/* In terms of pixels */ + adjusted_mode->crtc_hdisplay = +I915_READ (BXT_MIPI_TRANS_HACTIVE (port)); + adjusted_mode->crtc_vdisplay = +I915_READ (BXT_MIPI_TRANS_VACTIVE (port)); + adjusted_mode->crtc_vtotal = +I915_READ (BXT_MIPI_TRANS_VTOTAL (port)); + +/* +* TODO: Retrieve hfp, hsync and hbp. Adjust them for dual link and +* calculate hsync_start, hsync_end, htotal and hblank_end +*/ + +/* vertical values are in terms of lines */ + vfp =I915_READ (MIPI_VFP_COUNT (port)); + vsync =I915_READ (MIPI_VSYNC_PADDING_COUNT (port)); + vbp =I915_READ (MIPI_VBP_COUNT (port)); + + adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay; + + adjusted_mode->crtc_vsync_start = + vfp + adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vsync_end = + vsync + adjusted_mode->crtc_vsync_start; + adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; +} + +static void intel_dsi_get_config (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config) { +struct drm_device *dev = encoder->base.dev;u32 pclk;DRM_DEBUG_KMS ("\n" ); pipe_config->has_dsi_encoder = true; +if (IS_BROXTON (dev)) +bxt_dsi_get_pipe_config (encoder, pipe_config); +/* * DPLL_MD is not used in case of DSI, reading will get some default value * set dpll_md = 0
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/BXT: Get pipe conf from the port registers
Quoted 18 lines · Ramalingam C
At BXT DSI, PIPE registers are inactive. So we can't get the PIPE's mode parameters from them. The possible option is retriving them from the PORT registers.
The required changes are added for BXT in
intel_dsi_get_config(encoder->get_config).v2: Addressed the Jani's comments
-removed the redundant call to encoder->get_config -read bpp from port register -removed retrival of src_size from encoder->get_configv3:
pipe_config->pipe_bppis fixed
Jani's review comments addressed:
Few horizontal timing parameters dropped from the patch to make progress, as there seems to be some disagreement on best/feasible/possible options.
Quoted 4 lines
Signed-off-by Ramalingam C <[email protected]>Signed-off-by Uma Shankar <[email protected]>Previously Reviewed at: https://lists.freedesktop.org/archives/intel-gfx/2016-April/091737.html
Both pushed to drm-intel-next-queued, thanks for the patches.
BR,
Jani.
Quoted 83 lines
--- drivers/gpu/drm/i915/intel_dsi.c | 60 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)drivers/gpu/drm/i915/intel_dsi.c +60
-0@@ -758,14 +758,74 @@ out_put_power:return active; } +static void bxt_dsi_get_pipe_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_device *dev = encoder->base.dev; +struct drm_i915_private *dev_priv = dev->dev_private; +struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +unsigned int bpp, fmt; +enum port port; +u16 vfp, vsync, vbp; + +/* +* Atleast one port is active as encoder->get_config called only if +* encoder->get_hw_state() returns true. +*/ +for_each_dsi_port (port, intel_dsi->ports) { +if (I915_READ (BXT_MIPI_PORT_CTRL (port)) &DPI_ENABLE ) +break ; + } + + fmt =I915_READ (MIPI_DSI_FUNC_PRG (port)) &VID_MODE_FORMAT_MASK ; + pipe_config->pipe_bpp = +mipi_dsi_pixel_format_to_bpp ( +pixel_format_from_register_bits (fmt)); + bpp = pipe_config->pipe_bpp; + +/* In terms of pixels */ + adjusted_mode->crtc_hdisplay = +I915_READ (BXT_MIPI_TRANS_HACTIVE (port)); + adjusted_mode->crtc_vdisplay = +I915_READ (BXT_MIPI_TRANS_VACTIVE (port)); + adjusted_mode->crtc_vtotal = +I915_READ (BXT_MIPI_TRANS_VTOTAL (port)); + +/* +* TODO: Retrieve hfp, hsync and hbp. Adjust them for dual link and +* calculate hsync_start, hsync_end, htotal and hblank_end +*/ + +/* vertical values are in terms of lines */ + vfp =I915_READ (MIPI_VFP_COUNT (port)); + vsync =I915_READ (MIPI_VSYNC_PADDING_COUNT (port)); + vbp =I915_READ (MIPI_VBP_COUNT (port)); + + adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay; + + adjusted_mode->crtc_vsync_start = + vfp + adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vsync_end = + vsync + adjusted_mode->crtc_vsync_start; + adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; +} + +static void intel_dsi_get_config (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config) { +struct drm_device *dev = encoder->base.dev;u32 pclk;DRM_DEBUG_KMS ("\n" ); pipe_config->has_dsi_encoder = true; +if (IS_BROXTON (dev)) +bxt_dsi_get_pipe_config (encoder, pipe_config); +/* * DPLL_MD is not used in case of DSI, reading will get some default value * set dpll_md = 0
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Sharing the pixel_format_from_vbt to whole i915
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Sharing the pixel_format_from_vbt to whole i915
URL : https://patchwork.freedesktop.org/series/5405/
State : failure
== Summary ==
Series 5405v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/5405/revisions/1/mbox/
Test drv_hangman:
Subgroup error-state-basic:
fail -> PASS (ilk-hp8440p)
Test drv_module_reload_basic:
dmesg-warn -> PASS (bsw-nuc-2)
Test gem_basic:
Subgroup bad-close:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup create-close:
dmesg-warn -> PASS (bsw-nuc-2)
Test gem_ctx_create:
Subgroup basic:
pass -> DMESG-WARN (bsw-nuc-2)
Test gem_ctx_param_basic:
Subgroup invalid-param-set:
pass -> DMESG-WARN (bsw-nuc-2)
Subgroup non-root-set:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup non-root-set-no-zeromap:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup root-set:
pass -> DMESG-WARN (bsw-nuc-2)
Test gem_ctx_switch:
Subgroup basic-default:
pass -> SKIP (bsw-nuc-2)
Test gem_exec_basic:
Subgroup basic-blt:
pass -> SKIP (bsw-nuc-2)
Subgroup basic-render:
skip -> PASS (bsw-nuc-2)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> SKIP (bsw-nuc-2)
Test gem_exec_whisper:
Subgroup basic:
skip -> PASS (bsw-nuc-2)
Test gem_flink_basic:
Subgroup basic:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup flink-lifetime:
dmesg-warn -> PASS (bsw-nuc-2)
Test gem_linear_blits:
Subgroup basic:
dmesg-fail -> PASS (bsw-nuc-2)
Test gem_mmap_gtt:
Subgroup basic-write-gtt:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup basic-write-read-distinct:
pass -> DMESG-WARN (bsw-nuc-2)
Test gem_pread:
Subgroup basic:
pass -> DMESG-WARN (bsw-nuc-2)
Test gem_ringfill:
Subgroup basic-default-hang:
pass -> SKIP (bsw-nuc-2)
Subgroup basic-default-interruptible:
skip -> DMESG-FAIL (bsw-nuc-2)
Test gem_sync:
Subgroup basic-all:
dmesg-fail -> PASS (bsw-nuc-2)
Subgroup basic-bsd:
skip -> PASS (bsw-nuc-2)
Subgroup basic-default:
skip -> PASS (bsw-nuc-2)
Subgroup basic-render:
incomplete -> PASS (bdw-nuci7) UNSTABLE
Subgroup basic-vebox:
skip -> PASS (bsw-nuc-2)
Test gem_tiled_fence_blits:
Subgroup basic:
dmesg-fail -> PASS (bsw-nuc-2)
Test kms_addfb_basic:
Subgroup bad-pitch-256:
pass -> DMESG-WARN (bsw-nuc-2)
Subgroup bo-too-small-due-to-tiling:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup size-max:
dmesg-warn -> PASS (bsw-nuc-2)
Subgroup too-high:
dmesg-warn -> PASS (bsw-nuc-2)
Test kms_flip:
Subgroup basic-flip-vs-modeset:
dmesg-fail -> PASS (bsw-nuc-2)
pass -> DMESG-WARN (ilk-hp8440p) UNSTABLE
Subgroup basic-flip-vs-wf_vblank:
pass -> FAIL (snb-x220t)
Test kms_force_connector_basic:
Subgroup force-connector-state:
skip -> PASS (ivb-t430s)
Subgroup prune-stale-modes:
pass -> SKIP (ilk-hp8440p)
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-b:
pass -> DMESG-WARN (ilk-hp8440p)
Test pm_rpm:
Subgroup basic-rte:
pass -> DMESG-WARN (byt-nuc) UNSTABLE
Test prime_self_import:
Subgroup basic-llseek-size:
pass -> DMESG-WARN (bsw-nuc-2)
Subgroup basic-with_one_bo_two_files:
pass -> DMESG-WARN (bsw-nuc-2)bdw-nuci7 total:196 pass:184 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:196 pass:175 dwarn:0 dfail:0 fail:0 skip:21 bsw-nuc-2 total:141 pass:80 dwarn:24 dfail:1 fail:0 skip:35 byt-nuc total:196 pass:160 dwarn:1 dfail:0 fail:0 skip:35 hsw-brixbox total:196 pass:174 dwarn:0 dfail:0 fail:0 skip:22 hsw-gt2 total:196 pass:179 dwarn:0 dfail:0 fail:0 skip:17 ilk-hp8440p total:196 pass:129 dwarn:2 dfail:0 fail:0 skip:65 ivb-t430s total:196 pass:171 dwarn:0 dfail:0 fail:0 skip:25 skl-i7k-2 total:196 pass:173 dwarn:0 dfail:0 fail:0 skip:23 skl-nuci5 total:196 pass:185 dwarn:0 dfail:0 fail:0 skip:11 snb-dellxps total:196 pass:162 dwarn:0 dfail:0 fail:0 skip:34 snb-x220t total:196 pass:161 dwarn:0 dfail:0 fail:2 skip:33
Results at /archive/results/CI_IGT_test/Patchwork_1825/
6b0bf94b75318abeab4c95fbf0507bc54d8959be drm-intel-nightly: 2016y-04m-07d-08h-29m-47s UTC integration manifest f61e309357f54fdc441fd20996225232627daa19 drm/i915/BXT: Get pipe conf from the port registers 81be0d7c63a7ef0c202434202d4f2982f5dcf304 drm/i915: Sharing the pixel_format_from_vbt to whole i915
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Sharing the pixel_format_from_vbt to whole i915
Quoted 105 lines · Patchwork
== Series Details ==
Series: series starting with [1/2] drm/i915: Sharing the
pixel_format_from_vbtto whole i915
URL : https://patchwork.freedesktop.org/series/5405/
State : failure== Summary ==
Series 5405v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/5405/revisions/1/mbox/Test
drv_hangman:Subgroup error-state-basic: fail -> PASS (ilk-hp8440p) Test drv_module_reload_basic: dmesg-warn -> PASS (bsw-nuc-2) Test gem_basic: Subgroup bad-close: dmesg-warn -> PASS (bsw-nuc-2) Subgroup create-close: dmesg-warn -> PASS (bsw-nuc-2) Test gem_ctx_create: Subgroup basic: pass -> DMESG-WARN (bsw-nuc-2) Test gem_ctx_param_basic: Subgroup invalid-param-set: pass -> DMESG-WARN (bsw-nuc-2) Subgroup non-root-set: dmesg-warn -> PASS (bsw-nuc-2) Subgroup non-root-set-no-zeromap: dmesg-warn -> PASS (bsw-nuc-2) Subgroup root-set: pass -> DMESG-WARN (bsw-nuc-2) Test gem_ctx_switch: Subgroup basic-default: pass -> SKIP (bsw-nuc-2) Test gem_exec_basic: Subgroup basic-blt: pass -> SKIP (bsw-nuc-2) Subgroup basic-render: skip -> PASS (bsw-nuc-2) Test gem_exec_suspend: Subgroup basic-s3: pass -> SKIP (bsw-nuc-2) Test gem_exec_whisper: Subgroup basic: skip -> PASS (bsw-nuc-2) Test gem_flink_basic: Subgroup basic: dmesg-warn -> PASS (bsw-nuc-2) Subgroup flink-lifetime: dmesg-warn -> PASS (bsw-nuc-2) Test gem_linear_blits: Subgroup basic: dmesg-fail -> PASS (bsw-nuc-2) Test gem_mmap_gtt: Subgroup basic-write-gtt: dmesg-warn -> PASS (bsw-nuc-2) Subgroup basic-write-read-distinct: pass -> DMESG-WARN (bsw-nuc-2) Test gem_pread: Subgroup basic: pass -> DMESG-WARN (bsw-nuc-2) Test gem_ringfill: Subgroup basic-default-hang: pass -> SKIP (bsw-nuc-2) Subgroup basic-default-interruptible: skip -> DMESG-FAIL (bsw-nuc-2) Test gem_sync: Subgroup basic-all: dmesg-fail -> PASS (bsw-nuc-2) Subgroup basic-bsd: skip -> PASS (bsw-nuc-2) Subgroup basic-default: skip -> PASS (bsw-nuc-2) Subgroup basic-render: incomplete -> PASS (bdw-nuci7) UNSTABLE Subgroup basic-vebox: skip -> PASS (bsw-nuc-2) Test gem_tiled_fence_blits: Subgroup basic: dmesg-fail -> PASS (bsw-nuc-2) Test kms_addfb_basic: Subgroup bad-pitch-256: pass -> DMESG-WARN (bsw-nuc-2) Subgroup bo-too-small-due-to-tiling: dmesg-warn -> PASS (bsw-nuc-2) Subgroup size-max: dmesg-warn -> PASS (bsw-nuc-2) Subgroup too-high: dmesg-warn -> PASS (bsw-nuc-2) Test kms_flip: Subgroup basic-flip-vs-modeset: dmesg-fail -> PASS (bsw-nuc-2) pass -> DMESG-WARN (ilk-hp8440p) UNSTABLE Subgroup basic-flip-vs-wf_vblank: pass -> FAIL (snb-x220t) Test kms_force_connector_basic: Subgroup force-connector-state: skip -> PASS (ivb-t430s) Subgroup prune-stale-modes: pass -> SKIP (ilk-hp8440p) Test kms_pipe_crc_basic: Subgroup hang-read-crc-pipe-b: pass -> DMESG-WARN (ilk-hp8440p)
Quoted 8 lines
Test
pm_rpm:Subgroup basic-rte: pass -> DMESG-WARN (byt-nuc) UNSTABLE Test prime_self_import: Subgroup basic-llseek-size: pass -> DMESG-WARN (bsw-nuc-2) Subgroup basic-with_one_bo_two_files: pass -> DMESG-WARN (bsw-nuc-2)
*sigh*, there's pretty much no way the patches could cause any of
this. :(
BR,
Jani.
Quoted 24 lines
bdw-nuci7 total:196 pass:184 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:196 pass:175 dwarn:0 dfail:0 fail:0 skip:21 bsw-nuc-2 total:141 pass:80 dwarn:24 dfail:1 fail:0 skip:35 byt-nuc total:196 pass:160 dwarn:1 dfail:0 fail:0 skip:35 hsw-brixbox total:196 pass:174 dwarn:0 dfail:0 fail:0 skip:22 hsw-gt2 total:196 pass:179 dwarn:0 dfail:0 fail:0 skip:17 ilk-hp8440p total:196 pass:129 dwarn:2 dfail:0 fail:0 skip:65 ivb-t430s total:196 pass:171 dwarn:0 dfail:0 fail:0 skip:25 skl-i7k-2 total:196 pass:173 dwarn:0 dfail:0 fail:0 skip:23 skl-nuci5 total:196 pass:185 dwarn:0 dfail:0 fail:0 skip:11 snb-dellxps total:196 pass:162 dwarn:0 dfail:0 fail:0 skip:34 snb-x220t total:196 pass:161 dwarn:0 dfail:0 fail:2 skip:33Results at /archive/results/CI_IGT_test/Patchwork_1825/
6b0bf94b75318abeab4c95fbf0507bc54d8959bedrm-intel-nightly: 2016y-04m-07d-08h-29m-47s UTC integration manifestf61e309357f54fdc441fd20996225232627daa19drm/i915/BXT: Get pipe conf from the port registers81be0d7c63a7ef0c202434202d4f2982f5dcf304drm/i915: Sharing thepixel_format_from_vbtto whole i915_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Sharing the pixel_format_from_vbt to whole i915
Quoted 6 lines · On Thursday 07 April 2016 15:58:12 Jani Nikula wrote:
*sigh*, there's pretty much no way the patches could cause any of
this. :(BR,
Jani.
I'm guessing that the IGT randomized testing order is hiding problems ... can't really reproduce easily. I kind of liked the old system better.
BSW isn't feeling well, anyway.
Tomi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx