patch "xhci: fix 10 second timeout on removal of PCI hotpluggable xhci" added to usb-linus
Subsystems (3)
This is a note to let you know that I've just added the patch titled
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
Quoted 1 line
From
98d74f9ceaefc2b6c4a6440050163a83be0abedeMon Sep 17 00:00:00 2001
From: Mathias Nyman <[email protected]>
Date: Fri, 8 Apr 2016 16:25:10 +0300
Subject: xhci: fix 10 second timeout on removal of PCI hotpluggable xhci
controllers
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected.
Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset.
For now the flag is only set for PCI connected host controllers.
--- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-ring.c | 3 ++- drivers/usb/host/xhci.c | 8 +++++--- drivers/usb/host/xhci.h | 1 + 4 files changed, 9 insertions(+), 4 deletions(-)
drivers/usb/host/xhci-pci.c +1 -0
@@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)struct xhci_hcd *xhci; xhci =hcd_to_xhci (pci_get_drvdata (dev)); + xhci->xhc_state |=XHCI_STATE_REMOVING ;if (xhci->shared_hcd) {usb_remove_hcd (xhci->shared_hcd);usb_put_hcd (xhci->shared_hcd);
drivers/usb/host/xhci-ring.c +2 -1
@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,int reserved_trbs = xhci->cmd_ring_reserved_trbs;int ret; -if (xhci->xhc_state) { +if ((xhci->xhc_state &XHCI_STATE_DYING ) || + (xhci->xhc_state &XHCI_STATE_HALTED )) {xhci_dbg (xhci,"xHCI dying or halted, can't queue_command\n" );return -ESHUTDOWN ; }
drivers/usb/host/xhci.c +5 -3
@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)"waited %u microseconds.\n" , XHCI_MAX_HALT_USEC);if (!ret) - xhci->xhc_state &= ~(XHCI_STATE_HALTED |XHCI_STATE_DYING ); +/* clear state flags. Including dying, halted or removing */ + xhci->xhc_state =0 ;return ret; }
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)if (ret <=0 )return ret; xhci =hcd_to_xhci (hcd); -if (xhci->xhc_state &XHCI_STATE_DYING ) +if ((xhci->xhc_state &XHCI_STATE_DYING ) || + (xhci->xhc_state &XHCI_STATE_REMOVING ))return -ENODEV ;xhci_dbg (xhci,"%s called for udev %p\n" , __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,mutex_lock (&xhci->mutex); -if (xhci->xhc_state)/* dying or halted */ +if (xhci->xhc_state)/* dying, removing or halted */ goto out;if (!udev->slot_id) {
drivers/usb/host/xhci.h +1 -0
@@ -1605,6 +1605,7 @@ struct xhci_hcd {*/ #define XHCI_STATE_DYING (1 << 0)#define XHCI_STATE_HALTED (1 << 1) +#define XHCI_STATE_REMOVING (1 << 2)/* Statistics */ int error_bitmask;unsigned int quirks;
Signature · 1 line
2.8.0